IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v257y2020ics0306261919315843.html
   My bibliography  Save this article

Prediction of fast pyrolysis products yields using lignocellulosic compounds and ash contents

Author

Listed:
  • Trubetskaya, Anna
  • Timko, Michael T
  • Umeki, Kentaro

Abstract

The effects of lignocellulosic biomass composition on product yields and distributions were studied under high-temperature pyrolysis conditions (800–1250 °C) in a drop tube reactor. Several types of biomass were studied along with xylan, cellulose, and two types of lignin as model feeds. Among the model feeds, soot yields obtained from lignin pyrolysis were greater than those obtained from cellulose or xylan. Cellulose pyrolysis produced mostly gaseous products, along with small amounts of tars. Impregnation of lignin with alkali metals greatly reduced tar and soot formation, simultaneously increasing the hydrogen content of the syngas product. An empirical model predicted with reasonable accuracy trends in the product yields obtained from pyrolysis of whole biomass samples using as input data obtained from model feeds composition data and the pyrolysis temperature. Reaction temperature and ash content both have a strong influences on char yield, whereas gas yields were mostly affected by the reaction temperature.

Suggested Citation

  • Trubetskaya, Anna & Timko, Michael T & Umeki, Kentaro, 2020. "Prediction of fast pyrolysis products yields using lignocellulosic compounds and ash contents," Applied Energy, Elsevier, vol. 257(C).
    • Handle: RePEc:eee:appene:v:257:y:2020:i:c:s0306261919315843
    DOI: 10.1016/j.apenergy.2019.113897
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261919315843
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2019.113897?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Johansen, Joakim M. & Gadsbøll, Rasmus & Thomsen, Jesper & Jensen, Peter A. & Glarborg, Peter & Ek, Paul & De Martini, Nikolai & Mancini, Marco & Weber, Roman & Mitchell, Reginald E., 2016. "Devolatilization kinetics of woody biomass at short residence times and high heating rates and peak temperatures," Applied Energy, Elsevier, vol. 162(C), pages 245-256.
    2. Trubetskaya, Anna & Surup, Gerrit & Shapiro, Alexander & Bates, Richard B., 2017. "Modeling the influence of potassium content and heating rate on biomass pyrolysis," Applied Energy, Elsevier, vol. 194(C), pages 199-211.
    3. Trubetskaya, Anna & Brown, Avery & Tompsett, Geoffrey A. & Timko, Michael T. & Kling, Jens & Broström, Markus & Andersen, Mogens Larsen & Umeki, Kentaro, 2018. "Characterization and reactivity of soot from fast pyrolysis of lignocellulosic compounds and monolignols," Applied Energy, Elsevier, vol. 212(C), pages 1489-1500.
    4. Umeki, Kentaro & Yamamoto, Kouichi & Namioka, Tomoaki & Yoshikawa, Kunio, 2010. "High temperature steam-only gasification of woody biomass," Applied Energy, Elsevier, vol. 87(3), pages 791-798, March.
    5. Maity, Sunil K., 2015. "Opportunities, recent trends and challenges of integrated biorefinery: Part II," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1446-1466.
    6. Trubetskaya, Anna & Jensen, Peter Arendt & Jensen, Anker Degn & Garcia Llamas, Angel David & Umeki, Kentaro & Gardini, Diego & Kling, Jens & Bates, Richard B. & Glarborg, Peter, 2016. "Effects of several types of biomass fuels on the yield, nanostructure and reactivity of soot from fast pyrolysis at high temperatures," Applied Energy, Elsevier, vol. 171(C), pages 468-482.
