IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v137y2017icp302-313.html
   My bibliography  Save this article

Effect of number and arrangement of separator electrode assembly (SEA) on the performance of square tubular PEM fuel cells

Author

Listed:
  • Mohammadi-Ahmar, Akbar
  • Solati, Ali
  • Osanloo, Behzad
  • Hatami, Mohammad

Abstract

The effect of intermediate electrode on the performance of the square tubular PEMFC was studied in the present paper. Four different configurations were developed and evaluated for the first time, namely: simple square tubular (without intermediate electrode i.e. Simple), double parallel intermediate electrode (DPIE), double bisectors intermediate electrode (DBIE) and triple parallel intermediate electrode (TPIE). Calculations were performed maintaining the same active area and boundary conditions for all four configurations. The results of polarization curves showed that the insertion of the intermediate electrode increases current density, and leads to higher consumption of reactants and better performance of PEMFC. Employing the intermediate electrode not only does not cause any additional cost compared to simple square tubular configuration, but also the cost is reduced in comparison to the base model due to the reduction of fuel cell length. The results also revealed that the intermediate electrode arrangement also has a significant influence on the performance of PEM fuel cell; For instance, DPIE compared to DBIE delivers higher power and has better performance. Moreover, it was proved that the addition of more than one intermediate electrode layer increases the pressure drop dramatically which fades the advantage of increasing power output.

