IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v194y2020ics0360544219325484.html
   My bibliography  Save this article

“Performance comparison of innovative spiral shaped solar collector design with conventional flat plate solar collector”

Author

Listed:
  • Verma, Sujit Kumar
  • Sharma, Kamal
  • Gupta, Naveen Kumar
  • Soni, Pawan
  • Upadhyay, Neeraj

Abstract

Flat plate solar collector is an essential device, which facilitate direct application of solar energy for water heating in household and industrial sector. Existing Flat plate solar collectors (FPSC) suffers from stagnant and comparatively low efficiency. Further research to improve efficiency of FPSC by inculcating innovative design is necessary. To fill the gap, the presented work is an experimental investigation of an innovative design and fabrication approach which deals with analysis of flat plate solar collector efficiency. Design modifications of solar collector always offer an important alternative to achieve significant effect on thermal efficiency. In this work single spiral shaped collector tube as compare to number of riser tubes connected with headers in conventional type flat plate solar collector has been developed. Keeping all other parameters similar to conventional design, it has been observed very encouraging outcomes in efficiencies of solar collector. Under forced mode of testing, enhancement in thermal efficiency achieved is, 21.94% compared to conventional flat plate collector design. Enhancement in exergy efficiency is 6.73%. Overall material saving is about ∼30% and cost of manufacturing and maintenance can be significantly reduced at equivalent performance of conventional collector.