    7. Trubetskaya, Anna & Souihi, Nabil & Umeki, Kentaro, 2019. "Categorization of tars from fast pyrolysis of pure lignocellulosic compounds at high temperature," Renewable Energy, Elsevier, vol. 141(C), pages 751-759.
    8. Maity, Sunil K., 2015. "Opportunities, recent trends and challenges of integrated biorefinery: Part I," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1427-1445.
    9. Andersson, Jim & Lundgren, Joakim, 2014. "Techno-economic analysis of ammonia production via integrated biomass gasification," Applied Energy, Elsevier, vol. 130(C), pages 484-490.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Tao & Sjöblom, Jonas & Ström, Henrik, 2022. "Numerical investigations of soot generation during wood-log combustion," Applied Energy, Elsevier, vol. 325(C).
    2. Costa, Juliana E.B. & Barbosa, Andrey S. & Melo, Marcus A.F. & Melo, Dulce M.A. & Medeiros, Rodolfo L.B.A. & Braga, Renata M., 2022. "Renewable aromatics through catalytic pyrolysis of coconut fiber (Cocos nucífera Linn.) using low cost HZSM-5," Renewable Energy, Elsevier, vol. 191(C), pages 439-446.
    3. Zhang, Huiyan & Zhu, Yiwen & Liu, Qingyu & Li, Xiaowen, 2022. "Preparation of porous carbon materials from biomass pyrolysis vapors for hydrogen storage," Applied Energy, Elsevier, vol. 306(PB).
    4. He, Qing & Guo, Qinghua & Umeki, Kentaro & Ding, Lu & Wang, Fuchen & Yu, Guangsuo, 2021. "Soot formation during biomass gasification: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    5. Kim, Hoyong & Sriram, Subash & Fang, Tiegang & Kelley, Stephen & Park, Sunkyu, 2021. "An eco-friendly approach for blending of fast-pyrolysis bio-oil in petroleum-derived fuel by controlling ash content of loblolly pine," Renewable Energy, Elsevier, vol. 179(C), pages 2063-2070.
    6. Wu, Kai & Yang, Ke & Zhu, Yiwen & Luo, Bingbing & Chu, Chenyang & Li, Mingfan & Zhang, Yuanjian & Zhang, Huiyan, 2023. "The co-pyrolysis interactionsof isolated lignins and cellulose by experiments and theoretical calculations," Energy, Elsevier, vol. 263(PC).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Si, Mengting & Liu, Jiani & Zhang, Yindi & Liu, Bing & Luo, Zixue & Cheng, Qiang, 2024. "Effect of co-combustion of coal with biomass on the morphology of soot," Renewable Energy, Elsevier, vol. 226(C).
    2. Nawaz, Ahmad & Razzak, Shaikh Abdur, 2024. "Co-pyrolysis of biomass and different plastic waste to reduce hazardous waste and subsequent production of energy products: A review on advancement, synergies, and future prospects," Renewable Energy, Elsevier, vol. 224(C).
    3. López-González, D. & Puig-Gamero, M. & Acién, F.G. & García-Cuadra, F. & Valverde, J.L. & Sanchez-Silva, L., 2015. "Energetic, economic and environmental assessment of the pyrolysis and combustion of microalgae and their oils," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1752-1770.
    4. Carvalho, Ana Karine F. & Bento, Heitor B.S. & Izário Filho, Hélcio J. & de Castro, Heizir F., 2018. "Approaches to convert Mucor circinelloides lipid into biodiesel by enzymatic synthesis assisted by microwave irradiations," Renewable Energy, Elsevier, vol. 125(C), pages 747-754.
    5. Perkins, Greg & Bhaskar, Thallada & Konarova, Muxina, 2018. "Process development status of fast pyrolysis technologies for the manufacture of renewable transport fuels from biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 292-315.
    6. He, Qing & Guo, Qinghua & Umeki, Kentaro & Ding, Lu & Wang, Fuchen & Yu, Guangsuo, 2021. "Soot formation during biomass gasification: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    7. Li, Tian & Niu, Yanqing & Wang, Liang & Shaddix, Christopher & Løvås, Terese, 2018. "High temperature gasification of high heating-rate chars using a flat-flame reactor," Applied Energy, Elsevier, vol. 227(C), pages 100-107.
