IDEAS home Printed from https://ideas.repec.org/a/bla/inecol/v26y2022i3p704-717.html
   My bibliography  Save this article

A mechanistic model to link technical specifications of vehicle end‐of‐life treatment with the potential of closed‐loop recycling of post‐consumer scrap alloys

Author

Listed:
  • Qingshi Tu
  • Edgar G. Hertwich

Abstract

Closed‐loop recycling of scrap from end‐of‐life (EoL) vehicles could reduce the demand for virgin material production and associated greenhouse gas (GHG) emissions. However, current modeling frameworks for closed‐loop recycling lack a mechanistic representation of the linkage between the changes in scrap quality (i.e., alloying element composition) and the EoL treatment practices, demonstrating a challenge to comprehensively assess the merits of closed‐loop recycling. The Vehicle Recycling LCA model (VehiReLCA) was developed to address this challenge by parameterizing the key factors involved in the EoL treatment steps, quantifying their influences on the alloying composition of resulting scrap ingots and ultimately, the associated closed‐loop utilization ratios and life cycle GHG emissions. A series of scenarios were investigated, representing a wide range of results that originated from different assumptions of scrap mixing, sorting efficiency, and remelting for six vehicle archetypes. Based on the prevailing assumption of constant closed‐loop utilization ratios in the literature, the life cycle GHG emissions for conventional (lightweight) internal combustion engine vehicle, plug‐in electric vehicle and battery electric vehicle were 3788 (4598), 4136 (4799), and 3327 (4166) kg CO2‐eq per vehicle, respectively. In comparison, explicitly correlating the alloy compositions with random sorting error and/or cross‐mixing of vehicle components often led to an order of magnitude decrease in scrap utilization ratios. Accordingly, the increase in GHG emissions, compared to those estimated using constant utilization ratios, varied from 15%–47% (for all archetypes when 2% random sorting error was considered) to 64%–71% (for lightweight archetypes when the most heterogeneity of EoL treatment steps was assumed). This revealed a significant range of uncertainty regarding the GHG reduction benefits of closed‐loop recycling that was not previously identified in the literature.

Suggested Citation

  • Qingshi Tu & Edgar G. Hertwich, 2022. "A mechanistic model to link technical specifications of vehicle end‐of‐life treatment with the potential of closed‐loop recycling of post‐consumer scrap alloys," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 704-717, June.
  • Handle: RePEc:bla:inecol:v:26:y:2022:i:3:p:704-717
    DOI: 10.1111/jiec.13223
    as

