IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i21p11871-d665929.html
   My bibliography  Save this article

Influence of Feedstock and Final Pyrolysis Temperature on Breaking Strength and Dust Production of Wood-Derived Biochars

Author

Listed:
  • María Videgain

    (Instituto Agroalimentario de Aragón—IA2 (CITA-UNIZAR), EPS-Universidad de Zaragoza, E-22071 Huesca, Spain)

  • Joan J. Manyà

    (Thermochemical Processes Group, Aragón Institute of Engineering Research (I3A), EPS, University of Zaragoza, E-22071 Huesca, Spain)

  • Mariano Vidal

    (Departamento de Ingeniería Mecánica, EPS, University of Zaragoza, E-22071 Huesca, Spain)

  • Eva Cristina Correa

    (Laboratorio de Propiedades Físicas y Técnicas Avanzadas en Agroalimentación, ETSIAAB, Universidad Politécnica de Madrid, E-28040 Madrid, Spain)

  • Belén Diezma

    (Laboratorio de Propiedades Físicas y Técnicas Avanzadas en Agroalimentación, ETSIAAB, Universidad Politécnica de Madrid, E-28040 Madrid, Spain)

  • Francisco Javier García-Ramos

    (Instituto Agroalimentario de Aragón—IA2 (CITA-UNIZAR), EPS-Universidad de Zaragoza, E-22071 Huesca, Spain)

Abstract

The susceptibility to fragmentation of biochar is an important property to consider in field applications. Physical and mechanical properties of wood-derived biochars from vine shoots and holm oak were studied to evaluate the effect of biomass feedstock, final pyrolysis temperature and application conditions. Vine shoots and holm oak pruning residues were selected for biochar production. Slow pyrolysis experiments were conducted at two different final temperatures (400 and 600 °C). Physical and chemical characteristics of biomass and biochars were determined. Impact strength was evaluated through the measurement of the gravitational potential energy per unit area (J mm −2 ) necessary for the breakage of biochar fragments. Shear strength (N mm −2 ) and a combination of shear/compression strengths (N) were analyzed using a Universal Texture Analyzer. A particular mechanical treatment was carried out on biochar samples to simulate the processing bodies of a commercial manure spreader, under two gravimetric moisture contents. Holm oak-derived biochar was more resistant than vine shoot-derived biochar to the applied forces. Vine shoots-derived biochar did not show a significantly different mechanical behavior between temperatures. Holm Oak-derived biochar produced at the higher final pyrolysis temperature showed higher resistance to be broken into smaller pieces. Moistening resulted in an adequate practice to improve mechanical spreading.