Suggested Citation

  • Mohammadi-Ahmar, Akbar & Solati, Ali & Osanloo, Behzad & Hatami, Mohammad, 2017. "Effect of number and arrangement of separator electrode assembly (SEA) on the performance of square tubular PEM fuel cells," Energy, Elsevier, vol. 137(C), pages 302-313.
    • Handle: RePEc:eee:energy:v:137:y:2017:i:c:p:302-313
    DOI: 10.1016/j.energy.2017.07.021
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217311969
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.07.021?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Arun Saco, S. & Thundil Karuppa Raj, R. & Karthikeyan, P., 2016. "A study on scaled up proton exchange membrane fuel cell with various flow channels for optimizing power output by effective water management using numerical technique," Energy, Elsevier, vol. 113(C), pages 558-573.
    2. khazaee, I. & Sabadbafan, H., 2016. "Effect of humidity content and direction of the flow of reactant gases on water management in the 4-serpentine and 1-serpentine flow channel in a PEM (proton exchange membrane) fuel cell," Energy, Elsevier, vol. 101(C), pages 252-265.
    3. Carton, J.G. & Olabi, A.G., 2010. "Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell," Energy, Elsevier, vol. 35(7), pages 2796-2806.
    4. Rostami, Leila & Mohamad Gholy Nejad, Puriya & Vatani, Ali, 2016. "A numerical investigation of serpentine flow channel with different bend sizes in polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 97(C), pages 400-410.
    5. Cano-Andrade, S. & Hernandez-Guerrero, A. & von Spakovsky, M.R. & Damian-Ascencio, C.E. & Rubio-Arana, J.C., 2010. "Current density and polarization curves for radial flow field patterns applied to PEMFCs (Proton Exchange Membrane Fuel Cells)," Energy, Elsevier, vol. 35(2), pages 920-927.
    6. Perng, Shiang-Wuu & Wu, Horng-Wen & Shih, Gin-Jang, 2015. "Effect of prominent gas diffusion layer (GDL) on non-isothermal transport characteristics and cell performance of a proton exchange membrane fuel cell (PEMFC)," Energy, Elsevier, vol. 88(C), pages 126-138.
    7. Sasmito, Agus P. & Kurnia, Jundika C. & Mujumdar, Arun S., 2012. "Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks," Energy, Elsevier, vol. 44(1), pages 278-291.
    8. Sherif, S.A. & Barbir, Frano & Veziroglu, T.N., 2005. "Towards a Hydrogen Economy," The Electricity Journal, Elsevier, vol. 18(6), pages 62-76, July.
    9. Sadiq Al-Baghdadi, Maher A.R. & Shahad Al-Janabi, Haroun A.K., 2007. "Parametric and optimization study of a PEM fuel cell performance using three-dimensional computational fluid dynamics model," Renewable Energy, Elsevier, vol. 32(7), pages 1077-1101.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lei Yuan & Zunlong Jin & Penghui Yang & Youchen Yang & Dingbiao Wang & Xiaotang Chen, 2021. "Numerical Analysis of the Influence of Different Flow Patterns on Power and Reactant Transmission in Tubular-Shaped PEMFC," Energies, MDPI, vol. 14(8), pages 1-16, April.
    2. Asensio, F.J. & San Martín, J.I. & Zamora, I. & Saldaña, G. & Oñederra, O., 2019. "Analysis of electrochemical and thermal models and modeling techniques for polymer electrolyte membrane fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    3. Solati, Ali & Nasiri, Behzad & Mohammadi-Ahmar, Akbar & Mohammadi, Kamyar & Safari, Amir Hossein, 2019. "Numerical investigation of the effect of different layers configurations on the performance of radial PEM fuel cells," Renewable Energy, Elsevier, vol. 143(C), pages 1877-1889.
    4. Cha, Dowon & Jeon, Seung Won & Yang, Wonseok & Kim, Dongwoo & Kim, Yongchan, 2018. "Comparative performance evaluation of self-humidifying PEMFCs with short-side-chain and long-side-chain membranes under various operating conditions," Energy, Elsevier, vol. 150(C), pages 320-328.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yin, Cong & Gao, Jianlong & Wen, Xuhui & Xie, Guangyou & Yang, Chunhua & Fang, Honglin & Tang, Hao, 2016. "In situ investigation of proton exchange membrane fuel cell performance with novel segmented cell design and a two-phase flow model," Energy, Elsevier, vol. 113(C), pages 1071-1089.
    2. Suprava Chakraborty & Devaraj Elangovan & Karthikeyan Palaniswamy & Ashley Fly & Dineshkumar Ravi & Denis Ashok Sathia Seelan & Thundil Karuppa Raj Rajagopal, 2022. "A Review on the Numerical Studies on the Performance of Proton Exchange Membrane Fuel Cell (PEMFC) Flow Channel Designs for Automotive Applications," Energies, MDPI, vol. 15(24), pages 1-21, December.
    3. Chowdhury, Mohammad Ziauddin & Timurkutluk, Bora, 2018. "Transport phenomena of convergent and divergent serpentine flow fields for PEMFC," Energy, Elsevier, vol. 161(C), pages 104-117.
    4. Rahgoshay, S.M. & Ranjbar, A.A. & Ramiar, A. & Alizadeh, E., 2017. "Thermal investigation of a PEM fuel cell with cooling flow field," Energy, Elsevier, vol. 134(C), pages 61-73.
    5. Rocha, C. & Knöri, T. & Ribeirinha, P. & Gazdzicki, P., 2024. "A review on flow field design for proton exchange membrane fuel cells: Challenges to increase the active area for MW applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    6. Movahedi, M. & Ramiar, A. & Ranjber, A.A., 2018. "3D numerical investigation of clamping pressure effect on the performance of proton exchange membrane fuel cell with interdigitated flow field," Energy, Elsevier, vol. 142(C), pages 617-632.
    7. Xu, Liangfei & Fang, Chuan & Hu, Junming & Cheng, Siliang & Li, Jianqiu & Ouyang, Minggao & Lehnert, Werner, 2017. "Parameter extraction of polymer electrolyte membrane fuel cell based on quasi-dynamic model and periphery signals," Energy, Elsevier, vol. 122(C), pages 675-690.
    8. Xiong, Kangning & Wu, Wei & Wang, Shuangfeng & Zhang, Lin, 2021. "Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review," Applied Energy, Elsevier, vol. 301(C).
    9. Sadiq T. Bunyan & Hayder A. Dhahad & Dhamyaa S. Khudhur & Talal Yusaf, 2023. "The Effect of Flow Field Design Parameters on the Performance of PEMFC: A Review," Sustainability, MDPI, vol. 15(13), pages 1-62, June.
    10. Afshari, E. & Mosharaf-Dehkordi, M. & Rajabian, H., 2017. "An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor," Energy, Elsevier, vol. 118(C), pages 705-715.
    11. Kim, Ah-Reum & Jung, Hye-Mi & Um, Sukkee, 2014. "An engineering approach to optimal metallic bipolar plate designs reflecting gas diffusion layer compression effects," Energy, Elsevier, vol. 66(C), pages 50-55.
    12. Ren, Zhijun & Zhang, Dongming & Wang, Zaiyi, 2012. "Stacks with TiN/titanium as the bipolar plate for PEMFCs," Energy, Elsevier, vol. 48(1), pages 577-581.
    13. Boyaci San, Fatma Gül & Isik-Gulsac, Isil & Okur, Osman, 2013. "Analysis of the polymer composite bipolar plate properties on the performance of PEMFC (polymer electrolyte membrane fuel cells) by RSM (response surface methodology)," Energy, Elsevier, vol. 55(C), pages 1067-1075.
    14. Sasmito, Agus P. & Kurnia, Jundika C. & Mujumdar, Arun S., 2012. "Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks," Energy, Elsevier, vol. 44(1), pages 278-291.
    15. Ashrafi, Moosa & Kanani, Homayoon & Shams, Mehrzad, 2018. "Numerical and experimental study of two-phase flow uniformity in channels of parallel PEM fuel cells with modified Z-type flow-fields," Energy, Elsevier, vol. 147(C), pages 317-328.
    16. Liu, Yongfeng & Wang, Na & Pei, Pucheng & Yao, Shengzhuo & Wang, Fang, 2018. "Asymptotic analysis of anode relative humidity effects on the fastest voltage decay single cell in a stack," Energy, Elsevier, vol. 151(C), pages 490-500.
    17. Chien, Chi-Hui & Hu, Yao-Lun & Su, Ting-Hsuan & Liu, Hsuan-Ting & Wang, Chung-Ting & Yang, Ping-Feng & Lu, Ying-Xu, 2016. "Effects of bolt pre-loading variations on performance of GDL in a bolted PEMFC by 3-D FEM analysis," Energy, Elsevier, vol. 113(C), pages 1174-1187.
    18. Rakhshanpouri, S. & Rowshanzamir, S., 2013. "Water transport through a PEM (proton exchange membrane) fuel cell in a seven-layer model," Energy, Elsevier, vol. 50(C), pages 220-231.
    19. Cai, Yonghua & Fang, Zhou & Chen, Ben & Yang, Tianqi & Tu, Zhengkai, 2018. "Numerical study on a novel 3D cathode flow field and evaluation criteria for the PEM fuel cell design," Energy, Elsevier, vol. 161(C), pages 28-37.
    20. Parnian, Mohammad Javad & Rowshanzamir, Soosan & Gashoul, Fatemeh, 2017. "Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel ," Energy, Elsevier, vol. 125(C), pages 614-628.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:137:y:2017:i:c:p:302-313. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.