Suggested Citation

  • Verma, Sujit Kumar & Sharma, Kamal & Gupta, Naveen Kumar & Soni, Pawan & Upadhyay, Neeraj, 2020. "“Performance comparison of innovative spiral shaped solar collector design with conventional flat plate solar collector”," Energy, Elsevier, vol. 194(C).
    • Handle: RePEc:eee:energy:v:194:y:2020:i:c:s0360544219325484
    DOI: 10.1016/j.energy.2019.116853
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219325484
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116853?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yassen, Tadahmun A. & Mokhlif, Nassir D. & Eleiwi, Muhammad Asmail, 2019. "Performance investigation of an integrated solar water heater with corrugated absorber surface for domestic use," Renewable Energy, Elsevier, vol. 138(C), pages 852-860.
    2. Tanaka, Hiroshi, 2011. "Solar thermal collector augmented by flat plate booster reflector: Optimum inclination of collector and reflector," Applied Energy, Elsevier, vol. 88(4), pages 1395-1404, April.
    3. Pandey, Krishna Murari & Chaurasiya, Rajesh, 2017. "A review on analysis and development of solar flat plate collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 641-650.
    4. Colangelo, Gianpiero & Favale, Ernani & de Risi, Arturo & Laforgia, Domenico, 2013. "A new solution for reduced sedimentation flat panel solar thermal collector using nanofluids," Applied Energy, Elsevier, vol. 111(C), pages 80-93.
    5. Rey, Anthony & Zmeureanu, Radu, 2018. "Multi-objective optimization framework for the selection of configuration and equipment sizing of solar thermal combisystems," Energy, Elsevier, vol. 145(C), pages 182-194.
    6. Tewari, Kirti & Dev, Rahul, 2019. "Exergy, environmental and economic analysis of modified domestic solar water heater with glass-to-glass PV module," Energy, Elsevier, vol. 170(C), pages 1130-1150.
    7. Murugan, M. & Vijayan, R. & Saravanan, A. & Jaisankar, S., 2019. "Performance enhancement of centrally finned twist inserted solar collector using corrugated booster reflectors," Energy, Elsevier, vol. 168(C), pages 858-869.
    8. Luminosu, I. & Fara, L., 2005. "Determination of the optimal operation mode of a flat solar collector by exergetic analysis and numerical simulation," Energy, Elsevier, vol. 30(5), pages 731-747.
    9. Khamis Mansour, M., 2013. "Thermal analysis of novel minichannel-based solar flat-plate collector," Energy, Elsevier, vol. 60(C), pages 333-343.
    10. Ural, Tolga, 2019. "Experimental performance assessment of a new flat-plate solar air collector having textile fabric as absorber using energy and exergy analyses," Energy, Elsevier, vol. 188(C).
    11. Zhou, Liqun & Wang, Yiping & Huang, Qunwu, 2019. "Parametric analysis on the performance of flat plate collector with transparent insulation material," Energy, Elsevier, vol. 174(C), pages 534-542.
    12. Allouhi, A. & Benzakour Amine, M. & Buker, M.S. & Kousksou, T. & Jamil, A., 2019. "Forced-circulation solar water heating system using heat pipe-flat plate collectors: Energy and exergy analysis," Energy, Elsevier, vol. 180(C), pages 429-443.
    13. Alvarez, A. & Cabeza, O. & Muñiz, M.C. & Varela, L.M., 2010. "Experimental and numerical investigation of a flat-plate solar collector," Energy, Elsevier, vol. 35(9), pages 3707-3716.
    14. Cruz-Peragon, F. & Palomar, J.M. & Casanova, P.J. & Dorado, M.P. & Manzano-Agugliaro, F., 2012. "Characterization of solar flat plate collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(3), pages 1709-1720.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Radwan, Ali & Abo-Zahhad, Essam M. & El-Sharkawy, Ibrahim I. & Said, Zafar & Abdelrehim, Osama & Memon, Saim & Cheng, Ping & Soliman, Ahmed Saad, 2024. "Thermal analysis of a bifacial vacuum-based solar thermal collector," Energy, Elsevier, vol. 294(C).
    2. Abu Shadate Faisal Mahamude & Wan Sharuzi Wan Harun & Kumaran Kadirgama & Devarajan Ramasamy & Kaniz Farhana & Khalid Saleh & Talal Yusaf, 2022. "Experimental Study on the Efficiency Improvement of Flat Plate Solar Collectors Using Hybrid Nanofluids Graphene/Waste Cotton," Energies, MDPI, vol. 15(7), pages 1-27, March.
    3. Filipović, P. & Dović, D. & Horvat, I. & Ranilović, B., 2023. "Evaluation of a novel polymer solar collector using numerical and experimental methods," Energy, Elsevier, vol. 284(C).
    4. Hosseinzadeh, Mohammad & Sadeghirad, Reza & Zamani, Hosein & Kianifar, Ali & Mirzababaee, Seyyed Mahdi, 2021. "The performance improvement of an indirect solar cooker using multi-walled carbon nanotube-oil nanofluid: An experimental study with thermodynamic analysis," Renewable Energy, Elsevier, vol. 165(P1), pages 14-24.
    5. Mukhamad Faeshol Umam & Md. Hasanuzzaman & Nasrudin Abd Rahim, 2022. "Global Advancement of Nanofluid-Based Sheet and Tube Collectors for a Photovoltaic Thermal System," Energies, MDPI, vol. 15(15), pages 1-37, August.
    6. Abu-Hamdeh, Nidal H. & Oztop, Hakan F. & Alnefaie, Khalid A. & Wae-hayee, Makatar, 2020. "Hydrothermal irreversibility analysis based on multi-criteria assessment in a modified spiral piping system utilized in solar ponds," Renewable Energy, Elsevier, vol. 162(C), pages 355-370.
    7. Sharma, Harish Kumar & Kumar, Satish & Verma, Sujit Kumar, 2022. "Comparative performance analysis of flat plate solar collector having circular &trapezoidal corrugated absorber plate designs," Energy, Elsevier, vol. 253(C).
    8. Abdallah Elshawadfy Elwakeel & Mohsen A. Gameh & Awad Ali Tayoush Oraiath & Ahmed S. Eissa & Salah Elsayed & Wael M. Elmessery & Mostafa B. Mostafa & Sadeq K. Alhag & Laila A. Al-Shuraym & Moustapha E, 2024. "Development and Techno-Economic Analysis of a Tracked Indirect Forced Solar Dryer Integrated Photovoltaic System for Drying Tomatoes," Sustainability, MDPI, vol. 16(16), pages 1-29, August.
    9. Sina Jafari & Ali Sohani & Siamak Hoseinzadeh & Fathollah Pourfayaz, 2022. "The 3E Optimal Location Assessment of Flat-Plate Solar Collectors for Domestic Applications in Iran," Energies, MDPI, vol. 15(10), pages 1-17, May.
