IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i9p3156-3168.html
   My bibliography  Save this article

Design of a novel axial impeller as a part of counter-rotating axial compressor to compress water vapor as refrigerant

Author

Listed:
  • Li, Qubo
  • Piechna, Janusz
  • Müller, Norbert

Abstract

A systematic investigation to understand the use of a novel axial impeller as a part of counter-rotating axial compressor to compress water vapor as refrigerant was undertaken. Blade angle was investigated at first to understand this novel impeller’s geometry. A commercial CFD package, which solves the Reynolds-averaged Navier–Stokes equations, was used to compute the complex flow field of the impeller. Two hub/shroud tip ratios with different speed ratios were numerically simulated. The numerical simulation focused on the water vapor flow from compressor impeller inlet to outlet and the overall performance level and range were predicted. The numerical investigation revealed that at hub/shroud tip ratio of 0.54, maximum pressure ratio reached about 1.24 with isentropic efficiency around 75% at its design point. Detailed investigation into flow structure showed that a serious secondary flow exists between span ranges of 30–50%. An enlargement of hub/shroud tip ratio to 0.75 showed that pressure ratio had been improved significantly. By comparing different speed ratios and hub/shroud tip ratios, the study shows potential to utilize this novel axial impeller to compress water vapor as refrigerant.

Suggested Citation

  • Li, Qubo & Piechna, Janusz & Müller, Norbert, 2011. "Design of a novel axial impeller as a part of counter-rotating axial compressor to compress water vapor as refrigerant," Applied Energy, Elsevier, vol. 88(9), pages 3156-3168.
    • Handle: RePEc:eee:appene:v:88:y:2011:i:9:p:3156-3168
    DOI: 10.1016/j.apenergy.2011.02.024
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261911001231
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2011.02.024?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Benini, Ernesto & Biollo, Roberto, 2007. "Aerodynamics of swept and leaned transonic compressor-rotors," Applied Energy, Elsevier, vol. 84(10), pages 1012-1027, October.
    2. Jiao, Kui & Sun, Harold & Li, Xianguo & Wu, Hao & Krivitzky, Eric & Schram, Tim & Larosiliere, Louis M., 2009. "Numerical simulation of air flow through turbocharger compressors with dual volute design," Applied Energy, Elsevier, vol. 86(11), pages 2494-2506, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hu, Bin & Wu, Di & Wang, R.Z., 2018. "Water vapor compression and its various applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 92-107.
    2. Chua, K.J. & Chou, S.K. & Yang, W.M. & Yan, J., 2013. "Achieving better energy-efficient air conditioning – A review of technologies and strategies," Applied Energy, Elsevier, vol. 104(C), pages 87-104.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Qubo & Piechna, Janusz & Müller, Norbert, 2011. "Numerical simulation of novel axial impeller patterns to compress water vapor as refrigerant," Energy, Elsevier, vol. 36(5), pages 2773-2781.
    2. Li, Zhihui & Liu, Yanming, 2017. "Blade-end treatment for axial compressors based on optimization method," Energy, Elsevier, vol. 126(C), pages 217-230.
    3. Lu, Hanan & Li, Qiushi & Pan, Tianyu, 2016. "Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency," Energy, Elsevier, vol. 106(C), pages 590-601.
    4. Feneley, Adam J. & Pesiridis, Apostolos & Andwari, Amin Mahmoudzadeh, 2017. "Variable Geometry Turbocharger Technologies for Exhaust Energy Recovery and Boosting‐A Review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 959-975.
    5. Bontempo, R. & Cardone, M. & Manna, M. & Vorraro, G., 2017. "A statistical approach to the analysis of the surge phenomenon," Energy, Elsevier, vol. 124(C), pages 502-509.
    6. Ruoyu Wang & Xianjun Yu & Baojie Liu & Guangfeng An, 2022. "Effects of Loading Level on the Variation of Flow Losses in Subsonic Axial Compressors," Energies, MDPI, vol. 15(17), pages 1-21, August.
    7. Fu, Jianqin & Wang, Huailin & Sun, Xilei & Bao, Huanhuan & Wang, Xun & Liu, Jingping, 2024. "Multi-objective optimization for impeller structure parameters of fuel cell air compressor using linear-based boosting model and reference vector guided evolutionary algorithm," Applied Energy, Elsevier, vol. 363(C).
    8. Wei Tian & Defeng Du & Juntong Li & Zhiqiang Han & Wenbin Yu, 2020. "Establishment of a Two-Stage Turbocharging System Model and Analysis on Influence Rules of Key Parameters," Energies, MDPI, vol. 13(8), pages 1-20, April.
    9. Galindo, J. & Fajardo, P. & Navarro, R. & García-Cuevas, L.M., 2013. "Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modeling," Applied Energy, Elsevier, vol. 103(C), pages 116-127.
    10. Sun, Shijun & Wang, Songtao & Chen, Shaowen, 2020. "The influence of diversified forward sweep heights on operating range and performance of an ultra-high-load low-reaction transonic compressor rotor," Energy, Elsevier, vol. 194(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:9:p:3156-3168. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.