IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2020i1p121-d469538.html
   My bibliography  Save this article

Viability of Various Sources to Ignite A2L Refrigerants

Author

Listed:
  • Dennis K. Kim

    (Department of Fire Protection Engineering, University of Maryland, College Park, MD 20742, USA)

  • Peter B. Sunderland

    (Department of Fire Protection Engineering, University of Maryland, College Park, MD 20742, USA)

Abstract

Environmental considerations are motivating the adoption of low global warming potential refrigerants. Most of these are mildly flammable, i.e., A2L. Their susceptibility to ignition from various ignition sources is poorly understood, particularly for the stoichiometric and quiescent mixtures that are emphasized here. The viability of fifteen residential ignition sources to ignite four A2L refrigerants is considered. Tests are performed in a windowed chamber with a volume of 26 L. The refrigerants are R-32 (difluoromethane); R-452B (67% R-32, 26% R-1234yf, and 7% pentafluoroethane); R-1234yf (2,3,3,3-tetrafluoropropene); and R-1234ze (1,3,3,3-tetrafluoropropene). Two types of ignition sources are confirmed here to be viable: a resistively heated wire at 740 °C and open flames. When the refrigerant concentration was increased slowly, candle flames and butane flames extinguished before initiating any large deflagrations. Eleven other sources were not viable: a smoldering cigarette, a butane lighter, friction sparks, a plug and receptacle, a light switch, a hand mixer, a cordless drill, a bread toaster, a hair dryer, a hot plate, and a space heater. The difficulty to ignite these refrigerants in air is attributed to their long quenching distances (up to 25 mm). Under some conditions the refrigerants were observed to act as flame suppressants.

Suggested Citation

  • Dennis K. Kim & Peter B. Sunderland, 2020. "Viability of Various Sources to Ignite A2L Refrigerants," Energies, MDPI, vol. 14(1), pages 1-10, December.
    • Handle: RePEc:gam:jeners:v:14:y:2020:i:1:p:121-:d:469538
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/1/121/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/1/121/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Feng, Biao & Yang, Zhao & Zhai, Rui, 2018. "Experimental study on the influence of the flame retardants on the flammability of R1234yf," Energy, Elsevier, vol. 143(C), pages 212-218.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Zhen & Luo, Jielin & Zou, Dexin & Yang, Kaiyin & Wang, Qin & Chen, Guangming, 2023. "Experimental investigation on the inhibition of flame retardants on the flammability of R1234ze(E)," Energy, Elsevier, vol. 263(PE).
    2. Xin, Liyong & Liu, Chao & Tan, Luxi & Xu, Xiaoxiao & Li, Qibin & Huo, Erguang & Sun, Kuan, 2021. "Thermal stability and pyrolysis products of HFO-1234yf as an environment-friendly working fluid for Organic Rankine Cycle," Energy, Elsevier, vol. 228(C).
    3. Kumma, Nagarjuna & Kruthiventi, S.S Harish, 2024. "Current status of refrigerants used in domestic applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    4. Xin, Liyong & Yu, Wei & Liu, Chao & Liu, Lang & Wang, Shukun & Li, Xiaoxiao & Liu, Yu, 2023. "Thermal stability of a mixed working fluid (R513A) for organic Rankine cycle," Energy, Elsevier, vol. 263(PF).
    5. Chen, Yubo & Yang, Zhao & Zhang, Yong & He, Hongxia & Li, Jie, 2023. "Combustion and interaction mechanism of 2,3,3,3-tetrafluoropropene/1,1,1,2-tetrafluoroethane as an environmentally friendly mixed working fluid," Energy, Elsevier, vol. 284(C).
    6. Mota-Babiloni, Adrián & Belman-Flores, J.M. & Makhnatch, Pavel & Navarro-Esbrí, Joaquín & Barroso-Maldonado, J.M., 2018. "Experimental exergy analysis of R513A to replace R134a in a small capacity refrigeration system," Energy, Elsevier, vol. 162(C), pages 99-110.
    7. Bartosz Gil & Jacek Kasperski, 2018. "Efficiency Evaluation of the Ejector Cooling Cycle using a New Generation of HFO/HCFO Refrigerant as a R134a Replacement," Energies, MDPI, vol. 11(8), pages 1-17, August.
    8. Kutub Uddin & Bidyut Baran Saha, 2022. "An Overview of Environment-Friendly Refrigerants for Domestic Air Conditioning Applications," Energies, MDPI, vol. 15(21), pages 1-24, October.
    9. Zhai, Rui & Yang, Zhao & Chen, Yubo & Feng, Biao & Lv, Zijian & Zhao, Wenzhong, 2019. "Theoretical and experimental studies on the combustion mechanism of Trans-1, 3, 3, 3-tetrafluoroprop-1-ene," Energy, Elsevier, vol. 189(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2020:i:1:p:121-:d:469538. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.