IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i24p6717-d465142.html
   My bibliography  Save this article

Real-Time Monitoring of the Thermal Effect for the Redox Flow Battery by an Infrared Thermal Imaging Technology

Author

Listed:
  • Shu-Ling Huang

    (Program in Materials and Chemical Engineering, National United University, Miaoli 36063, Taiwan
    Department of Chemical Engineering, National United University, Miaoli 36063, Taiwan)

  • Chi-Ping Li

    (Department of Chemical Engineering, National United University, Miaoli 36063, Taiwan)

  • Chia-Chin Chang

    (Department of Chemical Engineering, National United University, Miaoli 36063, Taiwan)

  • Chen-Chen Tseng

    (Department of Chemical Engineering, National United University, Miaoli 36063, Taiwan)

  • Ming-Wei Wang

    (Department of Chemical Engineering, National United University, Miaoli 36063, Taiwan)

  • Mei-Ling Chen

    (Department of Electrical Engineering, National United University, Miaoli 36063, Taiwan)

Abstract

In this study, a new monitoring method was developed, titled infrared thermal imaging technology, which can effectively evaluate the thermal effect of the charge-discharge test in the vanadium/iodine redox flow battery (V/I RFB). The results show that the all-vanadium redox flow battery (all-V RFB) has a greater molar reaction Gibbs free energy change than that of the V/I RFB, representing a large thermal effect of the all-V RFB than the V/I RFB. The charge-discharge parameters, flow rate and current density, are important factors for inducing the thermal effect, because of the concentration polarization and the ohmic resistor. The new membrane (HS-SO 3 H) shows a high ion exchange capacity and a good ions crossover inhibitory for the V/I RFB system, and has a high coulomb efficiency that reaches 96%. The voltage efficiency was enhanced from 61% to 86% using the C-TiO 2 -Pd composite electrode as a cathode with the serpentine-type flow field for the V/I RFB. By adopting the high-resolution images of an infrared thermal imaging technology with the function of the temperature profile data, it is useful to evaluate the key components’ performance of the V/I RFB, and is a favorable candidate in the developing of the redox flow battery system.

