IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i8p3331-d1119035.html
   My bibliography  Save this article

Ashes Qualified as a Source of Selected Critical Elements (REY, Co, Ga, V)

Author

Listed:
  • Ewa Strzałkowska

    (Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 4-100 Gliwice, Poland)

Abstract

The subject of the research involved fly ashes from several power plants in Poland, produced in the process of hard coal and lignite combustion. The objective of this article was to determine the concentration and distribution of elements strategic for the EU economy in ashes and in their two finest grain classes (below 20 µm and 45 µm). The differences in grain size of these ashes, as shown by granulometric tests, were significant. The concentrations of elements in the ashes and in grain classes were compared with the world average (Clarke value) for this raw material. For the majority of critical elements, a dependence of the concentration on the size of ash particles was observed. The content of REY (Rare earth elements and yttrium) and other critical elements in hard coal ashes increases with decreasing particle size. Despite the increase in the concentration of REY in the class below 20 µm, the Clarke value of these elements was not exceeded. Pearson’s correlation coefficients confirmed the interdependence between some elements of the ashes. The distribution of trace elements in grain classes of the ash was determined on the basis of observations using a scanning electron microscope equipped with an EDS (Energy Dispersive Spectroscopy) detector. Components of fly ashes that can be treated as an alternative source of strategic elements for the European Union were indicated.

