IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i14p4991-d858241.html
   My bibliography  Save this article

Two-Phase Volumetric Expanders: A Review of the State-of-the-Art

Author

Listed:
  • Xander van Heule

    (Department of Electromechanical, Systems and Metal Engineering, Ghent University, Sint-Pietersnieuwstraat 41, 9000 Ghent, Belgium)

  • Michel De Paepe

    (Department of Electromechanical, Systems and Metal Engineering, Ghent University, Sint-Pietersnieuwstraat 41, 9000 Ghent, Belgium
    FlandersMake, Gaston Geenslaan 8, 3001 Leuven, Belgium)

  • Steven Lecompte

    (Department of Electromechanical, Systems and Metal Engineering, Ghent University, Sint-Pietersnieuwstraat 41, 9000 Ghent, Belgium
    FlandersMake, Gaston Geenslaan 8, 3001 Leuven, Belgium)

Abstract

Two-phase expansion is the process where a fluid undergoes a pressure drop through or in the liquid–vapor dome. This operation was historically avoided. However, currently it is studied for a multitude of processes. Due to the volume increase in volumetric expanders, a pressure drop occurs in the fluid resulting in flashing phenomena occurring. These phenomena have been studied before in other processes such as two-phase flows or static flash. However, this has not been extensively studied in volumetric expanders and is mostly neglected. Even if data has shown this is not always neglectable depending on the expander type. The thermal non-equilibrium occurring can be modeled on different principles of flashing flows, such as the mixture model, boiling delay model, and homogeneous relaxation model. The main application area in current literature for volumetric two-phase expansion machines, is in low-temperature two-phase heat-to-power cycles. These cycles have shown benefit over classic options if expanders are available with efficiencies in the range of at least 75%. Experimental investigation of expanders in two-phase operation, though lacking in quantity, has shown that this is an achievable goal. However, the know-how to accomplish this requires more studies, both experimentally and in modeling techniques for the different phenomena occurring within these expanders. The present work provides a brief but comprehensive overview of the available experimental data, applicable flashing modeling techniques, and available models of volumetric two-phase expanders.

