IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v173y2019icp926-936.html
   My bibliography  Save this article

The use of pressure hot water storage tanks to improve the energy flexibility of the steam power unit

Author

Listed:
  • Trojan, Marcin
  • Taler, Dawid
  • Dzierwa, Piotr
  • Taler, Jan
  • Kaczmarski, Karol
  • Wrona, Jan

Abstract

Existing thermal power plants must be adapted to cooperate with wind farms and other renewable energy sources by improving their flexibility. The paper analyzes the improvement of the 200MWe block's flexibility by installing hot water storage tanks. The maximum increase in the block output resulting from the shut-off of low-pressure steam bleeds is calculated. During this period, the hot water from water storage tanks is supplied to the boiler. Hot water is accumulated in pressure water tanks during the low-load period of the unit. Water with design temperature in the feed water tank flows into the water pressure tanks to reduce the electric power of the unit in the off-peak night hours. The hot water accumulated during the night in storage tanks is used to feed the boiler during the period of peak demand for electricity. The reduction in the block electric power was calculated for various volumes and charging periods of the water storage tanks. A cost analysis was carried out to demonstrate the economic profitability of installation of pressure water accumulators. It is worth mentioning that hot water tanks may also be applied to fill the boiler evaporator with hot water before the start-up of the power unit from the cold state.