    Download full text from publisher

    File URL: https://doi.org/10.1111/jiec.13223
    Download Restriction: no

    File URL: https://libkey.io/10.1111/jiec.13223?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Trevor Zink & Roland Geyer & Richard Startz, 2018. "Toward Estimating Displaced Primary Production from Recycling: A Case Study of U.S. Aluminum," Journal of Industrial Ecology, Yale University, vol. 22(2), pages 314-326, April.
    2. Stefan Pauliuk & Niko Heeren, 2020. "ODYM—An open software framework for studying dynamic material systems: Principles, implementation, and data structures," Journal of Industrial Ecology, Yale University, vol. 24(3), pages 446-458, June.
    3. Ohno, Hajime & Matsubae, Kazuyo & Nakajima, Kenichi & Kondo, Yasushi & Nakamura, Shinichiro & Nagasaka, Tetsuya, 2015. "Toward the efficient recycling of alloying elements from end of life vehicle steel scrap," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 11-20.
    4. Sanfélix, Javier & Messagie, Maarten & Omar, Noshin & Van Mierlo, Joeri & Hennige, Volker, 2015. "Environmental performance of advanced hybrid energy storage systems for electric vehicle applications," Applied Energy, Elsevier, vol. 137(C), pages 925-930.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jan Streeck & Quirin Dammerer & Dominik Wiedenhofer & Fridolin Krausmann, 2021. "The role of socio‐economic material stocks for natural resource use in the United States of America from 1870 to 2100," Journal of Industrial Ecology, Yale University, vol. 25(6), pages 1486-1502, December.
    2. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    3. Karan Bhuwalka & Randolph E. Kirchain & Elsa A. Olivetti & Richard Roth, 2023. "Quantifying the drivers of long‐term prices in materials supply chains," Journal of Industrial Ecology, Yale University, vol. 27(1), pages 141-154, February.
    4. Marmiroli, Benedetta & Venditti, Mattia & Dotelli, Giovanni & Spessa, Ezio, 2020. "The transport of goods in the urban environment: A comparative life cycle assessment of electric, compressed natural gas and diesel light-duty vehicles," Applied Energy, Elsevier, vol. 260(C).
    5. Edgar Battand Towa Kouokam & Vanessa Zeller & Wouter Achten, 2019. "Input-output models and waste management analysis: A critical review," ULB Institutional Repository 2013/359535, ULB -- Universite Libre de Bruxelles.
    6. Zhaoshuai Pan & Zhaozhi Zhang & Dong Che, 2023. "Exploring Primary Aluminum Consumption: New Perspectives from Hybrid CEEMDAN-S-Curve Model," Sustainability, MDPI, vol. 15(5), pages 1-21, February.
    7. John Ryter & Xinkai Fu & Karan Bhuwalka & Richard Roth & Elsa Olivetti, 2022. "Assessing recycling, displacement, and environmental impacts using an economics‐informed material system model," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 1010-1024, June.
    8. Sarah Schmidt & David Laner, 2023. "The environmental performance of plastic packaging waste management in Germany: Current and future key factors," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1447-1460, December.
    9. Crossin, Enda & Doherty, Peter J.B., 2016. "The effect of charging time on the comparative environmental performance of different vehicle types," Applied Energy, Elsevier, vol. 179(C), pages 716-726.
    10. Yongtao Liu & Chunmei Zhang & Zhuo Hao & Xu Cai & Chuanpan Liu & Jianzhang Zhang & Shu Wang & Yisong Chen, 2023. "Study on the Life Cycle Assessment of Automotive Power Batteries Considering Multi-Cycle Utilization," Energies, MDPI, vol. 16(19), pages 1-24, September.
    11. Requia, Weeberb J. & Adams, Matthew D. & Arain, Altaf & Koutrakis, Petros & Ferguson, Mark, 2017. "Carbon dioxide emissions of plug-in hybrid electric vehicles: A life-cycle analysis in eight Canadian cities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 1390-1396.
    12. Berzi, Lorenzo & Delogu, Massimo & Pierini, Marco & Romoli, Filippo, 2016. "Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 140-155.
    13. Julien Pedneault & Guillaume Majeau‐Bettez & Stefan Pauliuk & Manuele Margni, 2022. "Sector‐specific scenarios for future stocks and flows of aluminum: An analysis based on shared socioeconomic pathways," Journal of Industrial Ecology, Yale University, vol. 26(5), pages 1728-1746, October.
    14. Wang, Ping & Wang, Jinman & Qin, Qian & Wang, Hongdan, 2017. "Life cycle assessment of magnetized fly-ash compound fertilizer production: A case study in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 706-713.
    15. Divya Tiwari & Jill Miscandlon & Ashutosh Tiwari & Geraint W. Jewell, 2021. "A Review of Circular Economy Research for Electric Motors and the Role of Industry 4.0 Technologies," Sustainability, MDPI, vol. 13(17), pages 1-19, August.
    16. Hao, Han & Qiao, Qinyu & Liu, Zongwei & Zhao, Fuquan, 2017. "Impact of recycling on energy consumption and greenhouse gas emissions from electric vehicle production: The China 2025 case," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 114-125.
    17. Chunbo Zhang & Xiang Zhao & Romain Sacchi & Fengqi You, 2023. "Trade-off between critical metal requirement and transportation decarbonization in automotive electrification," Nature Communications, Nature, vol. 14(1), pages 1-16, December.
    18. Veneri, Ottorino & Capasso, Clemente & Patalano, Stanislao, 2017. "Experimental study on the performance of a ZEBRA battery based propulsion system for urban commercial vehicles," Applied Energy, Elsevier, vol. 185(P2), pages 2005-2018.
    19. Javier Sanfélix & Cristina De la Rúa & Jannick Hoejrup Schmidt & Maarten Messagie & Joeri Van Mierlo, 2016. "Environmental and Economic Performance of an Li-Ion Battery Pack: A Multiregional Input-Output Approach," Energies, MDPI, vol. 9(8), pages 1-15, July.
    20. Christine Roxanne Hung & Paul Kishimoto & Volker Krey & Anders Hammer Strømman & Guillaume Majeau‐Bettez, 2022. "ECOPT2: An adaptable life cycle assessment model for the environmentally constrained optimization of prospective technology transitions," Journal of Industrial Ecology, Yale University, vol. 26(5), pages 1616-1630, October.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:bla:inecol:v:26:y:2022:i:3:p:704-717. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: http://www.blackwellpublishing.com/journal.asp?ref=1088-1980 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.