IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v86y2009i12p2604-2614.html
   My bibliography  Save this article

Numerical simulation of three-dimensional flow dynamics in a hot water storage tank

Author

Listed:
  • Ievers, Simon
  • Lin, Wenxian

Abstract

A hot water storage device is one of the most common household appliances yet it is also one of the biggest sources of energy consumption. With natural resources fading, it is imperative that typical high-energy users such as hot water systems are made as energy efficient as possible. Research has shown that the thermal performance of a hot water system can be increased by maximising the level of thermal stratification within the storage tank, which could lead to huge energy saving. To analyse the effects of tank geometry and operating conditions on the thermal stratification within a storage tank, seven three-dimensional models have been numerically simulated by using the computational fluid dynamics program Fluent with realistic boundary and initial conditions applied. The level of thermal stratification in each model has been quantified using exergy analyses. The results show that increasing the tanks height/diameter aspect ratio, decreasing inlet/outlet flow rates and moving the inlet/outlet to the outer extremities of the tank all result in increasing levels of thermal stratification.

Suggested Citation

  • Ievers, Simon & Lin, Wenxian, 2009. "Numerical simulation of three-dimensional flow dynamics in a hot water storage tank," Applied Energy, Elsevier, vol. 86(12), pages 2604-2614, December.
    • Handle: RePEc:eee:appene:v:86:y:2009:i:12:p:2604-2614
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00141-X
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bouhdjar, A. & Harhad, A., 2002. "Numerical analysis of transient mixed convection flow in storage tank: influence of fluid properties and aspect ratios on stratification," Renewable Energy, Elsevier, vol. 25(4), pages 555-567.
    2. Hegazy, Adel A. & Diab, M. R., 2002. "Performance of an improved design for storage-type domestic electrical water-heaters," Applied Energy, Elsevier, vol. 71(4), pages 287-306, April.
    3. Hegazy, Adel A., 2007. "Effect of inlet design on the performance of storage-type domestic electrical water heaters," Applied Energy, Elsevier, vol. 84(12), pages 1338-1355, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mawire, Ashmore & Taole, Simeon H., 2011. "A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging," Applied Energy, Elsevier, vol. 88(12), pages 4766-4778.
    2. Xun Yang & Yong Wang & Teng Xiong, 2017. "Numerical and Experimental Study on a Solar Water Heating System in Lhasa," Energies, MDPI, vol. 10(7), pages 1-13, July.
    3. Kazmi, H. & D’Oca, S. & Delmastro, C. & Lodeweyckx, S. & Corgnati, S.P., 2016. "Generalizable occupant-driven optimization model for domestic hot water production in NZEB," Applied Energy, Elsevier, vol. 175(C), pages 1-15.
    4. Haoran Ju & Lijun Zheng & Wei Zhong, 2023. "Numerical Research on Thermodynamic Properties of a Thermocline in Thermal Energy Storage Tank Based on Modified One-Dimensional Dimensionless Model," Energies, MDPI, vol. 16(22), pages 1-17, November.
    5. Agnieszka Malec & Tomasz Cholewa & Alicja Siuta-Olcha, 2021. "Influence of Cold Water Inlets and Obstacles on the Energy Efficiency of the Hot Water Production Process in a Hot Water Storage Tank," Energies, MDPI, vol. 14(20), pages 1-26, October.
    6. Chidambaram, L.A. & Ramana, A.S. & Kamaraj, G. & Velraj, R., 2011. "Review of solar cooling methods and thermal storage options," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(6), pages 3220-3228, August.
    7. Jie Huang & Fei Xu & Zilong Wang & Hua Zhang, 2023. "An Experimental Investigation on the Performance of a Water Storage Tank with Sodium Acetate Trihydrate," Energies, MDPI, vol. 16(2), pages 1-14, January.
