IDEAS home Printed from https://ideas.repec.org/a/spr/endesu/v24y2022i9d10.1007_s10668-021-01888-x.html
   My bibliography  Save this article

To optimize the flow distribution in concentric glass tube solar air collector with various configuration of manifolds

Author

Listed:
  • Vishal Dabra

    (National Institute of Technology
    Panipat Institute of Engineering & Technology)

  • Avadhesh Yadav

    (National Institute of Technology)

Abstract

As per the objective of the present experimental investigation, influence of various configurations of manifolds for optimum flow distribution in concentric glass tube solar air collector (CGTSAC) has been analyzed for transient conditions. Based on the previous studies it was found that the performance of solar air collector is robustly dependent on the flow distribution and decreases with non-uniform flow distribution. For evaluating four different flow distribution arrangements, the experimental setup of CGTSAC is installed at N.I.T., Kurukshetra (29°58′ (latitude) North and 76°53′ (longitude) East), India, and tested with various configurations of manifolds at different operating conditions. The experimental data have been recorded and found that the maximum exit air temperature is 53.1 and 52.9 °C, and the average values of COPt are 0.2731 and 0.2943 at air mass flow rate of 26.6 and 34.2 kg/h respectively with series flow arrangement. Also, the circular fin is introduced in CGTSAC to enhance the performance of the series flow arrangement by increasing the heat transfer.

