IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v143y2018icp219-240.html
   My bibliography  Save this article

Generation of data sets for semi-empirical models of circulated fluidized bed boilers using hybrid Euler-Lagrange technique

Author

Listed:
  • Adamczyk, Wojciech P.
  • Myöhänen, Kari
  • Hartge, Ernst-Ulrich
  • Ritvanen, Jouni
  • Klimanek, Adam
  • Hyppänen, Timo
  • Białecki, Ryszard A.

Abstract

The primary goal when designing a CFB boiler is to ensure its high energy efficiency. Additional constraints come from environmental regulations, which are constantly becoming more difficult to assess, and require improvements in the boiler design process. Local on-site measurements are often restricted to short distances inward from the furnace wall, leaving most of the core unmeasured. Computer simulations are practically the only feasible tools to investigate the combustion processes and to support the design of CFB units. Three-dimensional steady-state semi-empirical CFB furnace models predict adequate results within reasonable times but these models require tuning to existing objects, which obviously excludes their application for new object design. The present study represents a step toward using the hybrid Euler–Lagrange (HEL) technique to model flow variables in order to replace the measured data. The information collected using the HEL model for an arbitrary furnace can be used to tune a semi-empirical model. To validate the HEL model, measurements of a 235 MWe CFB were used. The simulations show good agreement between the numerical and experimental results, indicating that the presented idea is worth investigating in the future.