    8. Omu, Akomeno & Hsieh, Shanshan & Orehounig, Kristina, 2016. "Mixed integer linear programming for the design of solar thermal energy systems with short-term storage," Applied Energy, Elsevier, vol. 180(C), pages 313-326.
    9. Li, Gang, 2016. "Sensible heat thermal storage energy and exergy performance evaluations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 897-923.
    10. Liang, Haobin & Liu, Liu & Zhong, Ziwen & Gan, Yixiang & Wu, Jian-Yong & Niu, Jianlei, 2022. "Towards idealized thermal stratification in a novel phase change emulsion storage tank," Applied Energy, Elsevier, vol. 310(C).
    11. Li, Qiong & Huang, Xiaoqiao & Tai, Yonghang & Gao, Wenfeng & Wenxian, L. & Liu, Wuming, 2021. "Thermal stratification in a solar hot water storage tank with mantle heat exchanger," Renewable Energy, Elsevier, vol. 173(C), pages 1-11.
    12. Pintaldi, Sergio & Perfumo, Cristian & Sethuvenkatraman, Subbu & White, Stephen & Rosengarten, Gary, 2015. "A review of thermal energy storage technologies and control approaches for solar cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 975-995.
    13. Al-Habaibeh, Amin & Shakmak, Bubaker & Fanshawe, Simon, 2018. "Assessment of a novel technology for a stratified hot water energy storage – The water snake," Applied Energy, Elsevier, vol. 222(C), pages 189-198.
    14. Miguel A. Gómez & Sergio Chapela & Joaquín Collazo & José L. Míguez, 2019. "CFD Analysis of a Buffer Tank Redesigned with a Thermosyphon Concentrator Tube," Energies, MDPI, vol. 12(11), pages 1-17, June.
    15. Abd Elfadeel, Shehab M. & Amein, Hamza & El-Bakry, M. Medhat & Hassan, Muhammed A., 2021. "Assessment of a multiple port storage tank in a CPC-driven solar process heat system," Renewable Energy, Elsevier, vol. 180(C), pages 860-873.
    16. Khurana, Hitesh & Majumdar, Rudrodip & Saha, Sandip K., 2022. "Response Surface Methodology-based prediction model for working fluid temperature during stand-alone operation of vertical cylindrical thermal energy storage tank," Renewable Energy, Elsevier, vol. 188(C), pages 619-636.
    17. Baeten, Brecht & Confrey, Thomas & Pecceu, Sébastien & Rogiers, Frederik & Helsen, Lieve, 2016. "A validated model for mixing and buoyancy in stratified hot water storage tanks for use in building energy simulations," Applied Energy, Elsevier, vol. 172(C), pages 217-229.
    18. Bird, Trevor J. & Jain, Neera, 2020. "Dynamic modeling and validation of a micro-combined heat and power system with integrated thermal energy storage," Applied Energy, Elsevier, vol. 271(C).
    19. Untrau, Alix & Sochard, Sabine & Marias, Frédéric & Reneaume, Jean-Michel & Le Roux, Galo A.C. & Serra, Sylvain, 2023. "A fast and accurate 1-dimensional model for dynamic simulation and optimization of a stratified thermal energy storage," Applied Energy, Elsevier, vol. 333(C).
    20. Kocijel, Lino & Mrzljak, Vedran & Glažar, Vladimir, 2020. "Numerical analysis of geometrical and process parameters influence on temperature stratification in a large volumetric heat storage tank," Energy, Elsevier, vol. 194(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ruth M. Saint & Céline Garnier & Francesco Pomponi & John Currie, 2018. "Thermal Performance through Heat Retention in Integrated Collector-Storage Solar Water Heaters: A Review," Energies, MDPI, vol. 11(6), pages 1-26, June.
    2. Mawire, Ashmore, 2013. "Experimental and simulated thermal stratification evaluation of an oil storage tank subjected to heat losses during charging," Applied Energy, Elsevier, vol. 108(C), pages 459-465.
    3. Atikol, U. & Aldabbagh, L.B.Y., 2015. "The impact of two-stage discharging on the exergoeconomic performance of a storage-type domestic water-heater," Energy, Elsevier, vol. 83(C), pages 379-386.
