IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i24p6692-d464339.html
   My bibliography  Save this article

Power Generation Prediction of an Open Cycle Gas Turbine Using Kalman Filter

Author

Listed:
  • Christos Manasis

    (Energy Systems Laboratory, National and Kapodistrian University of Athens, 34400 Psachna Evia, Greece)

  • Nicholas Assimakis

    (Energy Systems Laboratory, National and Kapodistrian University of Athens, 34400 Psachna Evia, Greece)

  • Vasilis Vikias

    (Energy Systems Laboratory, National and Kapodistrian University of Athens, 34400 Psachna Evia, Greece)

  • Aphrodite Ktena

    (Energy Systems Laboratory, National and Kapodistrian University of Athens, 34400 Psachna Evia, Greece)

  • Tassos Stamatelos

    (Thermodynamics and Thermal Engines Laboratory, Department of Mechanical Engineering, University of Thessaly, 38334 Volos, Greece)

Abstract

The motivation for this paper is the enhanced role of power generation prediction in power plants and power systems in the smart grid paradigm. The proposed approach addresses the impact of the ambient temperature on the performance of an open cycle gas turbine when using the Kalman Filter (KF) technique and the power-temperature (P-T) characteristic of the turbine. Several Kalman Filtering techniques are tested to obtain improved temperature forecasts, which are then used to obtain output power predictions. A typical P-T curve of an open-cycle gas turbine is used to demonstrate the applicability of the proposed method. Nonlinear and linear discrete process models are studied. Extended Kalman Filters are proposed for the nonlinear model. The Time Varying, Time Invariant, and Steady State Kalman Filters are used with the linearized model. Simulation results show that the power generation prediction obtained using the Extended Kalman Filter with the piecewise linear model yields improved forecasts. The linear formulations, though less accurate, are a promising option when a power generation forecast for a small-term and short-term time window is required.