    10. Ham, Jeonggyun & Shin, Yunchan & Cho, Honghyun, 2022. "Comparison of thermal performance between a surface and a volumetric absorption solar collector using water and Fe3O4 nanofluid," Energy, Elsevier, vol. 239(PC).
    11. Ma, Ruihua & Ma, Dongyan & Ma, Ruijiang & Long, Enshen, 2022. "Theoretical and experimental analysis of temperature variation of V–Ti black ceramic solar collector," Renewable Energy, Elsevier, vol. 194(C), pages 1153-1162.
    12. Kareem, M.W. & Habib, Khairul & Pasha, Amjad A. & Irshad, Kashif & Afolabi, L.O. & Saha, Bidyut Baran, 2022. "Experimental study of multi-pass solar air thermal collector system assisted with sensible energy-storing matrix," Energy, Elsevier, vol. 245(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sharma, Harish Kumar & Kumar, Satish & Verma, Sujit Kumar, 2022. "Comparative performance analysis of flat plate solar collector having circular &trapezoidal corrugated absorber plate designs," Energy, Elsevier, vol. 253(C).
    2. Zhou, Liqun & Wang, Yiping & Huang, Qunwu, 2019. "Parametric analysis on the performance of flat plate collector with transparent insulation material," Energy, Elsevier, vol. 174(C), pages 534-542.
    3. Saffarian, Mohammad Reza & Moravej, Mojtaba & Doranehgard, Mohammad Hossein, 2020. "Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid," Renewable Energy, Elsevier, vol. 146(C), pages 2316-2329.
    4. Seyed Reza Shamshirgaran & Hussain H. Al-Kayiem & Korada V. Sharma & Mostafa Ghasemi, 2020. "State of the Art of Techno-Economics of Nanofluid-Laden Flat-Plate Solar Collectors for Sustainable Accomplishment," Sustainability, MDPI, vol. 12(21), pages 1-52, November.
    5. Filipović, P. & Dović, D. & Horvat, I. & Ranilović, B., 2023. "Evaluation of a novel polymer solar collector using numerical and experimental methods," Energy, Elsevier, vol. 284(C).
    6. Ma, Tao & Li, Meng & Kazemian, Arash, 2020. "Photovoltaic thermal module and solar thermal collector connected in series to produce electricity and high-grade heat simultaneously," Applied Energy, Elsevier, vol. 261(C).
    7. Shukla, Ruchi & Sumathy, K. & Erickson, Phillip & Gong, Jiawei, 2013. "Recent advances in the solar water heating systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 173-190.
    8. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    9. Tabish Alam & Nagesh Babu Balam & Kishor Sitaram Kulkarni & Md Irfanul Haque Siddiqui & Nishant Raj Kapoor & Chandan Swaroop Meena & Ashok Kumar & Raffaello Cozzolino, 2021. "Performance Augmentation of the Flat Plate Solar Thermal Collector: A Review," Energies, MDPI, vol. 14(19), pages 1-23, September.
    10. Liu, He & Tian, You & Liu, Jia'ao & Zhang, Dongwei & Wu, Xuehong & Li, Zengyao, 2023. "Performance analysis of solar drying system with sunlight transparent thermally insulating aerogels," Energy, Elsevier, vol. 269(C).
    11. Farzan, Hadi & Ameri, Mehran & Mahmoudi, Mojtaba, 2023. "Thermal assessment of a new planar thermal diode integrated collector storage solar water heater in different partial vacuums: An experimental study," Renewable Energy, Elsevier, vol. 208(C), pages 119-129.
    12. Arun Uniyal & Yogesh K. Prajapati & Lalit Ranakoti & Prabhakar Bhandari & Tej Singh & Brijesh Gangil & Shubham Sharma & Viyat Varun Upadhyay & Sayed M. Eldin, 2022. "Recent Advancements in Evacuated Tube Solar Water Heaters: A Critical Review of the Integration of Phase Change Materials and Nanofluids with ETCs," Energies, MDPI, vol. 15(23), pages 1-25, November.
    13. Jilani, G. & Thomas, Ciby, 2015. "Thermal performance characteristics of an absorber plate fin having temperature dependent thermal conductivity and overall loss coefficient," Energy, Elsevier, vol. 86(C), pages 1-8.
    14. Ana Cristina Ferreira & Angela Silva & José Carlos Teixeira & Senhorinha Teixeira, 2020. "Multi-Objective Optimization of Solar Thermal Systems Applied to Portuguese Dwellings," Energies, MDPI, vol. 13(24), pages 1-23, December.
    15. Tagliafico, Luca A. & Scarpa, Federico & De Rosa, Mattia, 2014. "Dynamic thermal models and CFD analysis for flat-plate thermal solar collectors – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 526-537.
    16. Zuhair Qamar & Anjum Munir & Timothy Langrish & Abdul Ghafoor & Muhammad Tahir, 2023. "Experimental and Numerical Simulations of a Solar Air Heater for Maximal Value Addition to Agricultural Products," Agriculture, MDPI, vol. 13(2), pages 1-17, February.
    17. Sudhir Kumar Pathak & Tagamud Tazmeen & K. Chopra & V. V. Tyagi & Sanjeev Anand & Ammar M. Abdulateef & A. K. Pandey, 2023. "Sustainable Energy Progress via Integration of Thermal Energy Storage and Other Performance Enhancement Strategies in FPCs: A Synergistic Review," Sustainability, MDPI, vol. 15(18), pages 1-37, September.
    18. abbas, Sajid & Yuan, Yanping & Hassan, Atazaz & Zhou, Jinzhi & Zeng, Chao & Yu, Min & Emmanuel, Bisengimana, 2022. "Experimental and numerical investigation on a solar direct-expansion heat pump system employing PV/T & solar thermal collector as evaporator," Energy, Elsevier, vol. 254(PB).
    19. Vahidinia, F. & Khorasanizadeh, H., 2021. "Development of new algebraic derivations to analyze minichannel solar flat plate collectors with small and large size minichannels and performance evaluation study," Energy, Elsevier, vol. 228(C).
    20. Muhammad, Mahmud Jamil & Muhammad, Isa Adamu & Sidik, Nor Azwadi Che & Yazid, Muhammad Noor Afiq Witri Muhammad & Mamat, Rizalman & Najafi, G., 2016. "The use of nanofluids for enhancing the thermal performance of stationary solar collectors: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 63(C), pages 226-236.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:194:y:2020:i:c:s0360544219325484. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.