IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i14p11365-d1199503.html
   My bibliography  Save this article

Simulation and Machine Learning Investigation on Thermoregulation Performance of Phase Change Walls

Author

Listed:
  • Xin Xiao

    (College of Environmental Science and Engineering, Donghua University, Shanghai 201620, China
    Yunnan Provincial Rural Energy Engineering Key Laboratory, Kunming 650550, China)

  • Qian Hu

    (College of Environmental Science and Engineering, Donghua University, Shanghai 201620, China)

  • Huansong Jiao

    (College of Environmental Science and Engineering, Donghua University, Shanghai 201620, China)

  • Yunfeng Wang

    (Yunnan Provincial Rural Energy Engineering Key Laboratory, Kunming 650550, China)

  • Ali Badiei

    (School of Engineering, University of Central Lancashire, Preston PR1 2HE, UK)

Abstract

The outdoor thermal environment can be regarded as a significant factor influencing indoor thermal conditions. The application of phase change materials (PCMs) to the building envelope has the potential to improve the heat storage performance of building walls and, therefore, effectively regulate the temperature variations of the inner surfaces of walls. COMSOL Multiphysics software was adopted firstly to perform the simulations on the thermoregulation performance of phase change wall; the time duration of the temperature at the internal side maintained within the thermal comfort range was used as a quantitative evaluation index of the thermoregulation effects. It was revealed from the simulation results that the time durations of thermal comfort were extended to 5021 s and 4102 s, respectively, when the brick walls were filled with two types of composite PCMs, namely eutectic hydrate (EHS, Na 2 CO 3 ·10H 2 O and Na 2 HPO 4 ·12H 2 O with the ratio of 4∶6)/5 wt.% BN and EHS/5 wt.% BN/7.5 wt.% expanded graphite (EG), under the conditions of 18 °C ambient temperature and 60 °C heating temperature at the charging stage. Both of them were longer than 3011 s, which corresponds to a pure brick wall. EHS/5 wt.% BN/7.5 wt.% EG exhibited better leakage prevention performance and, therefore, was a candidate for actual application, in comparison with EHS/5 wt.% BN. Then, a machine learning training process focused on the temperature control effects of phase change wall was carried out using a BP neural network, where the heating surface and ambient temperature were used as input variables and the time duration of indoor thermal comfort was the output variable. Finally, the learning deviation between the raw data and the results obtained from machine learning was within 5%, indicating that machine learning can accurately predict the temperature control effects of the phase change wall. The results of the simulations and machine learning can provide information and guidance for the advantages and potentials of PCMs of hydrate salts when being applied to the building envelope. In addition, the accurate prediction of machine learning demonstrated its application prospects to the research of phase change walls.

