IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v208y2017icp592-606.html
   My bibliography  Save this article

Multi-objective optimization for advanced superheater steam temperature control in a 300MW power plant

Author

Listed:
  • Sun, Li
  • Hua, Qingsong
  • Shen, Jiong
  • Xue, Yali
  • Li, Donghai
  • Lee, Kwang Y.

Abstract

Control of superheater steam temperature (SST) is critical for the safety and efficiency of the coal-fired power plant. However, the conventional cascaded PI controller is faced with great challenges in regulating the SST within a satisfactory range in the environment of extensive load changes, which is inevitably becoming even worse due to the growing integration of the intermittent renewables. To this end, this paper introduces advanced control and multi-objective optimization (MOO) to improve the SST control performance and thus to enable the load being quickly adjusted in a wider range. The inner-loop PI controller parameters are optimized based on the tracking and regulation performance objectives subject to a robustness constraint. The improvement of the outer-loop controller involves two steps, (i) the outer-loop PI controller is upgraded to active disturbance rejection controller (ADRC) in order to eliminate the sluggish response to the external load disturbances; (ii) a mathematical algorithm is developed to depict the stable region for the ADRC parameters, serving as the MOO search space. Comparative simulations show the advantage of the proposed strategy, which is confirmed by a field test in an in-service 300MW power plant. It shows that the proposed strategy leads to a much smaller temperature deviation in both constant-load and load-varying conditions than the conventional control, making it less sensitive to the external disturbances. Furthermore, the load demand can be shifted more flexibly in a wide range (from 10MW to 15MW) while the SST is strictly confined within the allowable range, indicating a promising prospect of the proposed strategy in a power grid with high renewables penetration.