Suggested Citation

  • Ewa Strzałkowska, 2023. "Ashes Qualified as a Source of Selected Critical Elements (REY, Co, Ga, V)," Energies, MDPI, vol. 16(8), pages 1-19, April.
  • Handle: RePEc:gam:jeners:v:16:y:2023:i:8:p:3331-:d:1119035
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/8/3331/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/16/8/3331/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Agnieszka Bielecka & Joanna Kulczycka, 2020. "Coal Combustion Products Management toward a Circular Economy—A Case Study of the Coal Power Plant Sector in Poland," Energies, MDPI, vol. 13(14), pages 1-15, July.
    2. Aleksandras Chlebnikovas & Dainius Paliulis & Artūras Kilikevičius & Jaroslaw Selech & Jonas Matijošius & Kristina Kilikevičienė & Darius Vainorius, 2021. "Possibilities and Generated Emissions of Using Wood and Lignin Biofuel for Heat Production," Energies, MDPI, vol. 14(24), pages 1-18, December.
    3. Jan Wrona & Witold Żukowski & Dariusz Bradło & Piotr Czupryński, 2020. "Recovery of Cenospheres and Fine Fraction from Coal Fly Ash by a Novel Dry Separation Method," Energies, MDPI, vol. 13(14), pages 1-14, July.
    4. Mokrzycki, Eugeniusz & Uliasz-Bochenczyk, Alicja & Sarna, Mieczyslaw, 2003. "Use of alternative fuels in the Polish cement industry," Applied Energy, Elsevier, vol. 74(1-2), pages 101-111, January.
    5. Erick Grünhäuser Soares & João Castro-Gomes & Mateusz Sitarz & Tomasz Zdeb & Izabela Hager, 2021. "The Immobilisation of Heavy Metals from Sewage Sludge Ash in CO 2 -Cured Mortars," Sustainability, MDPI, vol. 13(22), pages 1-13, November.
    6. Amanda Qinisile Vilakazi & Sehliselo Ndlovu & Liberty Chipise & Alan Shemi, 2022. "The Recycling of Coal Fly Ash: A Review on Sustainable Developments and Economic Considerations," Sustainability, MDPI, vol. 14(4), pages 1-32, February.
    7. Mokrzycki, Eugeniusz & Uliasz- Bochenczyk, Alicja, 2003. "Alternative fuels for the cement industry," Applied Energy, Elsevier, vol. 74(1-2), pages 95-100, January.
    8. Joanna Irena Odzijewicz & Elżbieta Wołejko & Urszula Wydro & Mariola Wasil & Agata Jabłońska-Trypuć, 2022. "Utilization of Ashes from Biomass Combustion," Energies, MDPI, vol. 15(24), pages 1-16, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, C.A., 2016. "Cement manufacturing using alternative fuels: Enhanced productivity and environmental compliance via oxygen enrichment," Energy, Elsevier, vol. 113(C), pages 1202-1218.
    2. Teklay, Abraham & Yin, Chungen & Rosendahl, Lasse, 2016. "Flash calcination of kaolinite rich clay and impact of process conditions on the quality of the calcines: A way to reduce CO2 footprint from cement industry," Applied Energy, Elsevier, vol. 162(C), pages 1218-1224.
    3. Mikulčić, Hrvoje & Vujanović, Milan & Duić, Neven, 2013. "Reducing the CO2 emissions in Croatian cement industry," Applied Energy, Elsevier, vol. 101(C), pages 41-48.
    4. Lamas, Wendell de Queiroz & Palau, Jose Carlos Fortes & Camargo, Jose Rubens de, 2013. "Waste materials co-processing in cement industry: Ecological efficiency of waste reuse," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 200-207.
    5. Huh, Sung-Yoon & Lee, Hyejin & Shin, Jungwoo & Lee, Donghyun & Jang, Jinyoung, 2018. "Inter-fuel substitution path analysis of the korea cement industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 4091-4099.
    6. Reza, Bahareh & Soltani, Atousa & Ruparathna, Rajeev & Sadiq, Rehan & Hewage, Kasun, 2013. "Environmental and economic aspects of production and utilization of RDF as alternative fuel in cement plants: A case study of Metro Vancouver Waste Management," Resources, Conservation & Recycling, Elsevier, vol. 81(C), pages 105-114.
    7. Grzegorz Ludwik Golewski, 2020. "Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition," Energies, MDPI, vol. 13(9), pages 1-20, May.
    8. Saidur, R. & Atabani, A.E. & Mekhilef, S., 2011. "A review on electrical and thermal energy for industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2073-2086, May.
    9. Tsiligiannis, Aristeides & Tsiliyannis, Christos, 2020. "Oil refinery sludge and renewable fuel blends as energy sources for the cement industry," Renewable Energy, Elsevier, vol. 157(C), pages 55-70.
    10. Puig-Arnavat, Maria & Søgaard, Martin & Hjuler, Klaus & Ahrenfeldt, Jesper & Henriksen, Ulrik Birk & Hendriksen, Peter Vang, 2015. "Integration of oxygen membranes for oxygen production in cement plants," Energy, Elsevier, vol. 91(C), pages 852-865.
    11. Essossinam Beguedou & Satyanarayana Narra & Ekua Afrakoma Armoo & Komi Agboka & Mani Kongnine Damgou, 2023. "Alternative Fuels Substitution in Cement Industries for Improved Energy Efficiency and Sustainability," Energies, MDPI, vol. 16(8), pages 1-29, April.
    12. Cho, Seong-Heon & Oh, Jeong-Ik & Jung, Sungyup & Park, Young-Kwon & Tsang, Yiu Fai & Ok, Yong Sik & Kwon, Eilhann E., 2020. "Catalytic pyrolytic platform for scrap tires using CO2 and steel slag," Applied Energy, Elsevier, vol. 259(C).
    13. Xinhang Xu & Chongchong Qi & Xabier M. Aretxabaleta & Chundi Ma & Dino Spagnoli & Hegoi Manzano, 2024. "The initial stages of cement hydration at the molecular level," Nature Communications, Nature, vol. 15(1), pages 1-10, December.
    14. Li, Jia & Tharakan, Pradeep & Macdonald, Douglas & Liang, Xi, 2013. "Technological, economic and financial prospects of carbon dioxide capture in the cement industry," Energy Policy, Elsevier, vol. 61(C), pages 1377-1387.
    15. Song, Dan & Yang, Jin & Chen, Bin & Hayat, Tasawar & Alsaedi, Ahmed, 2016. "Life-cycle environmental impact analysis of a typical cement production chain," Applied Energy, Elsevier, vol. 164(C), pages 916-923.
    16. Ali, M.B. & Saidur, R. & Hossain, M.S., 2011. "A review on emission analysis in cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2252-2261, June.
    17. Sandberg, Erik & Toffolo, Andrea & Krook-Riekkola, Anna, 2019. "A bottom-up study of biomass and electricity use in a fossil free Swedish industry," Energy, Elsevier, vol. 167(C), pages 1019-1030.
    18. Bernardo, G. & Marroccoli, M. & Nobili, M. & Telesca, A. & Valenti, G.L., 2007. "The use of oil well-derived drilling waste and electric arc furnace slag as alternative raw materials in clinker production," Resources, Conservation & Recycling, Elsevier, vol. 52(1), pages 95-102.
    19. Christos Aristeides Tsiliyannis, 2018. "Industrial Wastes and By‐products as Alternative Fuels in Cement Plants: Evaluation of an Industrial Symbiosis Option," Journal of Industrial Ecology, Yale University, vol. 22(5), pages 1170-1188, October.
    20. Martínez, Juan Daniel & Puy, Neus & Murillo, Ramón & García, Tomás & Navarro, María Victoria & Mastral, Ana Maria, 2013. "Waste tyre pyrolysis – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 179-213.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:8:p:3331-:d:1119035. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.