Suggested Citation

  • Adamczyk, Wojciech P. & Myöhänen, Kari & Hartge, Ernst-Ulrich & Ritvanen, Jouni & Klimanek, Adam & Hyppänen, Timo & Białecki, Ryszard A., 2018. "Generation of data sets for semi-empirical models of circulated fluidized bed boilers using hybrid Euler-Lagrange technique," Energy, Elsevier, vol. 143(C), pages 219-240.
    • Handle: RePEc:eee:energy:v:143:y:2018:i:c:p:219-240
    DOI: 10.1016/j.energy.2017.10.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217316985
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.10.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Qinhui & Luo, Zhongyang & Li, Xuantian & Fang, Mengxiang & Ni, Mingjiang & Cen, Kefa, 1999. "A mathematical model for a circulating fluidized bed (CFB) boiler," Energy, Elsevier, vol. 24(7), pages 633-653.
    2. Adamczyk, Wojciech P. & Bialecki, Ryszard A. & Ditaranto, Mario & Gladysz, Pawel & Haugen, Nils Erland L. & Katelbach-Wozniak, Anna & Klimanek, Adam & Sladek, Slawomir & Szlek, Andrzej & Wecel, Gabrie, 2017. "CFD modeling and thermodynamic analysis of a concept of a MILD-OXY combustion large scale pulverized coal boiler," Energy, Elsevier, vol. 140(P1), pages 1305-1315.
    3. Seddighi, Sadegh, 2017. "Design of large scale oxy-fuel fluidized bed boilers: Constant thermal power and constant furnace size scenarios," Energy, Elsevier, vol. 118(C), pages 1286-1294.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alobaid, Falah & Peters, Jens & Amro, Rami & Epple, Bernd, 2020. "Dynamic process simulation for Polish lignite combustion in a 1MWth circulating fluidized bed during load changes," Applied Energy, Elsevier, vol. 278(C).
    2. Xuemin Liu & Hairui Yang & Junfu Lyu, 2020. "Optimization of Fluidization State of a Circulating Fluidized Bed Boiler for Economical Operation," Energies, MDPI, vol. 13(2), pages 1-20, January.
    3. Grochowalski, Jaroslaw & Jachymek, Piotr & Andrzejczyk, Marek & Klajny, Marcin & Widuch, Agata & Morkisz, Pawel & Hernik, Bartłomiej & Zdeb, Janusz & Adamczyk, Wojciech, 2021. "Towards application of machine learning algorithms for prediction temperature distribution within CFB boiler based on specified operating conditions," Energy, Elsevier, vol. 237(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohammadpour, Mohammadreza & Ashjaee, Mehdi & Houshfar, Ehsan, 2022. "Thermal performance and heat transfer characteristics analyses of oxy-biogas combustion in a swirl stabilized boiler under various oxidizing environments," Energy, Elsevier, vol. 261(PA).
    2. Jozaalizadeh, Toomaj & Toghraie, Davood, 2019. "Numerical investigation behavior of reacting flow for flameless oxidation technology of MILD combustion: Effect of fluctuating temperature of inlet co-flow," Energy, Elsevier, vol. 178(C), pages 530-537.
    3. Xuemin Liu & Hairui Yang & Junfu Lyu, 2020. "Optimization of Fluidization State of a Circulating Fluidized Bed Boiler for Economical Operation," Energies, MDPI, vol. 13(2), pages 1-20, January.
    4. Darbandi, Masoud & Fatin, Ali & Bordbar, Hadi, 2020. "Numerical study on NOx reduction in a large-scale heavy fuel oil-fired boiler using suitable burner adjustments," Energy, Elsevier, vol. 199(C).
    5. Li, Zhiyi & Ferrarotti, Marco & Cuoci, Alberto & Parente, Alessandro, 2018. "Finite-rate chemistry modelling of non-conventional combustion regimes using a Partially-Stirred Reactor closure: Combustion model formulation and implementation details," Applied Energy, Elsevier, vol. 225(C), pages 637-655.
    6. Seddighi, Sadegh & Clough, Peter T. & Anthony, Edward J. & Hughes, Robin W. & Lu, Ping, 2018. "Scale-up challenges and opportunities for carbon capture by oxy-fuel circulating fluidized beds," Applied Energy, Elsevier, vol. 232(C), pages 527-542.
    7. Moon, Ji-Hong & Jo, Sung-Ho & Park, Sung Jin & Khoi, Nguyen Hoang & Seo, Myung Won & Ra, Ho Won & Yoon, Sang-Jun & Yoon, Sung-Min & Lee, Jae-Goo & Mun, Tae-Young, 2019. "Carbon dioxide purity and combustion characteristics of oxy firing compared to air firing in a pilot-scale circulating fluidized bed," Energy, Elsevier, vol. 166(C), pages 183-192.
    8. Madejski, Paweł & Żymełka, Piotr, 2020. "Calculation methods of steam boiler operation factors under varying operating conditions with the use of computational thermodynamic modeling," Energy, Elsevier, vol. 197(C).
    9. Alobaid, Falah & Peters, Jens & Amro, Rami & Epple, Bernd, 2020. "Dynamic process simulation for Polish lignite combustion in a 1MWth circulating fluidized bed during load changes," Applied Energy, Elsevier, vol. 278(C).
    10. Bashtani, Javad & Seddighi, Sadegh & Bahrabadi-Jovein, Iman, 2018. "Control of nitrogen oxide formation in power generation using modified reaction kinetics and mixing," Energy, Elsevier, vol. 145(C), pages 567-581.
    11. Tian, Ye & Zhou, Xiong & Ji, Xuanyu & Bai, Jisong & Yuan, Liang, 2019. "Applying moderate or intense low-oxygen dilution combustion to a co-axial-jet I-shaped recuperative radiant tube for further performance enhancement," Energy, Elsevier, vol. 171(C), pages 149-160.
    12. Wu, Haiqian & Kuang, Min & Wang, Jialin & Zhao, Xiaojuan & Yang, Guohua & Ti, Shuguang & Ding, Jieyi, 2020. "Lower-arch location effect on the flow field, coal combustion, and NOx formation characteristics in a cascade-arch, down-fired furnace," Applied Energy, Elsevier, vol. 268(C).
    13. Gładysz, Paweł & Stanek, Wojciech & Czarnowska, Lucyna & Sładek, Sławomir & Szlęk, Andrzej, 2018. "Thermo-ecological evaluation of an integrated MILD oxy-fuel combustion power plant with CO2 capture, utilisation, and storage – A case study in Poland," Energy, Elsevier, vol. 144(C), pages 379-392.
    14. Sładek, Sławomir & Katelbach-Woźniak, Anna & Adamczyk, Wojciech P. & Klimanek, Adam & Korus, Agnieszka & Szlęk, Andrzej, 2020. "Procedure for in-fly particle temperature detection under combustion conditions," Energy, Elsevier, vol. 191(C).
    15. Peng, Wanxi & Liu, Zhenling & Motahari-Nezhad, Mohsen & Banisaeed, Mohammad & Shahraki, Saeid & Beheshti, Mehdi, 2016. "A detailed study of oxy-fuel combustion of biomass in a circulating fluidized bed (CFB) combustor: Evaluation of catalytic performance of metal nanoparticles (Al, Ni) for combustion efficiency improve," Energy, Elsevier, vol. 109(C), pages 1139-1147.
    16. Li, Zhengkuan & Tian, Songfeng & Zhang, Du & Chang, Chengzhi & Zhang, Qian & Zhang, Peijie, 2022. "Optimization study on improving energy efficiency of power cycle system of staged coal gasification coupled with supercritical carbon dioxide," Energy, Elsevier, vol. 239(PC).
    17. Abdolahi-Mansoorkhani, Hamed & Seddighi, Sadegh, 2019. "H2S and CO2 capture from gaseous fuels using nanoparticle membrane," Energy, Elsevier, vol. 168(C), pages 847-857.
    18. Zhuo, Xusheng & Lou, Chun & Zhou, Huaichun & Zhuo, Jinxuan & Fu, Peifang, 2018. "Hierarchical Takagi-Sugeno fuzzy hyperbolic tangent static model control for a circulating fluidized bed boiler thermal power unit," Energy, Elsevier, vol. 162(C), pages 910-917.
    19. Gungor, Afsin, 2009. "Second law analysis of heat transfer surfaces in circulating fluidized beds," Applied Energy, Elsevier, vol. 86(7-8), pages 1344-1353, July.
    20. Paweł Ziółkowski & Stanisław Głuch & Piotr Józef Ziółkowski & Janusz Badur, 2022. "Compact High Efficiency and Zero-Emission Gas-Fired Power Plant with Oxy-Combustion and Carbon Capture," Energies, MDPI, vol. 15(7), pages 1-39, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:143:y:2018:i:c:p:219-240. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.