Suggested Citation

  • Sun, Li & Hua, Qingsong & Shen, Jiong & Xue, Yali & Li, Donghai & Lee, Kwang Y., 2017. "Multi-objective optimization for advanced superheater steam temperature control in a 300MW power plant," Applied Energy, Elsevier, vol. 208(C), pages 592-606.
  • Handle: RePEc:eee:appene:v:208:y:2017:i:c:p:592-606
    DOI: 10.1016/j.apenergy.2017.09.095
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261917313788
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2017.09.095?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fang, Fang & Wei, Le, 2011. "Backstepping-based nonlinear adaptive control for coal-fired utility boiler-turbine units," Applied Energy, Elsevier, vol. 88(3), pages 814-824, March.
    2. Li, Xiwang & Wen, Jin & Malkawi, Ali, 2016. "An operation optimization and decision framework for a building cluster with distributed energy systems," Applied Energy, Elsevier, vol. 178(C), pages 98-109.
    3. Xiao Wu & Jiong Shen & Yiguo Li & Kwang Y. Lee, 2015. "Steam power plant configuration, design, and control," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 4(6), pages 537-563, November.
    4. Mertens, Nicolas & Alobaid, Falah & Starkloff, Ralf & Epple, Bernd & Kim, Hyun-Gee, 2015. "Comparative investigation of drum-type and once-through heat recovery steam generator during start-up," Applied Energy, Elsevier, vol. 144(C), pages 250-260.
    5. Alobaid, Falah & Ströhle, Jochen & Epple, Bernd & Kim, Hyun-Gee, 2009. "Dynamic simulation of a supercritical once-through heat recovery steam generator during load changes and start-up procedures," Applied Energy, Elsevier, vol. 86(7-8), pages 1274-1282, July.
    6. Khorasaninejad, Ehsan & Hajabdollahi, Hassan, 2014. "Thermo-economic and environmental optimization of solar assisted heat pump by using multi-objective particle swam algorithm," Energy, Elsevier, vol. 72(C), pages 680-690.
    7. Benato, A. & Bracco, S. & Stoppato, A. & Mirandola, A., 2016. "LTE: A procedure to predict power plants dynamic behaviour and components lifetime reduction during transient operation," Applied Energy, Elsevier, vol. 162(C), pages 880-891.
    8. Delgarm, N. & Sajadi, B. & Kowsary, F. & Delgarm, S., 2016. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)," Applied Energy, Elsevier, vol. 170(C), pages 293-303.
    9. Liu, Ji-Zhen & Yan, Shu & Zeng, De-Liang & Hu, Yong & Lv, You, 2015. "A dynamic model used for controller design of a coal fired once-through boiler-turbine unit," Energy, Elsevier, vol. 93(P2), pages 2069-2078.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lefeng Cheng & Pan Peng & Wentian Lu & Pengrong Huang & Yang Chen, 2024. "Study of Flexibility Transformation in Thermal Power Enterprises under Multi-Factor Drivers: Application of Complex-Network Evolutionary Game Theory," Mathematics, MDPI, vol. 12(16), pages 1-23, August.
    2. Zhao, Xu & Chen, Yongan & Chen, Luowen & Chen, Ning & Wang, Hao & Huang, Wei & Chen, Jiayao, 2023. "On full-life-cycle SOC estimation for lithium batteries by a variable structure based fractional-order extended state observer," Applied Energy, Elsevier, vol. 351(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Neshumayev, Dmitri & Rummel, Leo & Konist, Alar & Ots, Arvo & Parve, Teet, 2018. "Power plant fuel consumption rate during load cycling," Applied Energy, Elsevier, vol. 224(C), pages 124-135.
    2. Wu, Zhenlong & Li, Donghai & Xue, Yali & Chen, YangQuan, 2019. "Gain scheduling design based on active disturbance rejection control for thermal power plant under full operating conditions," Energy, Elsevier, vol. 185(C), pages 744-762.
    3. Hübel, Moritz & Meinke, Sebastian & Andrén, Marcus T. & Wedding, Christoffer & Nocke, Jürgen & Gierow, Conrad & Hassel, Egon & Funkquist, Jonas, 2017. "Modelling and simulation of a coal-fired power plant for start-up optimisation," Applied Energy, Elsevier, vol. 208(C), pages 319-331.
    4. Zhao, Yongliang & Wang, Chaoyang & Liu, Ming & Chong, Daotong & Yan, Junjie, 2018. "Improving operational flexibility by regulating extraction steam of high-pressure heaters on a 660 MW supercritical coal-fired power plant: A dynamic simulation," Applied Energy, Elsevier, vol. 212(C), pages 1295-1309.
    5. Ding, Yan & Wang, Qiaochu & Kong, Xiangfei & Yang, Kun, 2019. "Multi-objective optimisation approach for campus energy plant operation based on building heating load scenarios," Applied Energy, Elsevier, vol. 250(C), pages 1600-1617.
    6. Yong-Sheng Hao & Zhuo Chen & Li Sun & Junyu Liang & Hongxia Zhu, 2020. "Multi-Objective Intelligent Optimization of Superheated Steam Temperature Control Based on Cascaded Disturbance Observer," Sustainability, MDPI, vol. 12(19), pages 1-24, October.
    7. Romero-Anton, N. & Martin-Escudero, K. & Portillo-Valdés, L.A. & Gómez-Elvira, I. & Salazar-Herran, E., 2018. "Improvement of auxiliary BI-DRUM boiler operation by dynamic simulation," Energy, Elsevier, vol. 148(C), pages 676-686.
    8. Ghabraei, Soheil & Moradi, Hamed & Vossoughi, Gholamreza, 2018. "Design & application of adaptive variable structure &H∞ robust optimal schemes in nonlinear control of boiler-turbine unit in the presence of various uncertainties," Energy, Elsevier, vol. 142(C), pages 1040-1056.
    9. Chen Chen & Lei Pan & Shanjian Liu & Li Sun & Kwang Y. Lee, 2018. "A Sustainable Power Plant Control Strategy Based on Fuzzy Extended State Observer and Predictive Control," Sustainability, MDPI, vol. 10(12), pages 1-21, December.
    10. Wu, Xiao & Wang, Meihong & Shen, Jiong & Li, Yiguo & Lawal, Adekola & Lee, Kwang Y., 2019. "Reinforced coordinated control of coal-fired power plant retrofitted with solvent based CO2 capture using model predictive controls," Applied Energy, Elsevier, vol. 238(C), pages 495-515.
    11. Al-Momani, Ahmad & Mohamed, Omar & Abu Elhaija, Wejdan, 2022. "Multiple processes modeling and identification for a cleaner supercritical power plant via Grey Wolf Optimizer," Energy, Elsevier, vol. 252(C).
    12. Omar Mohamed & Ashraf Khalil & Jihong Wang, 2020. "Modeling and Control of Supercritical and Ultra-Supercritical Power Plants: A Review," Energies, MDPI, vol. 13(11), pages 1-23, June.
    13. Wang, Di & Zhou, Yunlong & Li, Xiaoli, 2018. "A dynamic model used for controller design for fast cut back of coal-fired boiler-turbine plant," Energy, Elsevier, vol. 144(C), pages 526-534.
    14. Huang, Congzhi & Sheng, Xinxin, 2020. "Data-driven model identification of boiler-turbine coupled process in 1000 MW ultra-supercritical unit by improved bird swarm algorithm," Energy, Elsevier, vol. 205(C).
    15. Rossi, Iacopo & Sorce, Alessandro & Traverso, Alberto, 2017. "Gas turbine combined cycle start-up and stress evaluation: A simplified dynamic approach," Applied Energy, Elsevier, vol. 190(C), pages 880-890.
    16. Hao Zhang & Xiangjie Liu & Xiaobing Kong & Kwang Y. Lee, 2019. "Stacked Auto-Encoder Modeling of an Ultra-Supercritical Boiler-Turbine System," Energies, MDPI, vol. 12(21), pages 1-14, October.
    17. Farahani, Yaser & Jafarian, Ali & Mahdavi Keshavar, Omid, 2022. "Dynamic simulation of a hybrid once-through and natural circulation Heat Recovery Steam Generator (HRSG)," Energy, Elsevier, vol. 242(C).
    18. Wang, Chaoyang & Liu, Ming & Li, Bingxin & Liu, Yiwen & Yan, Junjie, 2017. "Thermodynamic analysis on the transient cycling of coal-fired power plants: Simulation study of a 660 MW supercritical unit," Energy, Elsevier, vol. 122(C), pages 505-527.
    19. González-Gómez, P.A. & Gómez-Hernández, J. & Briongos, J.V. & Santana, D., 2018. "Transient thermo-mechanical analysis of steam generators for solar tower plants," Applied Energy, Elsevier, vol. 212(C), pages 1051-1068.
    20. Taler, Dawid & Dzierwa, Piotr & Kaczmarski, Karol & Taler, Jan, 2021. "Optimisation of heating and cooling of pressure thick-walled components operating in the saturated steam area," Energy, Elsevier, vol. 231(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:208:y:2017:i:c:p:592-606. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.