Suggested Citation

  • Christos Manasis & Nicholas Assimakis & Vasilis Vikias & Aphrodite Ktena & Tassos Stamatelos, 2020. "Power Generation Prediction of an Open Cycle Gas Turbine Using Kalman Filter," Energies, MDPI, vol. 13(24), pages 1-15, December.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6692-:d:464339
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/24/6692/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/24/6692/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. González-Díaz, Abigail & Alcaráz-Calderón, Agustín M. & González-Díaz, Maria Ortencia & Méndez-Aranda, Ángel & Lucquiaud, Mathieu & González-Santaló, Jose Miguel, 2017. "Effect of the ambient conditions on gas turbine combined cycle power plants with post-combustion CO2 capture," Energy, Elsevier, vol. 134(C), pages 221-233.
    2. Angelos Angelopoulos & Aphrodite Ktena & Christos Manasis & Stamatis Voliotis, 2019. "Impact of a Periodic Power Source on a RES Microgrid," Energies, MDPI, vol. 12(10), pages 1-15, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Joanna Kajewska-Szkudlarek & Jan Bylicki & Justyna Stańczyk & Paweł Licznar, 2021. "Neural Approach in Short-Term Outdoor Temperature Prediction for Application in HVAC Systems," Energies, MDPI, vol. 14(22), pages 1-15, November.
    2. Konstantin Zadiran & Maxim Shcherbakov, 2023. "New Method of Degradation Process Identification for Reliability-Centered Maintenance of Energy Equipment," Energies, MDPI, vol. 16(2), pages 1-21, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Maheshwari, Mayank & Singh, Onkar, 2020. "Thermo-economic analysis of combined cycle configurations with intercooling and reheating," Energy, Elsevier, vol. 205(C).
    2. Cheng, Xianda & Zheng, Haoran & Dong, Wei & Yang, Xuesen, 2023. "Performance prediction of marine intercooled cycle gas turbine based on expanded similarity parameters," Energy, Elsevier, vol. 265(C).
    3. Jiang, L. & Gonzalez-Diaz, A. & Ling-Chin, J. & Roskilly, A.P. & Smallbone, A.J., 2019. "Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption," Applied Energy, Elsevier, vol. 245(C), pages 1-15.
    4. Zhang, Yuanzhe & Liu, Pei & Li, Zheng, 2023. "Gas turbine off-design behavior modelling and operation windows analysis under different ambient conditions," Energy, Elsevier, vol. 262(PA).
    5. Wu, Zhicong & Xu, Gang & Ge, Shiyu & Yang, Zhenjun & Xue, Xiaojun & Chen, Heng, 2024. "An efficient methanol pre-reforming gas turbine combined cycle with integration of mid-temperature energy upgradation and CO2 recovery: Thermodynamic and economic analysis," Applied Energy, Elsevier, vol. 358(C).
    6. Yuichiro Yoshida & Hooman Farzaneh, 2020. "Optimal Design of a Stand-Alone Residential Hybrid Microgrid System for Enhancing Renewable Energy Deployment in Japan," Energies, MDPI, vol. 13(7), pages 1-18, April.
    7. Shankar Ganesh Pariasamy & Vinod Kumar Venkiteswaran & Jeyanandan Kumar & Mohamed M. Awad, 2022. "Industrial CHP with Steam Systems: A Review of Recent Case Studies, Trends and Relevance to Malaysian Industry," Energies, MDPI, vol. 15(20), pages 1-15, October.
    8. Díaz-Herrera, Pablo R. & Alcaraz-Calderón, Agustín M. & González-Díaz, Maria Ortencia & González-Díaz, Abigail, 2020. "Capture level design for a natural gas combined cycle with post-combustion CO2 capture using novel configurations," Energy, Elsevier, vol. 193(C).
    9. Rajvikram Madurai Elavarasan & Aritra Ghosh & Tapas K. Mallick & Apoorva Krishnamurthy & Meenal Saravanan, 2019. "Investigations on Performance Enhancement Measures of the Bidirectional Converter in PV–Wind Interconnected Microgrid System," Energies, MDPI, vol. 12(14), pages 1-22, July.
    10. George Stamatellos & Olympia Zogou & Anastassios Stamatelos, 2022. "Energy Analysis of a NZEB Office Building with Rooftop PV Installation: Exploitation of the Employees’ Electric Vehicles Battery Storage," Energies, MDPI, vol. 15(17), pages 1-24, August.
    11. Abdin, I.F. & Fang, Y.-P. & Zio, E., 2019. "A modeling and optimization framework for power systems design with operational flexibility and resilience against extreme heat waves and drought events," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 706-719.
    12. George Stamatellos & Tassos Stamatelos, 2023. "Study of an nZEB Office Building with Storage in Electric Vehicle Batteries and Dispatch of a Natural Gas-Fuelled Generator," Energies, MDPI, vol. 16(7), pages 1-20, April.
    13. Kazemi, Abolghasem & Moreno, Jovita & Iribarren, Diego, 2022. "Techno-economic comparison of optimized natural gas combined cycle power plants with CO2 capture," Energy, Elsevier, vol. 255(C).
    14. Barakat, Elsayed & Jin, Tai & Wang, Gaofeng, 2023. "Performance analysis of selective exhaust gas recirculation integrated with fogging cooling system for gas turbine power plants," Energy, Elsevier, vol. 263(PC).
    15. George Stamatellos & Olympia Zogou & Anastassios Stamatelos, 2021. "Energy Performance Optimization of a House with Grid-Connected Rooftop PV Installation and Air Source Heat Pump," Energies, MDPI, vol. 14(3), pages 1-23, January.
    16. Meng, Measrainsey & Sanders, Kelly T., 2019. "A data-driven approach to investigate the impact of air temperature on the efficiencies of coal and natural gas generators," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    17. Apan-Ortiz, Jorge Igor & Sanchez-Fernández, Eva & González-Díaz, Abigail, 2018. "Use of steam jet booster as an integration strategy to operate a natural gas combined cycle with post-combustion CO2 capture at part-load," Energy, Elsevier, vol. 165(PB), pages 126-139.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6692-:d:464339. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.