Suggested Citation

  • Trojan, Marcin & Taler, Dawid & Dzierwa, Piotr & Taler, Jan & Kaczmarski, Karol & Wrona, Jan, 2019. "The use of pressure hot water storage tanks to improve the energy flexibility of the steam power unit," Energy, Elsevier, vol. 173(C), pages 926-936.
    • Handle: RePEc:eee:energy:v:173:y:2019:i:c:p:926-936
    DOI: 10.1016/j.energy.2019.02.059
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219302531
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.02.059?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Taler, Jan & Dzierwa, Piotr & Taler, Dawid & Harchut, Piotr, 2015. "Optimization of the boiler start-up taking into account thermal stresses," Energy, Elsevier, vol. 92(P1), pages 160-170.
    2. Yang, Zheng & Chen, Haisheng & Wang, Liang & Sheng, Yong & Wang, Yifei, 2016. "Comparative study of the influences of different water tank shapes on thermal energy storage capacity and thermal stratification," Renewable Energy, Elsevier, vol. 85(C), pages 31-44.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Di & Liu, Deying & Wang, Chaonan & Zhou, Yunlong & Li, Xiaoli & Yang, Mei, 2022. "Flexibility improvement method of coal-fired thermal power plant based on the multi-scale utilization of steam turbine energy storage," Energy, Elsevier, vol. 239(PD).
    2. Bravo, Julio & Abdulridha, Ahmed & Wang, Shuoyu & Matrone, Dominic & Yao, Zheng & Neti, Sudhakar & Naito, Clay & Quiel, Spencer & Suleiman, Muhannad & Romero, Carlos, 2023. "Design and experimental testing of a 150 kWh thermal battery using thermosiphons embedded in a concrete matrix for power plant flexible operation," Energy, Elsevier, vol. 277(C).
    3. Bartnik, Ryszard & Buryn, Zbigniew & Hnydiuk-Stefan, Anna, 2021. "Thermodynamic and economic analysis of effect of heat accumulator volume on the specific cost of heat production in the gas-steam CHP plant," Energy, Elsevier, vol. 230(C).
    4. Taler, Jan & Trojan, Marcin & Dzierwa, Piotr & Kaczmarski, Karol & Węglowski, Bohdan & Taler, Dawid & Zima, Wiesław & Grądziel, Sławomir & Ocłoń, Paweł & Sobota, Tomasz & Rerak, Monika & Jaremkiewicz,, 2023. "The flexible boiler operation in a wide range of load changes with considering the strength and environmental restrictions," Energy, Elsevier, vol. 263(PB).
    5. Dzierwa, Piotr & Taler, Jan & Peret, Patryk & Taler, Dawid & Trojan, Marcin, 2022. "Transient CFD simulation of charging hot water tank," Energy, Elsevier, vol. 239(PC).
    6. Taler, Dawid & Dzierwa, Piotr & Kaczmarski, Karol & Taler, Jan, 2021. "Optimisation of heating and cooling of pressure thick-walled components operating in the saturated steam area," Energy, Elsevier, vol. 231(C).
    7. Fabian Borst & Nina Strobel & Thomas Kohne & Matthias Weigold, 2021. "Investigating the Electrical Demand-Side Management Potential of Industrial Steam Supply Systems Using Dynamic Simulation," Energies, MDPI, vol. 14(6), pages 1-20, March.
    8. Liu, Kairui & Wang, Chao & Wang, Limin & Liu, Bin & Ye, Maojing & Guo, Yalong & Che, Defu, 2023. "Dynamic performance analysis and control strategy optimization for supercritical coal-fired boiler: A dynamic simulation," Energy, Elsevier, vol. 282(C).
    9. Wang, Runchen & Du, Xiaonan & Shi, Yuetao & Deng, Weipeng & Wang, Yuhao & Sun, Fengzhong, 2024. "A novel system for reducing power plant electricity consumption and enhancing deep peak-load capability," Energy, Elsevier, vol. 295(C).
    10. Shi, Xingping & He, Qing & Liu, Yixue & An, Xugang & Zhang, Qianxu & Du, Dongmei, 2024. "Thermodynamic and techno-economic analysis of a novel compressed air energy storage system coupled with coal-fired power unit," Energy, Elsevier, vol. 292(C).
    11. Liu, Zefeng & Wang, Chaoyang & Fan, Jianlin & Liu, Ming & Xing, Yong & Yan, Junjie, 2024. "Enhancing the flexibility and stability of coal-fired power plants by optimizing control schemes of throttling high-pressure extraction steam," Energy, Elsevier, vol. 288(C).
    12. Nenad Sarunac & Javad Khalesi & Mahfuja A. Khuda & Rick Mancini & Pramod Kulkarni & Joel Berger, 2024. "Energy Storage Improves Power Plant Flexibility and Economic Performance," Energies, MDPI, vol. 17(11), pages 1-26, June.
    13. Liang Tian & Xinping Liu & Huanhuan Luo & Tuoyu Deng & Jizhen Liu & Guiping Zhou & Tianting Zhang, 2021. "Soft Sensor of Heating Extraction Steam Flow Rate Based on Frequency Complementary Information Fusion for CHP Plant," Energies, MDPI, vol. 14(12), pages 1-17, June.
    14. Wang, Zhu & Liu, Ming & Yan, Hui & Yan, Junjie, 2022. "Optimization on coordinate control strategy assisted by high-pressure extraction steam throttling to achieve flexible and efficient operation of thermal power plants," Energy, Elsevier, vol. 244(PA).
    15. Taler, Dawid & Kaczmarski, Karol & Dzierwa, Piotr & Taler, Jan & Trojan, Marcin, 2024. "Optimisation of the cooling of pressurised thick-walled components operating with fluid at saturation temperature," Energy, Elsevier, vol. 290(C).
    16. Dawid Taler & Jan Taler & Tomasz Sobota & Jarosław Tokarczyk, 2022. "Cooling Modelling of an Electrically Heated Ceramic Heat Accumulator," Energies, MDPI, vol. 15(16), pages 1-26, August.
    17. Yan, Hui & Liu, Ming & Wang, Zhu & Zhang, Kezhen & Chong, Daotong & Yan, Junjie, 2023. "Flexibility enhancement of solar-aided coal-fired power plant under different direct normal irradiance conditions," Energy, Elsevier, vol. 262(PA).
