IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i12p4980-4988.html
   My bibliography  Save this article

Modelling and validation of a gas engine heat pump working with R410A for cooling applications

Author

Listed:
  • Elgendy, E.
  • Schmidt, J.
  • Khalil, A.
  • Fatouh, M.

Abstract

Gas engine heat pumps play an important role in energy saving and environment protection in both cooling and heating applications. In the present work, a thermal modelling of the gas engine driven heat pump in cooling mode is performed and system main parameters such as cooling capacity, gas engine energy consumption and primary energy ratio (PER) are computed. The modelling of the gas engine heat pump includes modelling of the scroll compressor, the plate evaporator and the gas engine. Discharged refrigerant mass flow rate and compressor power represent the main output parameters of the compressor semi-empirical model. Using the discharged refrigerant mass flow rates along with the available evaporation heat transfer correlations, the system cooling capacity is deduced. Based on the present experimental data, a correlation of gas engine energy consumption as function of compressor power, engine speed and ambient air temperature is obtained. Furthermore, the gas engine heat pump model is validated by comparing experimental and simulation data. The model error percentages to predict the cooling capacity, the gas engine energy consumption and the PER are 7%, 5%, 6% respectively.

Suggested Citation

  • Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Modelling and validation of a gas engine heat pump working with R410A for cooling applications," Applied Energy, Elsevier, vol. 88(12), pages 4980-4988.
    • Handle: RePEc:eee:appene:v:88:y:2011:i:12:p:4980-4988
    DOI: 10.1016/j.apenergy.2011.06.046
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261911004363
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2011.06.046?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhao, Yang & Shigang, Zhang & Haibe, Zhao, 2003. "Optimization study of combined refrigeration cycles driven by an engine," Applied Energy, Elsevier, vol. 76(4), pages 379-389, December.
    2. Sanaye, Sepehr & Chahartaghi, Mahmood, 2010. "Thermal modeling and operating tests for the gas engine-driven heat pump systems," Energy, Elsevier, vol. 35(1), pages 351-363.
    3. Welsby, P. & Devotta, S. & Diggory, P.J., 1988. "Steady- and dynamic-state simulations of heat-pumps. Part I: Literature review," Applied Energy, Elsevier, vol. 31(3), pages 189-203.
    4. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Performance of a gas engine driven heat pump for hot water supply systems," Energy, Elsevier, vol. 36(5), pages 2883-2889.
    5. Chua, K.J. & Chou, S.K. & Yang, W.M., 2010. "Advances in heat pump systems: A review," Applied Energy, Elsevier, vol. 87(12), pages 3611-3624, December.
    6. Elgendy, E. & Schmidt, J., 2010. "Experimental study of gas engine driven air to water heat pump in cooling mode," Energy, Elsevier, vol. 35(6), pages 2461-2467.
    7. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2010. "Performance of a gas engine heat pump (GEHP) using R410A for heating and cooling applications," Energy, Elsevier, vol. 35(12), pages 4941-4948.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bartosz Pawela & Marek Jaszczur, 2022. "Review of Gas Engine Heat Pumps," Energies, MDPI, vol. 15(13), pages 1-16, July.
    2. Sanaye, Sepehr & Chahartaghi, Mahmood & Asgari, Hesam, 2013. "Dynamic modeling of Gas Engine driven Heat Pump system in cooling mode," Energy, Elsevier, vol. 55(C), pages 195-208.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bartosz Pawela & Marek Jaszczur, 2022. "Review of Gas Engine Heat Pumps," Energies, MDPI, vol. 15(13), pages 1-16, July.
    2. Amiri Rad, Ehsan & Maddah, Saeed & Mohammadi, Saeed, 2020. "Designing and optimizing a novel cogeneration system for an office building based on thermo-economic and environmental analyses," Renewable Energy, Elsevier, vol. 151(C), pages 342-354.
    3. Sanaye, Sepehr & Chahartaghi, Mahmood & Asgari, Hesam, 2013. "Dynamic modeling of Gas Engine driven Heat Pump system in cooling mode," Energy, Elsevier, vol. 55(C), pages 195-208.