Suggested Citation

  • María Videgain & Joan J. Manyà & Mariano Vidal & Eva Cristina Correa & Belén Diezma & Francisco Javier García-Ramos, 2021. "Influence of Feedstock and Final Pyrolysis Temperature on Breaking Strength and Dust Production of Wood-Derived Biochars," Sustainability, MDPI, vol. 13(21), pages 1-15, October.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:21:p:11871-:d:665929
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/21/11871/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/21/11871/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Muhammad Ayaz & Dalia Feizienė & Vita Tilvikienė & Kashif Akhtar & Urte Stulpinaitė & Rashid Iqbal, 2021. "Biochar Role in the Sustainability of Agriculture and Environment," Sustainability, MDPI, vol. 13(3), pages 1-22, January.
    2. Inés López-Cano & María L. Cayuela & Claudio Mondini & Chibi A. Takaya & Andrew B. Ross & Miguel A. Sánchez-Monedero, 2018. "Suitability of Different Agricultural and Urban Organic Wastes as Feedstocks for the Production of Biochar—Part 1: Physicochemical Characterisation," Sustainability, MDPI, vol. 10(7), pages 1-18, July.
    3. Sasiwimol Khawkomol & Rattikan Neamchan & Thunchanok Thongsamer & Soydoa Vinitnantharat & Boonma Panpradit & Prapa Sohsalam & David Werner & Wojciech Mrozik, 2021. "Potential of Biochar Derived from Agricultural Residues for Sustainable Management," Sustainability, MDPI, vol. 13(15), pages 1-14, July.
    4. Anita Maienza & Lorenzo Genesio & Marco Acciai & Franco Miglietta & Emanuela Pusceddu & Francesco Primo Vaccari, 2017. "Impact of Biochar Formulation on the Release of Particulate Matter and on Short-Term Agronomic Performance," Sustainability, MDPI, vol. 9(7), pages 1-10, June.
    5. Inés López-Cano & María Luz Cayuela & María Sánchez-García & Miguel A. Sánchez-Monedero, 2018. "Suitability of Different Agricultural and Urban Organic Wastes as Feedstocks for the Production of Biochar—Part 2: Agronomical Evaluation as Soil Amendment," Sustainability, MDPI, vol. 10(6), pages 1-19, June.
    6. Greco, Gianluca & Di Stasi, Christian & Rego, Filipe & González, Belén & Manyà, Joan J., 2020. "Effects of slow-pyrolysis conditions on the products yields and properties and on exergy efficiency: A comprehensive assessment for wheat straw," Applied Energy, Elsevier, vol. 279(C).
    7. Collard, François-Xavier & Blin, Joël, 2014. "A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 594-608.
    8. Hu, Qiang & Shao, Jingai & Yang, Haiping & Yao, Dingding & Wang, Xianhua & Chen, Hanping, 2015. "Effects of binders on the properties of bio-char pellets," Applied Energy, Elsevier, vol. 157(C), pages 508-516.
    9. Taotao Yan & Jianhui Xue & Zhidong Zhou & Yongbo Wu, 2020. "The Trends in Research on the Effects of Biochar on Soil," Sustainability, MDPI, vol. 12(18), pages 1-23, September.
    10. Azargohar, Ramin & Nanda, Sonil & Kang, Kang & Bond, Toby & Karunakaran, Chithra & Dalai, Ajay K. & Kozinski, Janusz A., 2019. "Effects of bio-additives on the physicochemical properties and mechanical behavior of canola hull fuel pellets," Renewable Energy, Elsevier, vol. 132(C), pages 296-307.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gurtner, D. & Kresta, M. & Hupfauf, B. & Götz, P. & Nussbaumer, R. & Hofmann, A. & Pfeifer, C., 2023. "Mechanical strength characterisation of pyrolysis biochar from woody biomass," Energy, Elsevier, vol. 285(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xuyang Cui & Junhong Yang & Xinyu Shi & Wanning Lei & Tao Huang & Chao Bai, 2019. "Experimental Investigation on the Energy Consumption, Physical, and Thermal Properties of a Novel Pellet Fuel Made from Wood Residues with Microalgae as a Binder," Energies, MDPI, vol. 12(18), pages 1-26, September.
    2. Jianbiao Liu & Xuya Jiang & Yanhao Yuan & Huanhuan Chen & Wenbin Zhang & Hongzhen Cai & Feng Gao, 2022. "Densification of Yak Manure Biofuel Pellets and Evaluation of Parameters: Effects on Properties," Energies, MDPI, vol. 15(5), pages 1-14, February.
    3. Ajwal Dsouza & Gordon W. Price & Mike Dixon & Thomas Graham, 2021. "A Conceptual Framework for Incorporation of Composting in Closed-Loop Urban Controlled Environment Agriculture," Sustainability, MDPI, vol. 13(5), pages 1-27, February.
