IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i4p1339-d748157.html
   My bibliography  Save this article

Stress Coupling Analysis and Failure Damage Evaluation of Wind Turbine Blades during Strong Winds

Author

Listed:
  • Kangqi Tian

    (College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China)

  • Li Song

    (College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
    Key Laboratory of Wind Energy and Solar Energy Technology, Ministry of Education, Hohhot 010051, China
    Key Laboratory of Renewable Energy in Inner Mongolia, Hohhot 010051, China)

  • Yongyan Chen

    (College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
    Key Laboratory of Wind Energy and Solar Energy Technology, Ministry of Education, Hohhot 010051, China
    Key Laboratory of Renewable Energy in Inner Mongolia, Hohhot 010051, China)

  • Xiaofeng Jiao

    (Inner Mongolia Power Science Research Institute, Hohhot 010051, China)

  • Rui Feng

    (Guoshui Group Huade Wind Power Co., Ltd., Ulanqab 012000, China)

  • Rui Tian

    (College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
    Key Laboratory of Wind Energy and Solar Energy Technology, Ministry of Education, Hohhot 010051, China
    Key Laboratory of Renewable Energy in Inner Mongolia, Hohhot 010051, China)

Abstract

Blades in strong wind conditions are prone to various failures and damage that is due to the action of random variable amplitude loads. In this study, we analyze the failure of 1.5 MW horizontal axis wind turbine blades. The computational fluid dynamics unsteady calculation method is used to simulate the aerodynamic load distribution on the blade. Fluid–structure coupling methods are applied to calculate the blade stress. The results show that the equivalent stress of the blade is the largest when the azimuth angle is 30°, and the maximum equivalent stress is 20.60 MPa. There are obvious stress peaks in six sections, such as r/R = 0.10 (the span length of blade/the full length of the blade = 0.10). The frequency of damage that is caused by the stress in each area of the blade is determined based on the blade damage. The frequency of gel coat cracking in the blade tips and leaves is 77.78% and 22.22%, respectively, and the frequency of crack occurrence is 87.75%, 10.20% and 2.05%, respectively. By combining the stress concentration area and the damage results, the cause of blade damage is determined, which can replace the traditional inspection methods and improve the inspection efficiency.

