IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v191y2020ics0360544219321796.html
   My bibliography  Save this article

Constructal design for supercharged boiler superheater

Author

Listed:
  • Feng, Huijun
  • Xie, Zhuojun
  • Chen, Lingen
  • Wu, Zhixiang
  • Xia, Shaojun

Abstract

Constructal design of a SB superheater is carried out under the prerequisite of fixed total heat exchange area to realize its performance improvement. A complex function (CF) which consists of the heat transfer rate and power consumption of the SB superheater is considered as the optimization objective, and the tube outer diameter (TOD), number of tubes per row (NTPR) and number of the tube rows (NTR) are optimized, respectively. The optimal construct and corresponding optimal performance of the SB superheater are obtained. The influences of the heat preservation coefficient (HPC), excess air coefficient (ECA) and fuel consumption rate (FCR) on the optimization results are investigated. The research results indicate that compared with the initial performances of the superheater, the CFs after primary optimizations for the variables of TOD, NTPR and NTR are reduced by 2.6%, 0.9% and 2.6%, respectively. The CF can be further reduced by double and triple optimizations, respectively. Augmenting the HPC, ECA and FCR can all boost the overall performance of the boiler superheater. The weight coefficient has both quantitative and qualitative effects on the optimal results. The research results gained from this paper can be of theoretical assistances to the structure designs of different SB superheaters.

