IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i11p4364-d1157290.html
   My bibliography  Save this article

Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization

Author

Listed:
  • Regelii Suassuna de Andrade Ferreira

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

  • Patrick Picher

    (Hydro-Québec’s Research Institute (IREQ), Varennes, QC J3X 1S1, Canada)

  • Fethi Meghnefi

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

  • Issouf Fofana

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

  • Hassan Ezzaidi

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

  • Christophe Volat

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

  • Vahid Behjat

    (Research Chair on the Aging of Power Network Infrastructure (ViAHT), Department of Applied Sciences (DSA), Université du Québec à Chicoutimi (UQAC), Saguenay, QC G7H 2B1, Canada)

Abstract

Frequency response analysis (FRA) is being employed worldwide as one of the main methods for the internal condition assessment of transformers due to its capability of detecting mechanical changes. Nonetheless, the objective interpretation of FRA measurements is still a challenge for the industry. This is mainly attributable to the lack of complete data from the same or similar units. A large database of FRA measurements can contribute to improving classification algorithms and lead to a more objective interpretation. Due to their destructive nature, mechanical deformations cannot be performed on real transformers to collect data from different scenarios. The use of simulation and laboratory transformer models is necessary. This research contribution is based on a new method using Finite Element Method simulation and a lumped element circuit to obtain FRA traces from a laboratory model at healthy and faulty states, along with an optimization method to improve capacitive parameters from estimated values. The results show that measured and simulated FRA traces are in good agreement. Furthermore, the faulty FRA traces were analyzed to obtain the characterization of faults based on the variation of the lumped element’s parameters. This supports the use of the proposed method in the generation of faulty frequency response traces and its further use in classifying and localizing faults in the transformer windings. The proposed approach is therefore tailored for generating a larger and unique database of FRA traces with industrial importance and academic significance.

Suggested Citation

  • Regelii Suassuna de Andrade Ferreira & Patrick Picher & Fethi Meghnefi & Issouf Fofana & Hassan Ezzaidi & Christophe Volat & Vahid Behjat, 2023. "Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization," Energies, MDPI, vol. 16(11), pages 1-14, May.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:11:p:4364-:d:1157290
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/11/4364/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/11/4364/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Kalina Detka & Krzysztof Górecki & Piotr Grzejszczak & Roman Barlik, 2021. "Modeling and Measurements of Properties of Coupled Inductors," Energies, MDPI, vol. 14(14), pages 1-17, July.
    2. Saleh Alsuhaibani & Yasin Khan & Abderrahmane Beroual & Nazar Hussain Malik, 2016. "A Review of Frequency Response Analysis Methods for Power Transformer Diagnostics," Energies, MDPI, vol. 9(11), pages 1-17, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiefeng Liu & Hanbo Zheng & Yiyi Zhang & Hua Wei & Ruijin Liao, 2017. "Grey Relational Analysis for Insulation Condition Assessment of Power Transformers Based Upon Conventional Dielectric Response Measurement," Energies, MDPI, vol. 10(10), pages 1-16, October.
    2. Szymon Banaszak & Konstanty Marek Gawrylczyk & Katarzyna Trela, 2020. "Frequency Response Modelling of Transformer Windings Connected in Parallel," Energies, MDPI, vol. 13(6), pages 1-13, March.
    3. Szymon Banaszak & Wojciech Szoka, 2018. "Cross Test Comparison in Transformer Windings Frequency Response Analysis," Energies, MDPI, vol. 11(6), pages 1-12, May.
    4. Krzysztof Górecki & Kalina Detka, 2023. "SPICE-Aided Models of Magnetic Elements—A Critical Review," Energies, MDPI, vol. 16(18), pages 1-27, September.
    5. Maciej Kuniewski, 2020. "FRA Diagnostics Measurement of Winding Deformation in Model Single-Phase Transformers Made with Silicon-Steel, Amorphous and Nanocrystalline Magnetic Cores," Energies, MDPI, vol. 13(10), pages 1-23, May.
    6. Song Wang & Ze Guo & Ting Zhu & Hanke Feng & Shuhong Wang, 2018. "A New Multi-Conductor Transmission Line Model of Transformer Winding for Frequency Response Analysis Considering the Frequency-Dependent Property of the Lamination Core," Energies, MDPI, vol. 11(4), pages 1-12, April.
    7. Yeunggurl Yoon & Yongju Son & Jintae Cho & SuHyeong Jang & Young-Geun Kim & Sungyun Choi, 2021. "High-Frequency Modeling of a Three-Winding Power Transformer Using Sweep Frequency Response Analysis," Energies, MDPI, vol. 14(13), pages 1-10, July.
    8. Tomasz Piotrowski & Pawel Rozga & Ryszard Kozak, 2019. "Comparative Analysis of the Results of Diagnostic Measurements with an Internal Inspection of Oil-Filled Power Transformers," Energies, MDPI, vol. 12(11), pages 1-18, June.
    9. Szymon Banaszak & Eugeniusz Kornatowski & Wojciech Szoka, 2021. "The Influence of the Window Width on FRA Assessment with Numerical Indices," Energies, MDPI, vol. 14(2), pages 1-18, January.
    10. Qing Yang & Peiyu Su & Yong Chen, 2017. "Comparison of Impulse Wave and Sweep Frequency Response Analysis Methods for Diagnosis of Transformer Winding Faults," Energies, MDPI, vol. 10(4), pages 1-16, March.
    11. Shuguo Gao & Chao Xing & Zhigang Zhang & Chenmeng Xiang & Haoyu Liu & Hongliang Liu & Rongbin Shi & Sihan Wang & Guoming Ma, 2022. "Early Warning of High-Voltage Reactor Defects Based on Acoustic–Electric Correlation," Energies, MDPI, vol. 15(19), pages 1-11, September.
    12. Fabio Corti & Alberto Reatti & Gabriele Maria Lozito & Ermanno Cardelli & Antonino Laudani, 2021. "Influence of Non-Linearity in Losses Estimation of Magnetic Components for DC-DC Converters," Energies, MDPI, vol. 14(20), pages 1-16, October.
    13. Zhongyong Zhao & Chao Tang & Qu Zhou & Lingna Xu & Yingang Gui & Chenguo Yao, 2017. "Identification of Power Transformer Winding Mechanical Fault Types Based on Online IFRA by Support Vector Machine," Energies, MDPI, vol. 10(12), pages 1-16, December.
    14. Eugeniusz Kornatowski & Szymon Banaszak, 2019. "Frequency Response Quality Index for Assessing the Mechanical Condition of Transformer Windings," Energies, MDPI, vol. 13(1), pages 1-15, December.
    15. Konstanty Marek Gawrylczyk & Katarzyna Trela, 2019. "Frequency Response Modeling of Transformer Windings Utilizing the Equivalent Parameters of a Laminated Core," Energies, MDPI, vol. 12(12), pages 1-14, June.
    16. Benhui Lai & Shichang Yang & Heng Zhang & Yiyi Zhang & Xianhao Fan & Jiefeng Liu, 2020. "Performance Assessment of Oil-Immersed Cellulose Insulator Materials Using Time–Domain Spectroscopy under Varying Temperature and Humidity Conditions," Energies, MDPI, vol. 13(17), pages 1-14, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:11:p:4364-:d:1157290. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.