Suggested Citation

  • Kangqi Tian & Li Song & Yongyan Chen & Xiaofeng Jiao & Rui Feng & Rui Tian, 2022. "Stress Coupling Analysis and Failure Damage Evaluation of Wind Turbine Blades during Strong Winds," Energies, MDPI, vol. 15(4), pages 1-19, February.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:4:p:1339-:d:748157
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/4/1339/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/4/1339/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wang, H. & Ke, S.T. & Wang, T.G. & Zhu, S.Y., 2020. "Typhoon-induced vibration response and the working mechanism of large wind turbine considering multi-stage effects," Renewable Energy, Elsevier, vol. 153(C), pages 740-758.
    2. Thanhtoan Tran & Donghyun Kim & Jinseop Song, 2014. "Computational Fluid Dynamic Analysis of a Floating Offshore Wind Turbine Experiencing Platform Pitching Motion," Energies, MDPI, vol. 7(8), pages 1-16, August.
    3. Mathijs Peeters & Gilberto Santo & Joris Degroote & Wim Van Paepegem, 2018. "Comparison of Shell and Solid Finite Element Models for the Static Certification Tests of a 43 m Wind Turbine Blade," Energies, MDPI, vol. 11(6), pages 1-18, May.
    4. Choudhury, Santanu & Sharma, Tushar & Shukla, K.K., 2017. "Effect of orthotropy ratio of the shear web on the aero-elasticity and torque generation of a hybrid wind turbine blade," Renewable Energy, Elsevier, vol. 113(C), pages 1378-1387.
    5. Mesfin Belayneh Ageze & Yefa Hu & Huachun Wu, 2017. "Comparative Study on Uni- and Bi-Directional Fluid Structure Coupling of Wind Turbine Blades," Energies, MDPI, vol. 10(10), pages 1-21, September.
    6. Shen, Xin & Zhu, Xiaocheng & Du, Zhaohui, 2011. "Wind turbine aerodynamics and loads control in wind shear flow," Energy, Elsevier, vol. 36(3), pages 1424-1434.
    7. Santo, G. & Peeters, M. & Van Paepegem, W. & Degroote, J., 2019. "Dynamic load and stress analysis of a large horizontal axis wind turbine using full scale fluid-structure interaction simulation," Renewable Energy, Elsevier, vol. 140(C), pages 212-226.
    8. Cheng, Youliang & Xue, Zhanpu & Jiang, Tuo & Wang, Wenyang & Wang, Yuekun, 2018. "Numerical simulation on dynamic response of flexible multi-body tower blade coupling in large wind turbine," Energy, Elsevier, vol. 152(C), pages 601-612.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Galih Bangga, 2022. "Progress and Outlook in Wind Energy Research," Energies, MDPI, vol. 15(18), pages 1-5, September.
    2. Kaishan Wang & Di Wu & Kai Wu & Kun Yu & Chongwei Zheng, 2023. "Interdecadal Variation Trend of Arctic Wind Energy," Energies, MDPI, vol. 16(18), pages 1-19, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gilberto Santo & Mathijs Peeters & Wim Van Paepegem & Joris Degroote, 2019. "Numerical Investigation of the Effect of Tower Dam and Rotor Misalignment on Performance and Loads of a Large Wind Turbine in the Atmospheric Boundary Layer," Energies, MDPI, vol. 12(7), pages 1-19, March.
    2. Shen, Xin & Chen, Jinge & Hu, Ping & Zhu, Xiaocheng & Du, Zhaohui, 2018. "Study of the unsteady aerodynamics of floating wind turbines," Energy, Elsevier, vol. 145(C), pages 793-809.
    3. Wen, Binrong & Dong, Xingjian & Tian, Xinliang & Peng, Zhike & Zhang, Wenming & Wei, Kexiang, 2018. "The power performance of an offshore floating wind turbine in platform pitching motion," Energy, Elsevier, vol. 154(C), pages 508-521.
    4. Gilberto Santo & Mathijs Peeters & Wim Van Paepegem & Joris Degroote, 2020. "Fluid–Structure Interaction Simulations of a Wind Gust Impacting on the Blades of a Large Horizontal Axis Wind Turbine," Energies, MDPI, vol. 13(3), pages 1-20, January.
    5. Guo, Yize & Wang, Xiaodong & Mei, Yuanhang & Ye, Zhaoliang & Guo, Xiaojiang, 2022. "Effect of coupled platform pitch-surge motions on the aerodynamic characters of a horizontal floating offshore wind turbine," Renewable Energy, Elsevier, vol. 196(C), pages 278-297.
    6. Imraan, Mustahib & Sharma, Rajnish N. & Flay, Richard G.J., 2013. "Wind tunnel testing of a wind turbine with telescopic blades: The influence of blade extension," Energy, Elsevier, vol. 53(C), pages 22-32.
    7. Xu, Zongyuan & Gao, Xiaoxia & Zhang, Huanqiang & Lv, Tao & Han, Zhonghe & Zhu, Xiaoxun & Wang, Yu, 2023. "Analysis of the anisotropy aerodynamic characteristics of downstream wind turbine considering the 3D wake expansion based on coupling method," Energy, Elsevier, vol. 263(PD).
    8. Shen, Xin & Chen, Jin-Ge & Zhu, Xiao-Cheng & Liu, Peng-Yin & Du, Zhao-Hui, 2015. "Multi-objective optimization of wind turbine blades using lifting surface method," Energy, Elsevier, vol. 90(P1), pages 1111-1121.
    9. Zhanpu Xue & Hao Zhang & Yunguang Ji, 2023. "Dynamic Response of a Flexible Multi-Body in Large Wind Turbines: A Review," Sustainability, MDPI, vol. 15(8), pages 1-25, April.
    10. Wang, Xinbao & Cai, Chang & Cai, Shang-Gui & Wang, Tengyuan & Wang, Zekun & Song, Juanjuan & Rong, Xiaomin & Li, Qing'an, 2023. "A review of aerodynamic and wake characteristics of floating offshore wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    11. Moradi, Hamed & Vossoughi, Gholamreza, 2015. "Robust control of the variable speed wind turbines in the presence of uncertainties: A comparison between H∞ and PID controllers," Energy, Elsevier, vol. 90(P2), pages 1508-1521.
    12. Cai, Chang & Yang, Yingjian & Jia, Yan & Wu, Guangxing & Zhang, Hairui & Yuan, Feiqi & Qian, Quan & Li, Qing'an, 2023. "Aerodynamic load evaluation of leading edge and trailing edge windward states of large-scale wind turbine blade under parked condition," Applied Energy, Elsevier, vol. 350(C).
    13. Wang, Hao & Wang, Tongguang & Ke, Shitang & Hu, Liang & Xie, Jiaojie & Cai, Xin & Cao, Jiufa & Ren, Yuxin, 2023. "Assessing code-based design wind loads for offshore wind turbines in China against typhoons," Renewable Energy, Elsevier, vol. 212(C), pages 669-682.
    14. He, Ruiyang & Yang, Hongxing & Lu, Lin, 2023. "Optimal yaw strategy and fatigue analysis of wind turbines under the combined effects of wake and yaw control," Applied Energy, Elsevier, vol. 337(C).
    15. Liu, Yuanchuan & Xiao, Qing & Incecik, Atilla & Peyrard, Christophe & Wan, Decheng, 2017. "Establishing a fully coupled CFD analysis tool for floating offshore wind turbines," Renewable Energy, Elsevier, vol. 112(C), pages 280-301.
    16. Wang, Xinbao & Cai, Chang & Wu, Xianyou & Chen, Yewen & Wang, Tengyuan & Zhong, Xiaohui & Li, Qing'an, 2024. "Numerical validation of the dynamic aerodynamic similarity criterion for floating offshore wind turbines under equivalent pitch motions," Energy, Elsevier, vol. 294(C).
    17. Miller, Aaron & Chang, Byungik & Issa, Roy & Chen, Gerald, 2013. "Review of computer-aided numerical simulation in wind energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 122-134.
    18. Jeong, Min-Soo & Kim, Sang-Woo & Lee, In & Yoo, Seung-Jae & Park, K.C., 2013. "The impact of yaw error on aeroelastic characteristics of a horizontal axis wind turbine blade," Renewable Energy, Elsevier, vol. 60(C), pages 256-268.
    19. Pisetta, Gabriele & Le Mestre, Robin & Viola, Ignazio Maria, 2022. "Morphing blades for tidal turbines: A theoretical study," Renewable Energy, Elsevier, vol. 183(C), pages 802-819.
    20. Han, Wanlong & Yan, Peigang & Han, Wanjin & He, Yurong, 2015. "Design of wind turbines with shroud and lobed ejectors for efficient utilization of low-grade wind energy," Energy, Elsevier, vol. 89(C), pages 687-701.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:4:p:1339-:d:748157. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.