    4. Chen, Wei-Hsin & Lin, Bo-Jhih, 2016. "Characteristics of products from the pyrolysis of oil palm fiber and its pellets in nitrogen and carbon dioxide atmospheres," Energy, Elsevier, vol. 94(C), pages 569-578.
    5. Yang, Yuhan & Wang, Tiancheng & Hu, Hongyun & Yao, Dingding & Zou, Chan & Xu, Kai & Li, Xian & Yao, Hong, 2021. "Influence of partial components removal on pyrolysis behavior of lignocellulosic biowaste in molten salts," Renewable Energy, Elsevier, vol. 180(C), pages 616-625.
    6. Song, Xiaobing & Zhang, Shouyu & Wu, Yuanmo & Cao, Zhongyao, 2020. "Investigation on the properties of the bio-briquette fuel prepared from hydrothermal pretreated cotton stalk and wood sawdust," Renewable Energy, Elsevier, vol. 151(C), pages 184-191.
    7. Jun Sheng Teh & Yew Heng Teoh & Heoy Geok How & Thanh Danh Le & Yeoh Jun Jie Jason & Huu Tho Nguyen & Dong Lin Loo, 2021. "The Potential of Sustainable Biomass Producer Gas as a Waste-to-Energy Alternative in Malaysia," Sustainability, MDPI, vol. 13(7), pages 1-31, April.
    8. Primaz, Carmem T. & Ribes-Greus, Amparo & Jacques, Rosângela A., 2021. "Valorization of cotton residues for production of bio-oil and engineered biochar," Energy, Elsevier, vol. 235(C).
    9. Kluska, Jacek & Turzyński, Tomasz & Ochnio, Mateusz & Kardaś, Dariusz, 2020. "Characteristics of ash formation in the process of combustion of pelletised leather tannery waste and hardwood pellets," Renewable Energy, Elsevier, vol. 149(C), pages 1246-1253.
    10. Stachowicz, Paweł & Stolarski, Mariusz J., 2024. "Pellets from mixtures of short rotation coppice with forest-derived biomass: Production costs and energy intensity," Renewable Energy, Elsevier, vol. 225(C).
    11. Zane Vincevica-Gaile & Varvara Sachpazidou & Valdis Bisters & Maris Klavins & Olga Anne & Inga Grinfelde & Emil Hanc & William Hogland & Muhammad Asim Ibrahim & Yahya Jani & Mait Kriipsalu & Divya Pal, 2022. "Applying Macroalgal Biomass as an Energy Source: Utility of the Baltic Sea Beach Wrack for Thermochemical Conversion," Sustainability, MDPI, vol. 14(21), pages 1-18, October.
    12. Qin, Fanzhi & Zhang, Chen & Zeng, Guangming & Huang, Danlian & Tan, Xiaofei & Duan, Abing, 2022. "Lignocellulosic biomass carbonization for biochar production and characterization of biochar reactivity," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    13. Abdulyekeen, Kabir Abogunde & Daud, Wan Mohd Ashri Wan & Patah, Muhamad Fazly Abdul, 2024. "Torrefaction of wood and garden wastes from municipal solid waste to enhanced solid fuel using helical screw rotation-induced fluidised bed reactor: Effect of particle size, helical screw speed and te," Energy, Elsevier, vol. 293(C).
    14. Cristina Muñoz & Milagros Ginebra & Erick Zagal, 2019. "Variation of Greenhouse Gases Fluxes and Soil Properties with Addition of Biochar from Farm-Wastes in Volcanic and Non-Volcanic Soils," Sustainability, MDPI, vol. 11(7), pages 1-14, March.
    15. Sitek, Tomáš & Pospíšil, Jiří & Poláčik, Ján & Špiláček, Michal & Varbanov, Petar, 2019. "Fine combustion particles released during combustion of unit mass of beechwood," Renewable Energy, Elsevier, vol. 140(C), pages 390-396.
    16. Devasahayam, Sheila & Albijanic, Boris, 2024. "Predicting hydrogen production from co-gasification of biomass and plastics using tree based machine learning algorithms," Renewable Energy, Elsevier, vol. 222(C).
    17. Alam, Mahboob & Bhavanam, Anjireddy & Jana, Ashirbad & Viroja, Jaimin kumar S. & Peela, Nageswara Rao, 2020. "Co-pyrolysis of bamboo sawdust and plastic: Synergistic effects and kinetics," Renewable Energy, Elsevier, vol. 149(C), pages 1133-1145.
    18. Kawale, Harshal D. & Kishore, Nanda, 2019. "Production of hydrocarbons from a green algae (Oscillatoria) with exploration of its fuel characteristics over different reaction atmospheres," Energy, Elsevier, vol. 178(C), pages 344-355.
    19. Yu-Chiao Lu & Liviu Brabie & Andrey V. Karasev & Chuan Wang, 2022. "Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 2: Carburization of Liquid Iron by Addition of Iron–Carbon Briquettes," Sustainability, MDPI, vol. 14(9), pages 1-20, April.
    20. Chen, Yu-Kai & Lin, Cheng-Han & Wang, Wei-Cheng, 2020. "The conversion of biomass into renewable jet fuel," Energy, Elsevier, vol. 201(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:21:p:11871-:d:665929. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.