IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i14p5472-d1197304.html
   My bibliography  Save this article

Study of the Variation of Fuel Pressure to Improve Spraying and the Range of the Injection Jet

Author

Listed:
  • Vicente Rojas-Reinoso

    (Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador)

  • Stalin Duque-Escobar

    (Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador)

  • Christian Guapulema-Guapulema

    (Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador)

  • José Antonio Soriano

    (Instituto de Investigación Aplicada a la Industria Aeronáutica, Escuela de Ingeniería Industrial y Aeroespacial, Campus de Excelencia Internacional en Energía y Medioambiente, Universidad de Castilla-La Mancha, Av. Carlos III, s/n, 45071 Toledo, Spain)

Abstract

The current study is focused on how varying injection pressure in the fuel supply system of multi-point injection systems can improve fuel atomization and injection jet range. The aim is to achieve a more efficient mix dosage, thus improving combustion and reducing exhaust emissions. In addition, it is intended to develop a characterization of the injection actuators, specifically the injectors, through a series of tests in which the injector pressure, engine speed and injection pulse are modified. To carry out these tests, a heuristic testing technique, like the empirical approach, was implemented, and a mobile device was used to capture the spray frames of the injectors. These data were then used to generate a correlation model between injection and spray angles, considering 0.5 bar pressure variation intervals within the established ranges. This approach made it possible to visualize and record the behavior of the spray in the injector, including the spray angle, the injected fuel flow rate and the working pressure during the operation process. Following the guidelines established in the proposed methodology, a significant result was obtained by varying the pressure at 5 bar and with an injection pulse of 2 ms. In this case, a flow reduction of 66 mL of the injected fluid was achieved, which corresponds to a significant reduction in fuel consumption. Additionally, a spray angle of 10.48° was observed with optimized atomization. These results were verified on vehicles with similar injection systems by testing on the GT-600-PRO injection test bench. In summary, this study shows that by varying the injection pressure and optimizing other parameters, it is possible to achieve a significant reduction in fuel consumption and improve fuel atomization in multipoint injection systems. These findings have a significant impact on the Ecuadorian vehicle fleet and provide a scientific approach to improving fuel efficiency and performance.