Suggested Citation

  • Shu-Ling Huang & Chi-Ping Li & Chia-Chin Chang & Chen-Chen Tseng & Ming-Wei Wang & Mei-Ling Chen, 2020. "Real-Time Monitoring of the Thermal Effect for the Redox Flow Battery by an Infrared Thermal Imaging Technology," Energies, MDPI, vol. 13(24), pages 1-19, December.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6717-:d:465142
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/24/6717/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/24/6717/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wei, Zhongbao & Zhao, Jiyun & Xiong, Binyu, 2014. "Dynamic electro-thermal modeling of all-vanadium redox flow battery with forced cooling strategies," Applied Energy, Elsevier, vol. 135(C), pages 1-10.
    2. Guarnieri, Massimo & Trovò, Andrea & Picano, Francesco, 2020. "Enhancing the efficiency of kW-class vanadium redox flow batteries by flow factor modulation: An experimental method," Applied Energy, Elsevier, vol. 262(C).
    3. Zheng, Qiong & Zhang, Huamin & Xing, Feng & Ma, Xiangkun & Li, Xianfeng & Ning, Guiling, 2014. "A three-dimensional model for thermal analysis in a vanadium flow battery," Applied Energy, Elsevier, vol. 113(C), pages 1675-1685.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yin, Cong & Guo, Shaoyun & Fang, Honglin & Liu, Jiayi & Li, Yang & Tang, Hao, 2015. "Numerical and experimental studies of stack shunt current for vanadium redox flow battery," Applied Energy, Elsevier, vol. 151(C), pages 237-248.
    2. Zhou, X.L. & Zhao, T.S. & An, L. & Zeng, Y.K. & Yan, X.H., 2015. "A vanadium redox flow battery model incorporating the effect of ion concentrations on ion mobility," Applied Energy, Elsevier, vol. 158(C), pages 157-166.
    3. Wang, Tao & Fu, Jiahui & Zheng, Menglian & Yu, Zitao, 2018. "Dynamic control strategy for the electrolyte flow rate of vanadium redox flow batteries," Applied Energy, Elsevier, vol. 227(C), pages 613-623.
    4. He, Qijiao & Li, Zheng & Zhao, Dongqi & Yu, Jie & Tan, Peng & Guo, Meiting & Liao, Tianjun & Zhao, Tianshou & Ni, Meng, 2023. "A 3D modelling study on all vanadium redox flow battery at various operating temperatures," Energy, Elsevier, vol. 282(C).
    5. Wei, Zhongbao & Zhao, Jiyun & Ji, Dongxu & Tseng, King Jet, 2017. "A multi-timescale estimator for battery state of charge and capacity dual estimation based on an online identified model," Applied Energy, Elsevier, vol. 204(C), pages 1264-1274.
    6. Wei, Zhongbao & Lim, Tuti Mariana & Skyllas-Kazacos, Maria & Wai, Nyunt & Tseng, King Jet, 2016. "Online state of charge and model parameter co-estimation based on a novel multi-timescale estimator for vanadium redox flow battery," Applied Energy, Elsevier, vol. 172(C), pages 169-179.
    7. Ivan Kuzmin & Alexey Loskutov & Evgeny Osetrov & Andrey Kurkin, 2022. "Source for Autonomous Power Supply System Based on Flow Battery," Energies, MDPI, vol. 15(9), pages 1-15, April.
    8. Zichen, Wang & Changqing, Du, 2021. "A comprehensive review on thermal management systems for power lithium-ion batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    9. Yue, Meng & Lv, Zhiqiang & Zheng, Qiong & Li, Xianfeng & Zhang, Huamin, 2019. "Battery assembly optimization: Tailoring the electrode compression ratio based on the polarization analysis in vanadium flow batteries," Applied Energy, Elsevier, vol. 235(C), pages 495-508.
    10. Mohamed, M.R. & Leung, P.K. & Sulaiman, M.H., 2015. "Performance characterization of a vanadium redox flow battery at different operating parameters under a standardized test-bed system," Applied Energy, Elsevier, vol. 137(C), pages 402-412.
    11. Wang, Q. & Qu, Z.G. & Jiang, Z.Y. & Yang, W.W., 2018. "Experimental study on the performance of a vanadium redox flow battery with non-uniformly compressed carbon felt electrode," Applied Energy, Elsevier, vol. 213(C), pages 293-305.
    12. Joseph Oyekale & Mario Petrollese & Vittorio Tola & Giorgio Cau, 2020. "Impacts of Renewable Energy Resources on Effectiveness of Grid-Integrated Systems: Succinct Review of Current Challenges and Potential Solution Strategies," Energies, MDPI, vol. 13(18), pages 1-48, September.
    13. Lv, Youfu & Yang, Xiaoqing & Li, Xinxi & Zhang, Guoqing & Wang, Ziyuan & Yang, Chengzhao, 2016. "Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins," Applied Energy, Elsevier, vol. 178(C), pages 376-382.
    14. Chou, Yi-Sin & Hsu, Ning-Yih & Jeng, King-Tsai & Chen, Kuan-Hsiang & Yen, Shi-Chern, 2016. "A novel ultrasonic velocity sensing approach to monitoring state of charge of vanadium redox flow battery," Applied Energy, Elsevier, vol. 182(C), pages 253-259.
    15. Zeng, Yikai & Li, Fenghao & Lu, Fei & Zhou, Xuelong & Yuan, Yanping & Cao, Xiaoling & Xiang, Bo, 2019. "A hierarchical interdigitated flow field design for scale-up of high-performance redox flow batteries," Applied Energy, Elsevier, vol. 238(C), pages 435-441.
    16. Wu, Maochun & Liu, Mingyao & Long, Guifa & Wan, Kai & Liang, Zhenxing & Zhao, Tim S., 2014. "A novel high-energy-density positive electrolyte with multiple redox couples for redox flow batteries," Applied Energy, Elsevier, vol. 136(C), pages 576-581.
    17. Wei, Zhongbao & Zhao, Jiyun & Xiong, Binyu, 2014. "Dynamic electro-thermal modeling of all-vanadium redox flow battery with forced cooling strategies," Applied Energy, Elsevier, vol. 135(C), pages 1-10.
    18. Wei, Zhongbao & Meng, Shujuan & Xiong, Binyu & Ji, Dongxu & Tseng, King Jet, 2016. "Enhanced online model identification and state of charge estimation for lithium-ion battery with a FBCRLS based observer," Applied Energy, Elsevier, vol. 181(C), pages 332-341.
    19. Wu, Chunxia & Sun, Yalong & Tang, Heng & Zhang, Shiwei & Yuan, Wei & Zhu, Likuan & Tang, Yong, 2024. "A review on the liquid cooling thermal management system of lithium-ion batteries," Applied Energy, Elsevier, vol. 375(C).
    20. Liu, Rui & Chen, Jixin & Xun, Jingzhi & Jiao, Kui & Du, Qing, 2014. "Numerical investigation of thermal behaviors in lithium-ion battery stack discharge," Applied Energy, Elsevier, vol. 132(C), pages 288-297.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6717-:d:465142. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.