    4. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2010. "Performance of a gas engine heat pump (GEHP) using R410A for heating and cooling applications," Energy, Elsevier, vol. 35(12), pages 4941-4948.
    5. Gungor, Aysegul & Erbay, Zafer & Hepbasli, Arif, 2011. "Exergoeconomic analyses of a gas engine driven heat pump drier and food drying process," Applied Energy, Elsevier, vol. 88(8), pages 2677-2684, August.
    6. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Performance of a gas engine driven heat pump for hot water supply systems," Energy, Elsevier, vol. 36(5), pages 2883-2889.
    7. Yang, Zhao & Wu, Xi, 2013. "Retrofits and options for the alternatives to HCFC-22," Energy, Elsevier, vol. 59(C), pages 1-21.
    8. Fatouh, M. & Elgendy, E., 2011. "Experimental investigation of a vapor compression heat pump used for cooling and heating applications," Energy, Elsevier, vol. 36(5), pages 2788-2795.
    9. Gungor, Aysegul & Erbay, Zafer & Hepbasli, Arif, 2011. "Exergetic analysis and evaluation of a new application of gas engine heat pumps (GEHPs) for food drying processes," Applied Energy, Elsevier, vol. 88(3), pages 882-891, March.
    10. Fan, Hongming & Shao, Shuangquan & Tian, Changqing, 2014. "Performance investigation on a multi-unit heat pump for simultaneous temperature and humidity control," Applied Energy, Elsevier, vol. 113(C), pages 883-890.
    11. Wang, Jieyue & Cai, Liang & Wang, Yanwei & Ma, Yanbin & Zhang, Xiaosong, 2013. "Modeling and optimization matching on drive system of a coaxial parallel-type hybrid-power gas engine heat pump," Energy, Elsevier, vol. 55(C), pages 1196-1204.
    12. Sun, Fangtian & Fu, Lin & Sun, Jian & Zhang, Shigang, 2014. "A new waste heat district heating system with combined heat and power (CHP) based on ejector heat exchangers and absorption heat pumps," Energy, Elsevier, vol. 69(C), pages 516-524.
    13. Fredrik Skaug Fadnes & Reyhaneh Banihabib & Mohsen Assadi, 2023. "Using Artificial Neural Networks to Gather Intelligence on a Fully Operational Heat Pump System in an Existing Building Cluster," Energies, MDPI, vol. 16(9), pages 1-33, May.
    14. Jie, Ji & Jingyong, Cai & Wenzhu, Huang & Yan, Feng, 2015. "Experimental study on the performance of solar-assisted multi-functional heat pump based on enthalpy difference lab with solar simulator," Renewable Energy, Elsevier, vol. 75(C), pages 381-388.
    15. Sun, Fangtian & Fu, Lin & Sun, Jian & Zhang, Shigang, 2014. "A new ejector heat exchanger based on an ejector heat pump and a water-to-water heat exchanger," Applied Energy, Elsevier, vol. 121(C), pages 245-251.
    16. Nguyen, Hiep V. & Law, Ying Lam E. & Alavy, Masih & Walsh, Philip R. & Leong, Wey H. & Dworkin, Seth B., 2014. "An analysis of the factors affecting hybrid ground-source heat pump installation potential in North America," Applied Energy, Elsevier, vol. 125(C), pages 28-38.
    17. Kayaci, Nurullah, 2020. "Energy and exergy analysis and thermo-economic optimization of the ground source heat pump integrated with radiant wall panel and fan-coil unit with floor heating or radiator," Renewable Energy, Elsevier, vol. 160(C), pages 333-349.
    18. Giovanni Murano & Francesca Caffari & Nicolandrea Calabrese, 2024. "Energy Potential of Existing Reversible Air-to-Air Heat Pumps for Residential Heating," Sustainability, MDPI, vol. 16(14), pages 1-23, July.
    19. Aste, Niccolò & Adhikari, R.S. & Manfren, Massimiliano, 2013. "Cost optimal analysis of heat pump technology adoption in residential reference buildings," Renewable Energy, Elsevier, vol. 60(C), pages 615-624.
    20. Treichel, Calene & Cruickshank, Cynthia A., 2021. "Energy analysis of heat pump water heaters coupled with air-based solar thermal collectors in Canada and the United States," Energy, Elsevier, vol. 221(C).

    More about this item

    Keywords

    Gas engine heat pump; Cooling applications; Modelling; R410A;
    All these keywords.

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:12:p:4980-4988. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.