Suggested Citation

  • Xin Xiao & Qian Hu & Huansong Jiao & Yunfeng Wang & Ali Badiei, 2023. "Simulation and Machine Learning Investigation on Thermoregulation Performance of Phase Change Walls," Sustainability, MDPI, vol. 15(14), pages 1-22, July.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:11365-:d:1199503
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/14/11365/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/14/11365/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mi, Xuming & Liu, Ran & Cui, Hongzhi & Memon, Shazim Ali & Xing, Feng & Lo, Yiu, 2016. "Energy and economic analysis of building integrated with PCM in different cities of China," Applied Energy, Elsevier, vol. 175(C), pages 324-336.
    2. Li, Min & Yan, Dandan & Shi, Junbing, 2022. "Multi-scale simulation study on the heat transfer characteristics of phase-change walls," Energy, Elsevier, vol. 259(C).
    3. Zhang, Liang & Wen, Jin & Li, Yanfei & Chen, Jianli & Ye, Yunyang & Fu, Yangyang & Livingood, William, 2021. "A review of machine learning in building load prediction," Applied Energy, Elsevier, vol. 285(C).
    4. Benjamin Kubwimana & Hamidreza Najafi, 2023. "A Novel Approach for Optimizing Building Energy Models Using Machine Learning Algorithms," Energies, MDPI, vol. 16(3), pages 1-16, January.
    5. Atiq Ur Rehman & Shakil R. Sheikh & Zareena Kausar & Sarah J. McCormack, 2021. "Numerical Simulation of a Novel Dual Layered Phase Change Material Brick Wall for Human Comfort in Hot and Cold Climatic Conditions," Energies, MDPI, vol. 14(13), pages 1-19, July.
    6. Al-Shammari, Eiman Tamah & Keivani, Afram & Shamshirband, Shahaboddin & Mostafaeipour, Ali & Yee, Por Lip & Petković, Dalibor & Ch, Sudheer, 2016. "Prediction of heat load in district heating systems by Support Vector Machine with Firefly searching algorithm," Energy, Elsevier, vol. 95(C), pages 266-273.
    7. Zhu, Na & Li, Shanshan & Hu, Pingfang & Lei, Fei & Deng, Renjie, 2019. "Numerical investigations on performance of phase change material Trombe wall in building," Energy, Elsevier, vol. 187(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Feng Gao & Xin Xiao & Zhao Shu & Ke Zhong & Yunfeng Wang & Ming Li, 2024. "Investigation of Thermoregulation Effect of Stabilized Phase Change Gypsum Board with Different Structures in Buildings," Sustainability, MDPI, vol. 16(16), pages 1-13, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lizana, Jesus & de-Borja-Torrejon, Manuel & Barrios-Padura, Angela & Auer, Thomas & Chacartegui, Ricardo, 2019. "Passive cooling through phase change materials in buildings. A critical study of implementation alternatives," Applied Energy, Elsevier, vol. 254(C).
    2. Chen, Xuejun & Yang, Yongming & Cui, Zhixin & Shen, Jun, 2019. "Vibration fault diagnosis of wind turbines based on variational mode decomposition and energy entropy," Energy, Elsevier, vol. 174(C), pages 1100-1109.
    3. Chen, Zhelun & O’Neill, Zheng & Wen, Jin & Pradhan, Ojas & Yang, Tao & Lu, Xing & Lin, Guanjing & Miyata, Shohei & Lee, Seungjae & Shen, Chou & Chiosa, Roberto & Piscitelli, Marco Savino & Capozzoli, , 2023. "A review of data-driven fault detection and diagnostics for building HVAC systems," Applied Energy, Elsevier, vol. 339(C).
    4. Duan, Xiaojian & Shen, Chao & Liu, Dingming & Wu, Yupeng, 2023. "The performance analysis of a photo/thermal catalytic Trombe wall with energy generation," Renewable Energy, Elsevier, vol. 218(C).
    5. Gao, Datong & Zhao, Bin & Kwan, Trevor Hocksun & Hao, Yong & Pei, Gang, 2022. "The spatial and temporal mismatch phenomenon in solar space heating applications: status and solutions," Applied Energy, Elsevier, vol. 321(C).
    6. Bimaganbetova, Madina & Memon, Shazim Ali & Sheriyev, Almas, 2020. "Performance evaluation of phase change materials suitable for cities representing the whole tropical savanna climate region," Renewable Energy, Elsevier, vol. 148(C), pages 402-416.
    7. Souayfane, Farah & Biwole, Pascal Henry & Fardoun, Farouk & Achard, Patrick, 2019. "Energy performance and economic analysis of a TIM-PCM wall under different climates," Energy, Elsevier, vol. 169(C), pages 1274-1291.
    8. Xue, Puning & Zhou, Zhigang & Fang, Xiumu & Chen, Xin & Liu, Lin & Liu, Yaowen & Liu, Jing, 2017. "Fault detection and operation optimization in district heating substations based on data mining techniques," Applied Energy, Elsevier, vol. 205(C), pages 926-940.
    9. Du, Li & Ping, Lin & Yongming, Chen, 2020. "Study and analysis of air flow characteristics in Trombe wall," Renewable Energy, Elsevier, vol. 162(C), pages 234-241.
    10. Simões, N. & Manaia, M. & Simões, I., 2021. "Energy performance of solar and Trombe walls in Mediterranean climates," Energy, Elsevier, vol. 234(C).
    11. Ahmad, Tanveer & Madonski, Rafal & Zhang, Dongdong & Huang, Chao & Mujeeb, Asad, 2022. "Data-driven probabilistic machine learning in sustainable smart energy/smart energy systems: Key developments, challenges, and future research opportunities in the context of smart grid paradigm," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    12. Saafi, Khawla & Daouas, Naouel, 2019. "Energy and cost efficiency of phase change materials integrated in building envelopes under Tunisia Mediterranean climate," Energy, Elsevier, vol. 187(C).
    13. Liang, Xinbin & Liu, Zhuoxuan & Wang, Jie & Jin, Xinqiao & Du, Zhimin, 2023. "Uncertainty quantification-based robust deep learning for building energy systems considering distribution shift problem," Applied Energy, Elsevier, vol. 337(C).
    14. Li, Weilin & Jing, Mingyi & Li, Rufei & Gao, Junxi & Zhu, Jiayin & Li, Ruixin, 2023. "Study of the optimal placement of phase change materials in existing buildings for cooling load reduction - Take the Central Plain of China as an example," Renewable Energy, Elsevier, vol. 209(C), pages 71-84.
    15. Li, Yantong & Huang, Gongsheng & Xu, Tao & Liu, Xiaoping & Wu, Huijun, 2018. "Optimal design of PCM thermal storage tank and its application for winter available open-air swimming pool," Applied Energy, Elsevier, vol. 209(C), pages 224-235.
    16. Yan, Tian & Zhou, Xuan & Xu, Xinhua & Yu, Jinghua & Li, Xianting, 2022. "Parametric analysis on performances of the pipe-encapsulated PCM (PenPCM) wall system coupled with gravity heat-pipe and nocturnal radiant cooler," Renewable Energy, Elsevier, vol. 196(C), pages 161-180.
    17. Haiyan Meng & Yakai Lu & Zhe Tian & Xiangbei Jiang & Zhongqing Han & Jide Niu, 2023. "Performance Evaluation Method of Day-Ahead Load Prediction Models in a District Heating and Cooling System: A Case Study," Energies, MDPI, vol. 16(14), pages 1-19, July.
    18. Sögütoglu, L.C. & Donkers, P.A.J. & Fischer, H.R. & Huinink, H.P. & Adan, O.C.G., 2018. "In-depth investigation of thermochemical performance in a heat battery: Cyclic analysis of K2CO3, MgCl2 and Na2S," Applied Energy, Elsevier, vol. 215(C), pages 159-173.
    19. Joanna Piotrowska-Woroniak & Tomasz Szul, 2022. "Application of a Model Based on Rough Set Theory (RST) to Estimate the Energy Efficiency of Public Buildings," Energies, MDPI, vol. 15(23), pages 1-13, November.
    20. Zhong, Wei & Huang, Wei & Lin, Xiaojie & Li, Zhongbo & Zhou, Yi, 2020. "Research on data-driven identification and prediction of heat response time of urban centralized heating system," Energy, Elsevier, vol. 212(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:11365-:d:1199503. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.