    8. Awasthi, Mukesh Kumar & Sindhu, Raveendran & Sirohi, Ranjna & Kumar, Vinod & Ahluwalia, Vivek & Binod, Parameswaran & Juneja, Ankita & Kumar, Deepak & Yan, Binghua & Sarsaiya, Surendra & Zhang, Zengqi, 2022. "Agricultural waste biorefinery development towards circular bioeconomy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    9. Wiinikka, Henrik & Wennebro, Jonas & Gullberg, Marcus & Pettersson, Esbjörn & Weiland, Fredrik, 2017. "Pure oxygen fixed-bed gasification of wood under high temperature (>1000°C) freeboard conditions," Applied Energy, Elsevier, vol. 191(C), pages 153-162.
    10. Wu, Shaohua & Zhou, Dezhi & Yang, Wenming, 2019. "Implementation of an efficient method of moments for treatment of soot formation and oxidation processes in three-dimensional engine simulations," Applied Energy, Elsevier, vol. 254(C).
    11. Trubetskaya, Anna & Souihi, Nabil & Umeki, Kentaro, 2019. "Categorization of tars from fast pyrolysis of pure lignocellulosic compounds at high temperature," Renewable Energy, Elsevier, vol. 141(C), pages 751-759.
    12. Kalil Rahiman, M. & Santhoshkumar, S. & Subramaniam, D. & Avinash, A. & Pugazhendhi, Arivalagan, 2022. "Effects of oxygenated fuel pertaining to fuel analysis on diesel engine combustion and emission characteristics," Energy, Elsevier, vol. 239(PD).
    13. Chen, Tao & Sjöblom, Jonas & Ström, Henrik, 2022. "Numerical investigations of soot generation during wood-log combustion," Applied Energy, Elsevier, vol. 325(C).
    14. Sunčica Beluhan & Katarina Mihajlovski & Božidar Šantek & Mirela Ivančić Šantek, 2023. "The Production of Bioethanol from Lignocellulosic Biomass: Pretreatment Methods, Fermentation, and Downstream Processing," Energies, MDPI, vol. 16(19), pages 1-38, October.
    15. Lee, Jechan & Choi, Dongho & Kwon, Eilhann E. & Ok, Yong Sik, 2017. "Functional modification of hydrothermal liquefaction products of microalgal biomass using CO2," Energy, Elsevier, vol. 137(C), pages 412-418.
    16. Van Meerbeek, Koenraad & Muys, Bart & Hermy, Martin, 2019. "Lignocellulosic biomass for bioenergy beyond intensive cropland and forests," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 139-149.
    17. Ren, Qiangqiang & Zhao, Changsui, 2015. "Evolution of fuel-N in gas phase during biomass pyrolysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 408-418.
    18. Cui, Tongmin & Fan, Wenke & Dai, Zhenghua & Guo, Qinghua & Yu, Guangsuo & Wang, Fuchen, 2016. "Variation of the coal chemical structure and determination of the char molecular size at the early stage of rapid pyrolysis," Applied Energy, Elsevier, vol. 179(C), pages 650-659.
    19. Walter Stefanoni & Francesco Latterini & Javier Prieto Ruiz & Simone Bergonzoli & Consuelo Attolico & Luigi Pari, 2020. "Mechanical Harvesting of Camelina: Work Productivity, Costs and Seed Loss Evaluation," Energies, MDPI, vol. 13(20), pages 1-14, October.
    20. Tang, Xing & Wei, Junnan & Ding, Ning & Sun, Yong & Zeng, Xianhai & Hu, Lei & Liu, Shijie & Lei, Tingzhou & Lin, Lu, 2017. "Chemoselective hydrogenation of biomass derived 5-hydroxymethylfurfural to diols: Key intermediates for sustainable chemicals, materials and fuels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 287-296.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:257:y:2020:i:c:s0306261919315843. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.