IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i12p3696-d579062.html
   My bibliography  Save this article

Functional and Operational Requirements to Be Fulfilled by Conical Picks Regarding Their Wear Rate and Investment Costs

Author

Listed:
  • Krzysztof Krauze

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30 Street, 30-059 Kraków, Poland)

  • Kamil Mucha

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30 Street, 30-059 Kraków, Poland)

  • Tomasz Wydro

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30 Street, 30-059 Kraków, Poland)

  • Edward Pieczora

    (KOMAG Institute of Mining Technology, Pszczyńska 37 Street, 44-100 Gliwice, Poland)

Abstract

User’s choices of conical picks currently involve specifying their material and geometric parameters (functional requirements), incorporating the place and conditions of their work (operational requirements). The selection is usually made based on solely one criterion, which is the price. Thus, at the stage of both purchase and operation, the quality of picks, as well as their matching for a specific machine, are not assessed. The problem of defining whether the producer has fulfilled the user’s requirements arises only when the user questions the picks’ quality. Analysis of this problem has resulted in developing assumptions, concepts and research procedures based on the cutting process requirements. The procedure allows conducting tests to determine the geometric parameters of a pick, the type of material of the pick body and WC-Co insert, as well as the pick wear rate (intensity). The C 2 index describes the wear rate (intensity)—the smaller its value, the slower the pick’s wear. Laboratory tests were carried out at the AGH University of Science and Technology in Kraków, Poland. Following the developed method and procedure, the quality of picks was precisely and unambiguously assessed. The C 2 index, apart from testing the quality of picks, was also used to forecast their wear. Based on the C 2 index, a method is proposed to estimate the wear rate of conical picks provided by different manufacturers and determine the acceptable unit price and operating costs. Thus, it is possible and reasonable to precisely define the investment requirements and appropriately select the pick. Relevant tests were carried out for eight different types of conical picks used in roadheaders, longwall shearers and shaft-boring roadheaders.

Suggested Citation

  • Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Edward Pieczora, 2021. "Functional and Operational Requirements to Be Fulfilled by Conical Picks Regarding Their Wear Rate and Investment Costs," Energies, MDPI, vol. 14(12), pages 1-19, June.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:12:p:3696-:d:579062
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/12/3696/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/12/3696/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Piotr Cheluszka, 2020. "Optimization of the Cutting Process Parameters to Ensure High Efficiency of Drilling Tunnels and Use the Technical Potential of the Boom-Type Roadheader," Energies, MDPI, vol. 13(24), pages 1-23, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dawid Szurgacz & Beata Borska & Sergey Zhironkin & Ryszard Diederichs & Anthony J. S. Spearing, 2022. "Optimization of the Load Capacity System of Powered Roof Support: A Review," Energies, MDPI, vol. 15(16), pages 1-15, August.
    2. Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Ryszard Klempka, 2022. "Assessment of the Structure of Cutting Heads with Regard to the Mining Machine Load Using Proprietary Software," Energies, MDPI, vol. 15(19), pages 1-22, September.
    3. Dawid Szurgacz & Beata Borska & Ryszard Diederichs & Anthony J. S. Spearing & Sergey Zhironkin, 2023. "Minimizing Internal Leaks of a Powered Roof Support’s Hydraulic Prop Based on Double Block with Charging," Energies, MDPI, vol. 16(3), pages 1-14, January.
    4. Łukasz Bołoz & Witold Biały, 2022. "Methods and Test Benches for Cutting Tools Testing—A Review," Energies, MDPI, vol. 16(1), pages 1-17, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jarosław Joostberens & Arkadiusz Pawlikowski & Dariusz Prostański & Krzysztof Nieśpiałowski, 2021. "Method for Assessment of Operation of Analog Filters Installed in the Measuring Lines for Electrical Quantities of a Mining Machine’s Converter Power Supply System," Energies, MDPI, vol. 14(9), pages 1-15, April.
    2. Łukasz Bołoz & Witold Biały, 2022. "Methods and Test Benches for Cutting Tools Testing—A Review," Energies, MDPI, vol. 16(1), pages 1-17, December.
    3. Xiaodong Ji & Minjun Zhang & Yuanyuan Qu & Hai Jiang & Miao Wu, 2021. "Travel Dynamics Analysis and Intelligent Path Rectification Planning of a Roadheader on a Roadway," Energies, MDPI, vol. 14(21), pages 1-21, November.
    4. Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Ryszard Klempka, 2022. "Assessment of the Structure of Cutting Heads with Regard to the Mining Machine Load Using Proprietary Software," Energies, MDPI, vol. 15(19), pages 1-22, September.
    5. Piotr Cheluszka & Eryk Remiorz & Jamal Rostami, 2022. "The Use of a Roadheader Simulator in Research of Dynamics and Energy-Consumption of Excavating Underground Roadways and Tunnels," Energies, MDPI, vol. 15(18), pages 1-25, September.
    6. Piotr Cheluszka, 2021. "Numerical Studies of the Dynamics of the Roadheader Equipped with an Automatic Control System during Cutting of Rocks with Different Mechanical Properties," Energies, MDPI, vol. 14(21), pages 1-29, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:12:p:3696-:d:579062. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.