Suggested Citation

  • Xander van Heule & Michel De Paepe & Steven Lecompte, 2022. "Two-Phase Volumetric Expanders: A Review of the State-of-the-Art," Energies, MDPI, vol. 15(14), pages 1-14, July.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:4991-:d:858241
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/14/4991/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/14/4991/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Lecompte, S. & Huisseune, H. & van den Broek, M. & De Paepe, M., 2015. "Methodical thermodynamic analysis and regression models of organic Rankine cycle architectures for waste heat recovery," Energy, Elsevier, vol. 87(C), pages 60-76.
    2. Narasimhan, Arun Kumar & Wickramaratne, Chatura & Kamal, Rajeev & Goswami, D. Yogi & Singh, Punit, 2019. "Mapping scroll expander performance for organic working fluids using dimensionless parameters in Ns-Ds diagram," Energy, Elsevier, vol. 182(C), pages 739-752.
    3. Steffen, Michael & Löffler, Michael & Schaber, Karlheinz, 2013. "Efficiency of a new Triangle Cycle with flash evaporation in a piston engine," Energy, Elsevier, vol. 57(C), pages 295-307.
    4. Francesconi, Marco & Dori, Edoardo & Antonelli, Marco, 2019. "Analysis of Balje diagrams for a Wankel expander prototype," Applied Energy, Elsevier, vol. 238(C), pages 775-785.
    5. Eyerer, Sebastian & Dawo, Fabian & Rieger, Florian & Schuster, Andreas & Aumann, Richard & Wieland, Christoph & Spliethoff, Hartmut, 2019. "Experimental and numerical investigation of direct liquid injection into an ORC twin-screw expander," Energy, Elsevier, vol. 178(C), pages 867-878.
    6. Giuffrida, Antonio, 2017. "Improving the semi-empirical modelling of a single-screw expander for small organic Rankine cycles," Applied Energy, Elsevier, vol. 193(C), pages 356-368.
    7. Fischer, Johann, 2011. "Comparison of trilateral cycles and organic Rankine cycles," Energy, Elsevier, vol. 36(10), pages 6208-6219.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Krzysztof Rajski & Jan Danielewicz, 2023. "Heat Transfer and Heat Recovery Systems," Energies, MDPI, vol. 16(7), pages 1-6, April.
    2. Daniarta, Sindu & Błasiak, Przemysław & Kolasiński, Piotr & Imre, Attila R., 2024. "Sustainability by means of cold energy utilisation-to-power conversion: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 205(C).
    3. Daniarta, S. & Sowa, D. & Błasiak, P. & Imre, A.R. & Kolasiński, P., 2024. "Techno-economic survey of enhancing Power-to-Methane efficiency via waste heat recovery from electrolysis and biomethanation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 194(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Löffler, Michael, 2017. "Batch Processes in Heat Engines," Energy, Elsevier, vol. 125(C), pages 788-794.
    2. Lecompte, S. & Huisseune, H. & van den Broek, M. & De Paepe, M., 2015. "Methodical thermodynamic analysis and regression models of organic Rankine cycle architectures for waste heat recovery," Energy, Elsevier, vol. 87(C), pages 60-76.
    3. Woodland, Brandon J. & Ziviani, Davide & Braun, James E. & Groll, Eckhard A., 2020. "Considerations on alternative organic Rankine Cycle congurations for low-grade waste heat recovery," Energy, Elsevier, vol. 193(C).
    4. Guillaume Lhermet & Nicolas Tauveron & Nadia Caney & Quentin Blondel & Franck Morin, 2022. "A Recent Advance on Partial Evaporating Organic Rankine Cycle: Experimental Results on an Axial Turbine," Energies, MDPI, vol. 15(20), pages 1-21, October.
    5. Gleinser, Moritz & Wieland, Christoph & Spliethoff, Hartmut, 2018. "Batch evaporation power cycle: Influence of thermal inertia and residence time," Energy, Elsevier, vol. 157(C), pages 1090-1101.
    6. Ge, Zhong & Wang, Hua & Wang, Hui-Tao & Wang, Jian-Jun & Li, Ming & Wu, Fu-Zhong & Zhang, Song-Yuan, 2015. "Main parameters optimization of regenerative organic Rankine cycle driven by low-temperature flue gas waste heat," Energy, Elsevier, vol. 93(P2), pages 1886-1895.
    7. Rijpkema, J. & Munch, K. & Andersson, S.B., 2018. "Thermodynamic potential of twelve working fluids in Rankine and flash cycles for waste heat recovery in heavy duty diesel engines," Energy, Elsevier, vol. 160(C), pages 996-1007.
    8. Dawo, Fabian & Eyerer, Sebastian & Pili, Roberto & Wieland, Christoph & Spliethoff, Hartmut, 2021. "Experimental investigation, model validation and application of twin-screw expanders with different built-in volume ratios," Applied Energy, Elsevier, vol. 282(PA).
    9. Tian, Yafen & Xing, Ziwen & He, Zhilong & Wu, Huagen, 2017. "Modeling and performance analysis of twin-screw steam expander under fluctuating operating conditions in steam pipeline pressure energy recovery applications," Energy, Elsevier, vol. 141(C), pages 692-701.
    10. Li, Guoqiang & Lei, Biao & Wu, Yuting & Zhi, Ruiping & Zhao, Yingkun & Guo, Zhiyu & Liu, Guangyu & Ma, Chongfang, 2018. "Influence of inlet pressure and rotational speed on the performance of high pressure single screw expander prototype," Energy, Elsevier, vol. 147(C), pages 279-285.
    11. Emhardt, Simon & Tian, Guohong & Song, Panpan & Chew, John & Wei, Mingshan, 2022. "CFD analysis of the influence of variable wall thickness on the aerodynamic performance of small scale ORC scroll expanders," Energy, Elsevier, vol. 244(PA).
    12. Guo, Zhiyu & Zhang, Cancan & Wu, Yuting & Lei, Biao & Yan, Dong & Zhi, Ruiping & Shen, Lili, 2020. "Numerical optimization of intake and exhaust structure and experimental verification on single-screw expander for small-scale ORC applications," Energy, Elsevier, vol. 199(C).
    13. Kazuaki Yazawa & Ali Shakouri, 2021. "Heat Flux Based Optimization of Combined Heat and Power Thermoelectric Heat Exchanger," Energies, MDPI, vol. 14(22), pages 1-16, November.
    14. Choi, Byung Chul & Kim, Young Min, 2013. "Thermodynamic analysis of a dual loop heat recovery system with trilateral cycle applied to exhaust gases of internal combustion engine for propulsion of the 6800 TEU container ship," Energy, Elsevier, vol. 58(C), pages 404-416.
    15. Bao, Jianhui & Lei, Jian & Tian, Guohong & Wang, Xiaomeng & Wang, Huaiyu & Shi, Cheng, 2024. "A review of the application development and key technologies of rotary engines under the background of carbon neutrality," Energy, Elsevier, vol. 311(C).
    16. Kisorthman Vimalakanthan & Matthew Read & Ahmed Kovacevic, 2020. "Numerical Modelling and Experimental Validation of Twin-Screw Expanders," Energies, MDPI, vol. 13(18), pages 1-13, September.
    17. Mehr, A.S. & MosayebNezhad, M. & Lanzini, A. & Yari, M. & Mahmoudi, S.M.S. & Santarelli, M., 2018. "Thermodynamic assessment of a novel SOFC based CCHP system in a wastewater treatment plant," Energy, Elsevier, vol. 150(C), pages 299-309.
    18. Joy, Jubil & Kochunni, Sarun Kumar & Chowdhury, Kanchan, 2022. "Size reduction and enhanced power generation in ORC by vaporizing LNG at high supercritical pressure irrespective of delivery pressure," Energy, Elsevier, vol. 260(C).
    19. Sun, Hongchuang & Qin, Jiang & Hung, Tzu-Chen & Lin, Chih-Hung & Lin, Yi-Fan, 2018. "Performance comparison of organic Rankine cycle with expansion from superheated zone or two-phase zone based on temperature utilization rate of heat source," Energy, Elsevier, vol. 149(C), pages 566-576.
    20. Oyewunmi, Oyeniyi A. & Kirmse, Christoph J.W. & Haslam, Andrew J. & Müller, Erich A. & Markides, Christos N., 2017. "Working-fluid selection and performance investigation of a two-phase single-reciprocating-piston heat-conversion engine," Applied Energy, Elsevier, vol. 186(P3), pages 376-395.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:14:p:4991-:d:858241. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.