Suggested Citation

  • Vishal Dabra & Avadhesh Yadav, 2022. "To optimize the flow distribution in concentric glass tube solar air collector with various configuration of manifolds," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(9), pages 10902-10923, September.
    • Handle: RePEc:spr:endesu:v:24:y:2022:i:9:d:10.1007_s10668-021-01888-x
    DOI: 10.1007/s10668-021-01888-x
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10668-021-01888-x
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10668-021-01888-x?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bellos, Evangelos & Tzivanidis, Christos, 2018. "Investigation of a star flow insert in a parabolic trough solar collector," Applied Energy, Elsevier, vol. 224(C), pages 86-102.
    2. Badescu, Viorel & Abed, Qahtan A. & Ciocanea, Adrian & Soriga, Iuliana, 2017. "The stability of the radiative regime does influence the daily performance of solar air heaters," Renewable Energy, Elsevier, vol. 107(C), pages 403-416.
    3. Wei, Min & Fan, Yilin & Luo, Lingai & Flamant, Gilles, 2017. "Design and optimization of baffled fluid distributor for realizing target flow distribution in a tubular solar receiver," Energy, Elsevier, vol. 136(C), pages 126-134.
    4. Mao, Chunliu & Li, Muran & Li, Na & Shan, Ming & Yang, Xudong, 2019. "Mathematical model development and optimal design of the horizontal all-glass evacuated tube solar collectors integrated with bottom mirror reflectors for solar energy harvesting," Applied Energy, Elsevier, vol. 238(C), pages 54-68.
    5. Erdenedavaa, Purevdalai & Akisawa, Atsushi & Adiyabat, Amarbayar & Otgonjanchiv, Erdenesuvd, 2019. "Observation and modeling of dust deposition on glass tube of evacuated solar thermal collectors in Mongolia," Renewable Energy, Elsevier, vol. 130(C), pages 613-621.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fathabadi, Hassan, 2020. "Novel solar collector: Evaluating the impact of nanoparticles added to the collector’s working fluid, heat transfer fluid temperature and flow rate," Renewable Energy, Elsevier, vol. 148(C), pages 1165-1173.
    2. Varun, K. & Arunachala, U.C. & Elton, D.N., 2020. "Trade-off between wire matrix and twisted tape: SOLTRACE® based indoor study of parabolic trough collector," Renewable Energy, Elsevier, vol. 156(C), pages 478-492.
    3. Zaharil, H.A. & Hasanuzzaman, M., 2020. "Modelling and performance analysis of parabolic trough solar concentrator for different heat transfer fluids under Malaysian condition," Renewable Energy, Elsevier, vol. 149(C), pages 22-41.
    4. Yang, Huayu & Zhang, Yuhao & Gao, Wenhua & Yan, Bowen & Zhao, Jianxin & Zhang, Hao & Chen, Wei & Fan, Daming, 2021. "Steam replacement strategy using microwave resonance: A future system for continuous-flow heating applications," Applied Energy, Elsevier, vol. 283(C).
    5. Evangelisti, Luca & De Lieto Vollaro, Roberto & Asdrubali, Francesco, 2019. "Latest advances on solar thermal collectors: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 114(C), pages 1-1.
    6. Li, Xueling & Chang, Huawei & Duan, Chen & Zheng, Yao & Shu, Shuiming, 2019. "Thermal performance analysis of a novel linear cavity receiver for parabolic trough solar collectors," Applied Energy, Elsevier, vol. 237(C), pages 431-439.
    7. Gong, Jing-hu & Wang, Jun & Lund, Peter D. & Zhao, Dan-dan & Xu, Jing-wen & Jin, Yi-hao, 2021. "Comparative study of heat transfer enhancement using different fins in semi-circular absorber tube for large-aperture trough solar concentrator," Renewable Energy, Elsevier, vol. 169(C), pages 1229-1241.
    8. Madadi Avargani, Vahid & Norton, Brian & Rahimi, Amir, 2021. "An open-aperture partially-evacuated receiver for more uniform reflected solar flux in circular-trough reflectors: Comparative performance in air heating applications," Renewable Energy, Elsevier, vol. 176(C), pages 11-24.
    9. Chen, Xiaomeng & Yang, Xudong & Li, Muran, 2022. "Combining horizontal evacuated tubes with booster mirror reflector to achieve seasonal reverse output: Technical and experimental investigation," Renewable Energy, Elsevier, vol. 188(C), pages 450-464.
    10. Conceição, Ricardo & González-Aguilar, José & Merrouni, Ahmed Alami & Romero, Manuel, 2022. "Soiling effect in solar energy conversion systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    11. Chakraborty, Oveepsa, 2023. "Influence of spinning flower structure inserts in the thermal performance of LS-2 model of parabolic trough collector with ternary hybrid nanofluid," Renewable Energy, Elsevier, vol. 210(C), pages 215-228.
    12. Li, Qiong & Gao, Wenfeng & Lin, Wenxian & Liu, Tao & Zhang, Yougang & Ding, Xiang & Huang, Xiaoqiao & Liu, Wuming, 2020. "Experiment and simulation study on convective heat transfer of all-glass evacuated tube solar collector," Renewable Energy, Elsevier, vol. 152(C), pages 1129-1139.
    13. Chen, Xinge & Liang, Hao & Wu, Gang & Feng, Chaoqing & Tao, Tao & Ji, Yaning & Ma, Qianlei & Tong, Yuxin, 2023. "Coupled heat and humidity control system of narrow-trough solar collector and solid desiccant in Chinese solar greenhouse: Analysis of optical / thermal characteristics and experimental study," Energy, Elsevier, vol. 273(C).
    14. Dimitrios N. Korres & Evangelos Bellos & Christos Tzivanidis, 2022. "Integration of a Linear Cavity Receiver in an Asymmetric Compound Parabolic Collector," Energies, MDPI, vol. 15(22), pages 1-19, November.
    15. Zou, Wenlong & Yu, Gang & Du, Xiaoze, 2024. "Energy and exergy analysis of photovoltaic thermal collectors: Comprehensive investigation of operating parameters in different dynamic models," Renewable Energy, Elsevier, vol. 221(C).
    16. Abubakr, Mohamed & Amein, Hamza & Akoush, Bassem M. & El-Bakry, M. Medhat & Hassan, Muhammed A., 2020. "An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids," Renewable Energy, Elsevier, vol. 157(C), pages 130-149.
    17. Dimitrios N. Korres & Theodoros Papingiotis & Irene Koronaki & Christos Tzivanidis, 2023. "Thermal and Optical Analyses of a Hybrid Solar Photovoltaic/Thermal (PV/T) Collector with Asymmetric Reflector: Numerical Modeling and Validation with Experimental Results," Sustainability, MDPI, vol. 15(13), pages 1-22, June.
    18. Alshawaf, Mohammad & Poudineh, Rahmatallah & Alhajeri, Nawaf S., 2020. "Solar PV in Kuwait: The effect of ambient temperature and sandstorms on output variability and uncertainty," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    19. Nie, Yazhou & Deng, Mengsi & Shan, Ming & Yang, Xudong, 2023. "Clean and low-carbon heating in the building sector of China: 10-Year development review and policy implications," Energy Policy, Elsevier, vol. 179(C).
    20. Chinnasamy Subramaniyan & Jothirathinam Subramani & Balasubramanian Kalidasan & Natarajan Anbuselvan & Thangaraj Yuvaraj & Natarajan Prabaharan & Tomonobu Senjyu, 2021. "Investigation on the Optical Design and Performance of a Single-Axis-Tracking Solar Parabolic trough Collector with a Secondary Reflector," Sustainability, MDPI, vol. 13(17), pages 1-19, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:endesu:v:24:y:2022:i:9:d:10.1007_s10668-021-01888-x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.