    4. Garnier, Celine & Muneer, Tariq & Currie, John, 2018. "Numerical and empirical evaluation of a novel building integrated collector storage solar water heater," Renewable Energy, Elsevier, vol. 126(C), pages 281-295.
    5. Li, Gang, 2016. "Sensible heat thermal storage energy and exergy performance evaluations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 897-923.
    6. Mawire, Ashmore & Taole, Simeon H., 2011. "A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging," Applied Energy, Elsevier, vol. 88(12), pages 4766-4778.
    7. Wanjiru, Evan M. & Sichilalu, Sam M. & Xia, Xiaohua, 2017. "Model predictive control of heat pump water heater-instantaneous shower powered with integrated renewable-grid energy systems," Applied Energy, Elsevier, vol. 204(C), pages 1333-1346.
    8. Wanjiru, Evan M. & Sichilalu, Sam M. & Xia, Xiaohua, 2017. "Optimal control of heat pump water heater-instantaneous shower using integrated renewable-grid energy systems," Applied Energy, Elsevier, vol. 201(C), pages 332-342.
    9. Kazmi, H. & D’Oca, S. & Delmastro, C. & Lodeweyckx, S. & Corgnati, S.P., 2016. "Generalizable occupant-driven optimization model for domestic hot water production in NZEB," Applied Energy, Elsevier, vol. 175(C), pages 1-15.
    10. Bracamonte, Johane, 2017. "Effect of the transient energy input on thermodynamic performance of passive water-in-glass evacuated tube solar water heaters," Renewable Energy, Elsevier, vol. 105(C), pages 689-701.
    11. Dickinson, Ryan M. & Cruickshank, Cynthia A. & Harrison, Stephen J., 2013. "Charge and discharge strategies for a multi-tank thermal energy storage," Applied Energy, Elsevier, vol. 109(C), pages 366-373.
    12. Bourke, Grant & Bansal, Pradeep & Raine, Robert, 2014. "Performance of gas tankless (instantaneous) water heaters under various international standards," Applied Energy, Elsevier, vol. 131(C), pages 468-478.
    13. Agnieszka Malec & Tomasz Cholewa & Alicja Siuta-Olcha, 2021. "Influence of Cold Water Inlets and Obstacles on the Energy Efficiency of the Hot Water Production Process in a Hot Water Storage Tank," Energies, MDPI, vol. 14(20), pages 1-26, October.
    14. Hegazy, Adel A., 2007. "Effect of inlet design on the performance of storage-type domestic electrical water heaters," Applied Energy, Elsevier, vol. 84(12), pages 1338-1355, December.
    15. Lihua Cao & Jingwen Yu & Xifeng Liu & Zhanzhou Wang, 2024. "Evaluation Method and Analysis on Performance of Diffuser in Heat Storage Tank," Energies, MDPI, vol. 17(3), pages 1-15, January.
    16. Fernández-Seara, José & Uhía, Francisco J. & Pardiñas, Ángel Á. & Bastos, Santiago, 2013. "Experimental analysis of an on demand external domestic hot water production system using four control strategies," Applied Energy, Elsevier, vol. 103(C), pages 85-96.
    17. Yang, Tianrun & Liu, Wen & Kramer, Gert Jan & Sun, Qie, 2021. "Seasonal thermal energy storage: A techno-economic literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    18. Mawire, A. & McPherson, M. & Heetkamp, R.R.J. van den & Mlatho, S.J.P., 2009. "Simulated performance of storage materials for pebble bed thermal energy storage (TES) systems," Applied Energy, Elsevier, vol. 86(7-8), pages 1246-1252, July.
    19. Sezai, I. & Aldabbagh, L.B.Y. & Atikol, U. & Hacisevki, H., 2005. "Performance improvement by using dual heaters in a storage-type domestic electric water-heater," Applied Energy, Elsevier, vol. 81(3), pages 291-305, July.
    20. Azharul Karim & Ashley Burnett & Sabrina Fawzia, 2018. "Investigation of Stratified Thermal Storage Tank Performance for Heating and Cooling Applications," Energies, MDPI, vol. 11(5), pages 1-15, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:86:y:2009:i:12:p:2604-2614. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.