Suggested Citation

  • Feng, Huijun & Xie, Zhuojun & Chen, Lingen & Wu, Zhixiang & Xia, Shaojun, 2020. "Constructal design for supercharged boiler superheater," Energy, Elsevier, vol. 191(C).
    • Handle: RePEc:eee:energy:v:191:y:2020:i:c:s0360544219321796
    DOI: 10.1016/j.energy.2019.116484
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219321796
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116484?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Feng, Huijun & Chen, Lingen & Xie, Zhihui & Sun, Fengrui, 2015. "“Disc-point” heat and mass transfer constructal optimization for solid–gas reactors based on entropy generation minimization," Energy, Elsevier, vol. 83(C), pages 431-437.
    2. Liu, Xiong & Chen, Lingen & Feng, Huijun & Qin, Xiaoyong & Sun, Fengrui, 2016. "Constructal design of a blast furnace iron-making process based on multi-objective optimization," Energy, Elsevier, vol. 109(C), pages 137-151.
    3. Mehrgoo, Morteza & Amidpour, Majid, 2017. "Constructal design and optimization of a dual pressure heat recovery steam generator," Energy, Elsevier, vol. 124(C), pages 87-99.
    4. Maakala, Viljami & Järvinen, Mika & Vuorinen, Ville, 2018. "Optimizing the heat transfer performance of the recovery boiler superheaters using simulated annealing, surrogate modeling, and computational fluid dynamics," Energy, Elsevier, vol. 160(C), pages 361-377.
    5. Wu, Zhixiang & Feng, Huijun & Chen, Lingen & Xie, Zhuojun & Cai, Cunguang, 2019. "Pumping power minimization of an evaporator in ocean thermal energy conversion system based on constructal theory," Energy, Elsevier, vol. 181(C), pages 974-984.
    6. Hazarika, Saheera Azmi & Bhanja, Dipankar & Nath, Sujit & Kundu, Balaram, 2015. "Analytical solution to predict performance and optimum design parameters of a constructal T-shaped fin with simultaneous heat and mass transfer," Energy, Elsevier, vol. 84(C), pages 303-316.
    7. Hajmohammadi, M.R. & Rahmani, M. & Campo, A. & Joneydi Shariatzadeh, O., 2014. "Optimal design of unequal heat flux elements for optimized heat transfer inside a rectangular duct," Energy, Elsevier, vol. 68(C), pages 609-616.
    8. Feng, Huijun & Chen, Lingen & Xie, Zhihui & Ding, Zemin & Sun, Fengrui, 2014. "Generalized constructal optimization for solidification heat transfer process of slab continuous casting based on heat loss rate," Energy, Elsevier, vol. 66(C), pages 991-998.
    9. Azad, Abazar Vahdat & Amidpour, Majid, 2011. "Economic optimization of shell and tube heat exchanger based on constructal theory," Energy, Elsevier, vol. 36(2), pages 1087-1096.
    10. Salimpour, Mohammad Reza & Menbari, Amir, 2015. "Analytical optimization of constructal channels used for cooling a ring shaped body based on minimum flow and thermal resistances," Energy, Elsevier, vol. 81(C), pages 645-651.
    11. Liu, Xiong & Feng, Huijun & Chen, Lingen & Qin, Xiaoyong & Sun, Fengrui, 2016. "Hot metal yield optimization of a blast furnace based on constructal theory," Energy, Elsevier, vol. 104(C), pages 33-41.
    12. Robbe, M. & Sciubba, E., 2009. "Derivation of the optimal internal cooling geometry of a prismatic slab: Comparison of constructal and non-constructal geometries," Energy, Elsevier, vol. 34(12), pages 2167-2174.
    13. Salimpour, Mohammad Reza & Menbari, Amir, 2014. "Constructal design of cooling channels embedded in a ring-shaped heat-generating body," Energy, Elsevier, vol. 73(C), pages 302-310.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Chong, Daotong & Yan, Junjie, 2020. "Entropy generation distribution characteristics of a supercritical boiler superheater during transient processes," Energy, Elsevier, vol. 201(C).
    2. Huijun Feng & Lingen Chen & Wei Tang & Yanlin Ge, 2022. "Optimal Design of a Dual-Pressure Steam Turbine for Rankine Cycle Based on Constructal Theory," Energies, MDPI, vol. 15(13), pages 1-20, July.
    3. Li, Guolong & Li, Yanjun & Fang, Chengyue & Su, Jian & Wang, Haotong & Sun, Shengdi & Zhang, Guolei & Shi, Jianxin, 2023. "Research on fault diagnosis of supercharged boiler with limited data based on few-shot learning," Energy, Elsevier, vol. 281(C).
    4. Dongliang Li & Shaojun Xia & Jianghua Geng & Fankai Meng & Yutao Chen & Guoqing Zhu, 2022. "Discriminability Analysis of Characterization Parameters in Micro-Leakage of Turbocharged Boiler’s Evaporation Tube," Energies, MDPI, vol. 15(22), pages 1-20, November.
    5. Huijun Feng & Wei Tang & Lingen Chen & Junchao Shi & Zhixiang Wu, 2021. "Multi-Objective Constructal Optimization for Marine Condensers," Energies, MDPI, vol. 14(17), pages 1-18, September.
    6. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Yan, Junjie, 2021. "Thermodynamic optimization of the superheater during switching the load transient processes," Energy, Elsevier, vol. 218(C).
    7. Zhu, Meng & Zhou, Jing & Chen, Lei & Su, Sheng & Hu, Song & Qing, Haoran & Li, Aishu & Wang, Yi & Zhong, Wenqi & Xiang, Jun, 2022. "Economic analysis and cost modeling of supercritical CO2 coal-fired boiler based on global optimization," Energy, Elsevier, vol. 239(PD).
    8. Li, Zhaojin & Bi, Yuehong & Wang, Cun & Shi, Qi & Mou, Tianhong, 2023. "Finite time thermodynamic optimization for performance of absorption energy storage systems," Energy, Elsevier, vol. 282(C).
    9. Tang, Wei & Feng, Huijun & Chen, Lingen & Xie, Zhuojun & Shi, Junchao, 2021. "Constructal design for a boiler economizer," Energy, Elsevier, vol. 223(C).