    18. Yuliang Dong & Songyuan Yu & Chengbing He & Qingbin Yu & Fang Fang, 2022. "Optimal Multi-Mode Flexibility Operation of CHP Units with Electrode Type Electric Boilers: A Case Study," Energies, MDPI, vol. 15(24), pages 1-21, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Agnieszka Malec & Tomasz Cholewa & Alicja Siuta-Olcha, 2021. "Influence of Cold Water Inlets and Obstacles on the Energy Efficiency of the Hot Water Production Process in a Hot Water Storage Tank," Energies, MDPI, vol. 14(20), pages 1-26, October.
    2. Andrzej Rusin & Martyna Tomala & Henryk Łukowicz & Grzegorz Nowak & Wojciech Kosman, 2021. "On-Line Control of Stresses in the Power Unit Pressure Elements Taking Account of Variable Heat Transfer Conditions," Energies, MDPI, vol. 14(15), pages 1-21, August.
    3. Wunvisa Tipasri & Amnart Suksri & Karthikeyan Velmurugan & Tanakorn Wongwuttanasatian, 2022. "Energy Management for an Air Conditioning System Using a Storage Device to Reduce the On-Peak Power Consumption," Energies, MDPI, vol. 15(23), pages 1-19, November.
    4. Romero-Anton, N. & Martin-Escudero, K. & Portillo-Valdés, L.A. & Gómez-Elvira, I. & Salazar-Herran, E., 2018. "Improvement of auxiliary BI-DRUM boiler operation by dynamic simulation," Energy, Elsevier, vol. 148(C), pages 676-686.
    5. Sterkhov, K.V. & Khokhlov, D.A. & Zaichenko, M.N., 2024. "Zero carbon emission CCGT power plant with integrated solid fuel gasification," Energy, Elsevier, vol. 294(C).
    6. Erik Rosado-Tamariz & Miguel A. Zuniga-Garcia & Alfonso Campos-Amezcua & Rafael Batres, 2020. "A Framework for the Synthesis of Optimum Operating Profiles Based on Dynamic Simulation and a Micro Genetic Algorithm," Energies, MDPI, vol. 13(3), pages 1-23, February.
    7. Taler, Dawid & Dzierwa, Piotr & Taler, Jan, 2020. "New method for determining the optimum fluid temperature when heating pressure thick-walled components with openings," Energy, Elsevier, vol. 200(C).
    8. Sreepradha, Chandrasekharan & Panda, Rames Chandra & Bhuvaneswari, Natrajan Swaminathan, 2017. "Mathematical model for integrated coal fired thermal boiler using physical laws," Energy, Elsevier, vol. 118(C), pages 985-998.
    9. Grądziel, Sławomir, 2019. "Analysis of thermal and flow phenomena in natural circulation boiler evaporator," Energy, Elsevier, vol. 172(C), pages 881-891.
    10. Lutsenko, Nickolay A. & Fetsov, Sergey S., 2020. "Effect of side walls shape on charging and discharging performance of thermal energy storages based on granular phase change materials," Renewable Energy, Elsevier, vol. 162(C), pages 466-477.
    11. Neshumayev, Dmitri & Rummel, Leo & Konist, Alar & Ots, Arvo & Parve, Teet, 2018. "Power plant fuel consumption rate during load cycling," Applied Energy, Elsevier, vol. 224(C), pages 124-135.
    12. Taler, Jan & Trojan, Marcin & Dzierwa, Piotr & Kaczmarski, Karol & Węglowski, Bohdan & Taler, Dawid & Zima, Wiesław & Grądziel, Sławomir & Ocłoń, Paweł & Sobota, Tomasz & Rerak, Monika & Jaremkiewicz,, 2023. "The flexible boiler operation in a wide range of load changes with considering the strength and environmental restrictions," Energy, Elsevier, vol. 263(PB).
    13. Hübel, Moritz & Meinke, Sebastian & Andrén, Marcus T. & Wedding, Christoffer & Nocke, Jürgen & Gierow, Conrad & Hassel, Egon & Funkquist, Jonas, 2017. "Modelling and simulation of a coal-fired power plant for start-up optimisation," Applied Energy, Elsevier, vol. 208(C), pages 319-331.
    14. Li, Yong & Hu, Bing & Wang, Dengjia & Liu, Hui & Liu, Yanfeng & Haghighat, Fariborz, 2023. "Enhancing the performance of solar water heating systems: Application of double-layer phase change materials," Renewable Energy, Elsevier, vol. 219(P1).
    15. Kurşun, Burak & Ökten, Korhan, 2018. "Effect of rectangular hot water tank position and aspect ratio on thermal stratification enhancement," Renewable Energy, Elsevier, vol. 116(PA), pages 639-646.
    16. Khurana, Hitesh & Majumdar, Rudrodip & Saha, Sandip K., 2022. "Response Surface Methodology-based prediction model for working fluid temperature during stand-alone operation of vertical cylindrical thermal energy storage tank," Renewable Energy, Elsevier, vol. 188(C), pages 619-636.
    17. Taler, Jan & Taler, Dawid, 2024. "Analysis of the possibility of reducing the heating time of thick-walled cylindrical components with holes," Energy, Elsevier, vol. 303(C).
    18. Rúa, Jairo & Nord, Lars O., 2020. "Optimal control of flexible natural gas combined cycles with stress monitoring: Linear vs nonlinear model predictive control," Applied Energy, Elsevier, vol. 265(C).
    19. Cisek, Piotr & Taler, Dawid, 2019. "Numerical analysis and performance assessment of the Thermal Energy Storage unit aimed to be utilized in Smart Electric Thermal Storage (SETS)," Energy, Elsevier, vol. 173(C), pages 755-771.
    20. Rendall, Joseph & Abu-Heiba, Ahmad & Gluesenkamp, Kyle & Nawaz, Kashif & Worek, William & Elatar, Ahmed, 2021. "Nondimensional convection numbers modeling thermally stratified storage tanks: Richardson's number and hot-water tanks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:173:y:2019:i:c:p:926-936. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.