Suggested Citation

  • Vicente Rojas-Reinoso & Stalin Duque-Escobar & Christian Guapulema-Guapulema & José Antonio Soriano, 2023. "Study of the Variation of Fuel Pressure to Improve Spraying and the Range of the Injection Jet," Energies, MDPI, vol. 16(14), pages 1-20, July.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:14:p:5472-:d:1197304
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/14/5472/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/14/5472/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Qian, Yong & Li, Zilong & Yu, Liang & Wang, Xiaole & Lu, Xingcai, 2019. "Review of the state-of-the-art of particulate matter emissions from modern gasoline fueled engines," Applied Energy, Elsevier, vol. 238(C), pages 1269-1298.
    2. Huang, Yuhan & Surawski, Nic C. & Zhuang, Yuan & Zhou, John L. & Hong, Guang, 2021. "Dual injection: An effective and efficient technology to use renewable fuels in spark ignition engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Al-Qahtani, Amjad & González-Garay, Andrés & Bernardi, Andrea & Galán-Martín, Ángel & Pozo, Carlos & Dowell, Niall Mac & Chachuat, Benoit & Guillén-Gosálbez, Gonzalo, 2020. "Electricity grid decarbonisation or green methanol fuel? A life-cycle modelling and analysis of today′s transportation-power nexus," Applied Energy, Elsevier, vol. 265(C).
    2. Shen, Bo & Su, Yan & Yu, Hao & Zhang, Yulin & Lang, Maochun & Yang, He, 2023. "Experimental study on the effect of injection strategies on the combustion and emissions characteristic of gasoline/methanol dual-fuel turbocharged engine under high load," Energy, Elsevier, vol. 282(C).
    3. Cinzia Tornatore & Luca Marchitto & Maria Antonietta Costagliola & Gerardo Valentino, 2019. "Experimental Comparative Study on Performance and Emissions of E85 Adopting Different Injection Approaches in a Turbocharged PFI SI Engine," Energies, MDPI, vol. 12(8), pages 1-15, April.
    4. Catapano, Francesco & Di Iorio, Silvana & Magno, Agnese & Vaglieco, Bianca Maria, 2022. "Effect of fuel quality on combustion evolution and particle emissions from PFI and GDI engines fueled with gasoline, ethanol and blend, with focus on 10–23 nm particles," Energy, Elsevier, vol. 239(PB).
    5. Zuo, Qingsong & Xie, Yong & E, Jiaqiang & Zhu, Xinning & Zhang, Bin & Tang, Yuanyou & Zhu, Guohui & Wang, Zhiqi & Zhang, Jianping, 2020. "Effect of different exhaust parameters on NO conversion efficiency enhancement of a dual-carrier catalytic converter in the gasoline engine," Energy, Elsevier, vol. 191(C).
    6. Zhu, Xinning & Zuo, Qingsong & Tang, Yuanyou & Xie, Yong & Shen, Zhuang & Yang, Xiaomei, 2022. "Performance enhancement of equilibrium regeneration in a gasoline particulate filter based on field synergy theory," Energy, Elsevier, vol. 244(PA).
    7. Yang, Yubeen & Kim, Jisoo & Kim, Namho & Park, Sungwook, 2024. "Effects of continuous variable valve timing and duration on fuel/air mixture formation," Energy, Elsevier, vol. 306(C).
    8. Wang, Xiaochen & Gao, Jianbing & Chen, Zhanming & Chen, Hao & Zhao, Yuwei & Huang, Yuhan & Chen, Zhenbin, 2022. "Evaluation of hydrous ethanol as a fuel for internal combustion engines: A review," Renewable Energy, Elsevier, vol. 194(C), pages 504-525.
    9. Jiang, Changzhao & Parker, Matthew C. & Butcher, Daniel & Spencer, Adrian & Garner, Colin P. & Helie, Jerome, 2019. "Comparison of flash boiling resistance of two injector designs and the consequences on downsized gasoline engine emissions," Applied Energy, Elsevier, vol. 254(C).
    10. Fan, Qinhao & Liu, Shang & Qi, Yunliang & Cai, Kaiyuan & Wang, Zhi, 2021. "Investigation into ethanol effects on combustion and particle number emissions in a spark-ignition to compression-ignition (SICI) engine," Energy, Elsevier, vol. 233(C).
    11. M. Feroskhan & Saleel Ismail & Gobinath Natarajan & Sreekanth Manavalla & T. M. Yunus Khan & Shaik Dawood Abdul Khadar & Mohammed Azam Ali, 2023. "A Comprehensive Study of the Effects of Various Operating Parameters on a Biogas-Diesel Dual Fuel Engine," Sustainability, MDPI, vol. 15(2), pages 1-21, January.
    12. Paolo Sementa & Cinzia Tornatore & Francesco Catapano & Silvana Di Iorio & Bianca Maria Vaglieco, 2023. "Custom-Designed Pre-Chamber: Investigating the Effects on Small SI Engine in Active and Passive Modes," Energies, MDPI, vol. 16(13), pages 1-24, July.
    13. Hosseinzadeh, Ahmad & Zhou, John L. & Li, Xiaowei & Afsari, Morteza & Altaee, Ali, 2022. "Techno-economic and environmental impact assessment of hydrogen production processes using bio-waste as renewable energy resource," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    14. Huayu Tian & Jun Wang & Ran Zhang & Yulin Zhang & Yan Su & Hao Yu & Bo Shen, 2023. "Experimental Study on Macroscopic Spray and Fuel Film Characteristics of E40 in a Constant Volume Chamber," Energies, MDPI, vol. 16(22), pages 1-13, November.
    15. Wen, Yifan & Zhang, Shaojun & Zhang, Jingran & Bao, Shuanghui & Wu, Xiaomeng & Yang, Daoyuan & Wu, Ye, 2020. "Mapping dynamic road emissions for a megacity by using open-access traffic congestion index data," Applied Energy, Elsevier, vol. 260(C).
    16. Wang, Yujun & Kamp, Carl J. & Wang, Yuesen & Toops, Todd J. & Su, Changsheng & Wang, Ruoqian & Gong, Jian & Wong, Victor W., 2020. "The origin, transport, and evolution of ash in engine particulate filters," Applied Energy, Elsevier, vol. 263(C).
    17. Gong, Changming & Yi, Lin & Zhang, Zilei & Sun, Jingzhen & Liu, Fenghua, 2020. "Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios," Applied Energy, Elsevier, vol. 261(C).
    18. Liu, Zengbin & Zhen, Xudong & Tian, Zhi & Liu, Daming & Wang, Yang, 2024. "Study on the effect of injection strategy on the combustion and emission characteristics of direct injection spark ignition bio-butanol engine," Energy, Elsevier, vol. 289(C).
    19. Dong Lin Loo & Yew Heng Teoh & Heoy Geok How & Jun Sheng Teh & Liviu Catalin Andrei & Slađana Starčević & Farooq Sher, 2021. "Applications Characteristics of Different Biodiesel Blends in Modern Vehicles Engines: A Review," Sustainability, MDPI, vol. 13(17), pages 1-31, August.
    20. Ghadikolaei, Meisam Ahmadi & Wong, Pak Kin & Cheung, Chun Shun & Ning, Zhi & Yung, Ka-Fu & Zhao, Jing & Gali, Nirmal Kumar & Berenjestanaki, Alireza Valipour, 2021. "Impact of lower and higher alcohols on the physicochemical properties of particulate matter from diesel engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:14:p:5472-:d:1197304. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.