    10. Canpolat Tosun, Demet & Açıkkalp, Emin & Altuntas, Onder & Hepbasli, Arif & Palmero-Marrero, Ana I. & Borge-Diez, David, 2023. "Dynamic performance and sustainability assessment of a PV driven Carnot battery," Energy, Elsevier, vol. 278(C).
    11. Niu, Jintao & Wang, Jiansheng & Liu, Xueling, 2023. "Thermodynamic and economic analysis of organic Rankine cycle combined with flash cycle and ejector," Energy, Elsevier, vol. 282(C).
    12. Liu, Xinxin & Zhao, Junhui & He, Chao & Liu, Liang & Li, Gang & Pan, Xiaohui & Xu, Guizhuan & Lu, Chaoyang & Zhang, Quanguo & Jiao, Youzhou, 2023. "A new approach for evaluating photosynthetic bio-hydrogen production: The dissipation rate method," Energy, Elsevier, vol. 284(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tang, Wei & Feng, Huijun & Chen, Lingen & Xie, Zhuojun & Shi, Junchao, 2021. "Constructal design for a boiler economizer," Energy, Elsevier, vol. 223(C).
    2. Huijun Feng & Wei Tang & Lingen Chen & Junchao Shi & Zhixiang Wu, 2021. "Multi-Objective Constructal Optimization for Marine Condensers," Energies, MDPI, vol. 14(17), pages 1-18, September.
    3. Liu, Changxin & Xie, Zhihui & Sun, Fengrui & Chen, Lingen, 2017. "Exergy analysis and optimization of coking process," Energy, Elsevier, vol. 139(C), pages 694-705.
    4. Wu, Zhixiang & Feng, Huijun & Chen, Lingen & Xie, Zhuojun & Cai, Cunguang, 2019. "Pumping power minimization of an evaporator in ocean thermal energy conversion system based on constructal theory," Energy, Elsevier, vol. 181(C), pages 974-984.
    5. Hu, Xianzhong & Yu, Qingbo, 2018. "Effect of the elevated initial temperature on the laminar flame speeds of oxy-methane mixtures," Energy, Elsevier, vol. 147(C), pages 876-883.
    6. Salimpour, Mohammad Reza & Menbari, Amir, 2015. "Analytical optimization of constructal channels used for cooling a ring shaped body based on minimum flow and thermal resistances," Energy, Elsevier, vol. 81(C), pages 645-651.
    7. Liu, Xiong & Chen, Lingen & Feng, Huijun & Qin, Xiaoyong & Sun, Fengrui, 2016. "Constructal design of a blast furnace iron-making process based on multi-objective optimization," Energy, Elsevier, vol. 109(C), pages 137-151.
    8. Feng, Huijun & Chen, Lingen & Xie, Zhihui & Sun, Fengrui, 2015. "“Disc-point” heat and mass transfer constructal optimization for solid–gas reactors based on entropy generation minimization," Energy, Elsevier, vol. 83(C), pages 431-437.
    9. Gong, Changming & Si, Xiankai & Wang, Kang & Wei, Fuxing & Liu, Fenghua, 2018. "Numerical analysis of carbon monoxide, formaldehyde and unburned methanol emissions with ozone addition from a direct-injection spark-ignition methanol engine," Energy, Elsevier, vol. 144(C), pages 432-442.
    10. Mazzetti, Marit J. & Hagen, Brede A.L. & Skaugen, Geir & Lindqvist, Karl & Lundberg, Steinar & Kristensen, Oddrun A., 2021. "Achieving 50% weight reduction of offshore steam bottoming cycles," Energy, Elsevier, vol. 230(C).
    11. Trumpy, Eugenio & Bertani, Ruggero & Manzella, Adele & Sander, Marietta, 2015. "The web-oriented framework of the world geothermal production database: A business intelligence platform for wide data distribution and analysis," Renewable Energy, Elsevier, vol. 74(C), pages 379-389.
    12. Li, You-Rong & Du, Mei-Tang & Wu, Shuang-Ying & Peng, Lan & Liu, Chao, 2012. "Exergoeconomic analysis and optimization of a condenser for a binary mixture of vapors in organic Rankine cycle," Energy, Elsevier, vol. 40(1), pages 341-347.
    13. Deng, Han & Skaugen, Geir & Næss, Erling & Zhang, Mingjie & Øiseth, Ole A., 2021. "A novel methodology for design optimization of heat recovery steam generators with flow-induced vibration analysis," Energy, Elsevier, vol. 226(C).
    14. Liu, Hanyu & Xi, Kun & Xie, Zhihui & Lu, Zhuoqun & Chen, Huawei & Zhang, Jian & Ge, Yanlin, 2023. "Constructal design of double-layer asymmetric flower baffles," Energy, Elsevier, vol. 280(C).
    15. Heidar Sadeghzadeh & Mehdi Aliehyaei & Marc A. Rosen, 2015. "Optimization of a Finned Shell and Tube Heat Exchanger Using a Multi-Objective Optimization Genetic Algorithm," Sustainability, MDPI, vol. 7(9), pages 1-17, August.
    16. Katulić, Stjepko & Čehil, Mislav & Schneider, Daniel Rolph, 2018. "Thermodynamic efficiency improvement of combined cycle power plant's bottom cycle based on organic working fluids," Energy, Elsevier, vol. 147(C), pages 36-50.
    17. Darbandi, Masoud & Fatin, Ali & Bordbar, Hadi, 2020. "Numerical study on NOx reduction in a large-scale heavy fuel oil-fired boiler using suitable burner adjustments," Energy, Elsevier, vol. 199(C).
    18. Kler, Aleksandr M. & Zharkov, Pavel V. & Epishkin, Nikolai O., 2019. "Parametric optimization of supercritical power plants using gradient methods," Energy, Elsevier, vol. 189(C).
    19. Cai, Liuxi & Xiao, Junfeng & Wang, Shunsen & Gao, Song & Duan, Jingyao & Mao, Jingru, 2017. "Gas-particle flows and erosion characteristic of large capacity dry top gas pressure recovery turbine," Energy, Elsevier, vol. 120(C), pages 498-506.
    20. Sun, Yongqi & Seetharaman, Seshadri & Liu, Qianyi & Zhang, Zuotai & Liu, Lili & Wang, Xidong, 2016. "Integrated biomass gasification using the waste heat from hot slags: Control of syngas and polluting gas releases," Energy, Elsevier, vol. 114(C), pages 165-176.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:191:y:2020:i:c:s0360544219321796. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.