IDEAS home Printed from https://ideas.repec.org/a/wly/apsmbi/v31y2015i3p380-393.html
   My bibliography  Save this article

Reliability of demand‐based warm standby systems subject to fault level coverage

Author

Listed:
  • Q. Zhai
  • R. Peng
  • L. Xing
  • J. Yang

Abstract

For mission‐critical or safety‐critical systems, redundancy techniques are often applied to satisfy the stringent reliability requirements of the system design. Warm standby sparing is a common redundancy technique, which compromises the high energy consumption of hot standby techniques and the long recovery time of cold standby techniques. This paper considers a more general model for warm standby systems, that is, the demand‐based warm standby system, where each component bears a nominal capacity and the system fails if the total capacity of the working components cannot meet the system demand. Moreover, fault level coverage is considered to model the imperfect coverage effect in the standby system. A multivalued decision diagram based approach is proposed to evaluate the reliability of the demand‐based warm standby system subject to the fault level coverage. Examples are given to illustrate the proposed method. Copyright © 2014 John Wiley & Sons, Ltd.

Suggested Citation

  • Q. Zhai & R. Peng & L. Xing & J. Yang, 2015. "Reliability of demand‐based warm standby systems subject to fault level coverage," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 31(3), pages 380-393, May.
    • Handle: RePEc:wly:apsmbi:v:31:y:2015:i:3:p:380-393
    DOI: 10.1002/asmb.2010
    as

    Download full text from publisher

    File URL: https://doi.org/10.1002/asmb.2010
    Download Restriction: no
    File URL: https://libkey.io/10.1002/asmb.2010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Juan Eloy Ruiz-Castro, 2021. "Optimizing a Multi-State Cold-Standby System with Multiple Vacations in the Repair and Loss of Units," Mathematics, MDPI, vol. 9(8), pages 1-29, April.
    2. Gregory Levitin & Heping Jia & Yi Ding & Yonghua Song, 2017. "1-out-of-N multi-state standby systems with state-dependent random replacement times," Journal of Risk and Reliability, , vol. 231(6), pages 750-760, December.
    3. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2024. "Allocation and activation of resource constrained shock-exposed components in heterogeneous 1-out-of-n standby system," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    4. Jia, Heping & Liu, Dunnan & Li, Yanbin & Ding, Yi & Liu, Mingguang & Peng, Rui, 2020. "Reliability evaluation of power systems with multi-state warm standby and multi-state performance sharing mechanism," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    5. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2023. "Standby mode transfer schedule minimizing downtime of 1-out-of-N system with storage," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    6. Delia Montoro-Cazorla & Rafael Pérez-Ocón, 2022. "Optimizing Costs in a Reliability System under Markovian Arrival of Failures and Reposition by K -Policy Inspection," Mathematics, MDPI, vol. 10(11), pages 1-21, June.
    7. Tian, Tianzi & Yang, Jun & Li, Lei & Wang, Ning, 2023. "Reliability assessment of performance-based balanced systems with rebalancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    8. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2023. "Predetermined standby mode transfers in 1-out-of-N systems with resource-constrained elements," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    9. Jia, Heping & Peng, Rui & Yang, Li & Wu, Tianyi & Liu, Dunnan & Li, Yanbin, 2022. "Reliability evaluation of demand-based warm standby systems with capacity storage," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    10. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2022. "Optimal sequencing of elements activation in 1-out-of-n warm standby system with storage," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    11. Wang, Guanjun & Peng, Rui & Xing, Liudong, 2018. "Reliability evaluation of unrepairable k-out-of-n: G systems with phased-mission requirements based on record values," Reliability Engineering and System Safety, Elsevier, vol. 178(C), pages 191-197.
    12. Jia, Heping & Ding, Yi & Peng, Rui & Liu, Hanlin & Song, Yonghua, 2020. "Reliability assessment and activation sequence optimization of non-repairable multi-state generation systems considering warm standby," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    13. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2023. "Co-optimizing component allocation and activation sequence in heterogeneous 1-out-of-n standby system exposed to shocks," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    14. Min Gong & Hanlin Liu & Rui Peng, 2020. "Redundancy allocation of mixed warm and cold standby components in repairable K-out-of-N systems," Journal of Risk and Reliability, , vol. 234(5), pages 696-707, October.
    15. Heping Jia & Rui Peng & Yi Ding & Yonghua Song, 2019. "Reliability of demand-based warm standby system with common bus performance sharing," Journal of Risk and Reliability, , vol. 233(4), pages 580-592, August.
    16. Zhou, Siwei & Ye, Luyao & Xiong, Shengwu & Xiang, Jianwen, 2022. "Reliability analysis of dynamic fault trees with Priority-AND gates based on irrelevance coverage model," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    17. Levitin, Gregory & Xing, Liudong & Ben-Haim, Hanoch & Huang, Hong-Zong, 2019. "Dynamic demand satisfaction probability of consecutive sliding window systems with warm standby components," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 397-405.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:apsmbi:v:31:y:2015:i:3:p:380-393. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)1526-4025 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.