IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i23p4432-d289631.html
   My bibliography  Save this article

Investigation of Burn Duration and NO Emission in Lean Mixture with CNG and Gasoline

Author

Listed:
  • Hüseyin Emre Doğan

    (Graduate School of Science, Engineering and Technology, Istanbul Technical University, Istanbul 34469, Turkey)

  • Osman Akın Kutlar

    (Faculty of Mechanical Engineering, Istanbul Technical University, Istanbul 34437, Turkey)

  • Majid Javadzadehkalkhoran

    (Graduate School of Science, Engineering and Technology, Istanbul Technical University, Istanbul 34469, Turkey)

  • Abdurrahman Demirci

    (Mechanical Engineering Department, Karamanoğlu Mehmetbey University, Karaman 70200, Turkey)

Abstract

The results of experiments performed by gasoline and natural gas fuels in a single cylinder research engine were evaluated in this study. The main objective of this study is to compare exhaust gas emissions, efficiency, and burn durations for both fuels in stoichiometric and lean mixture. At the same time, cycle to cycle variation in these operating conditions should not exceed an acceptable value. In the ultra-lean mixture, gasoline fuel exceeded this determined limit before Compressed Natural Gas (CNG). Therefore, the reduction in NO was restricted by cyclic variations. In combustion analysis, although the burn duration of the gasoline in stoichiometric conditions was shorter than CNG, this situation reversed in favor of CNG in the ultra-lean mixtures. Contrary to some studies in the literature, the spark advance and ignition delay for CNG were the same or shorter than gasoline in this study. The primary reasons for this change are the high compression ratio and the different combustion chamber geometry. The increase in turbulence intensity has different effects on CNG and gasoline. As a result, it has been observed that NO emissions can meet the limits without a loss of efficiency for this engine operated with CNG under the ultra-lean mixture.

Suggested Citation

  • Hüseyin Emre Doğan & Osman Akın Kutlar & Majid Javadzadehkalkhoran & Abdurrahman Demirci, 2019. "Investigation of Burn Duration and NO Emission in Lean Mixture with CNG and Gasoline," Energies, MDPI, vol. 12(23), pages 1-18, November.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:23:p:4432-:d:289631
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/23/4432/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/23/4432/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Liu, Jinlong & Dumitrescu, Cosmin E., 2018. "Flame development analysis in a diesel optical engine converted to spark ignition natural gas operation," Applied Energy, Elsevier, vol. 230(C), pages 1205-1217.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Denghao Zhu & Jun Deng & Jinqiu Wang & Shuo Wang & Hongyu Zhang & Jakob Andert & Liguang Li, 2020. "Development and Application of Ion Current/Cylinder Pressure Cooperative Combustion Diagnosis and Control System," Energies, MDPI, vol. 13(21), pages 1-21, October.
    2. Al-Harbi, Ahmed A. & Alabduly, Abdullah J. & Alkhedhair, Abdullah M. & Alqahtani, Naif B. & Albishi, Miqad S., 2022. "Effect of operation under lean conditions on NOx emissions and fuel consumption fueling an SI engine with hydrous ethanol–gasoline blends enhanced with synthesis gas," Energy, Elsevier, vol. 238(PA).
    3. Michał Głogowski & Przemysław Kubiak & Szymon Szufa & Piotr Piersa & Łukasz Adrian & Mateusz Krukowski, 2021. "The Use of the Fourier Series to Analyze the Shaping of Thermodynamic Processes in Heat Engines," Energies, MDPI, vol. 14(8), pages 1-23, April.
    4. Wojciech Kamela & Marcin K. Wojs & Piotr Orliński, 2022. "Calculation Method for Assessing the Storage Capacity of Nitrogen Compounds in LNT Reactors," Energies, MDPI, vol. 15(20), pages 1-9, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Biao Li & Pengfei Wang & Peng Sun & Rui Meng & Jun Zeng & Guanghui Liu, 2023. "A Model for Determining the Optimal Decommissioning Interval of Energy Equipment Based on the Whole Life Cycle Cost," Sustainability, MDPI, vol. 15(6), pages 1-28, March.
    2. Ghaderi Masouleh, M. & Keskinen, K. & Kaario, O. & Kahila, H. & Karimkashi, S. & Vuorinen, V., 2019. "Modeling cycle-to-cycle variations in spark ignited combustion engines by scale-resolving simulations for different engine speeds," Applied Energy, Elsevier, vol. 250(C), pages 801-820.
    3. Huang, Shuai & Li, Tie & Zhang, Zhifei & Ma, Pengfei, 2019. "Rotational and vibrational temperatures in the spark plasma by various discharge energies and strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    4. Duan, Xiongbo & Xu, Zhengxin & Sun, Xingyu & Deng, Banglin & Liu, Jingping, 2021. "Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone–butanol–ethanol/diesel blend fuels," Energy, Elsevier, vol. 231(C).
    5. Hegazy Rezk & Mohammad Ali Abdelkareem & Samah Ibrahim Alshathri & Enas Taha Sayed & Mohamad Ramadan & Abdul Ghani Olabi, 2023. "Fuel Economy Energy Management of Electric Vehicles Using Harris Hawks Optimization," Sustainability, MDPI, vol. 15(16), pages 1-15, August.
    6. Schröder, Lukas & Hillenbrand, Thomas & Brüggemann, Dieter, 2024. "Evaluation of the combustion process of directly injected methane in a rapid compression machine with a laser-based ignition system and an electrical ignition system," Energy, Elsevier, vol. 289(C).
    7. Lee, Chia-fon & Pang, Yuxin & Wu, Han & Nithyanandan, Karthik & Liu, Fushui, 2020. "An optical investigation of substitution rates on natural gas/diesel dual-fuel combustion in a diesel engine," Applied Energy, Elsevier, vol. 261(C).
    8. Liu, Jinlong & Dumitrescu, Cosmin E., 2019. "Single and double Wiebe function combustion model for a heavy-duty diesel engine retrofitted to natural-gas spark-ignition," Applied Energy, Elsevier, vol. 248(C), pages 95-103.
    9. Divekar, Prasad & Han, Xiaoye & Zhang, Xiaoxi & Zheng, Ming & Tjong, Jimi, 2023. "Energy efficiency improvements and CO2 emission reduction by CNG use in medium- and heavy-duty spark-ignition engines," Energy, Elsevier, vol. 263(PB).
    10. Yin, Zibin & Cai, Wenwei & Zhang, Zhuo & Deng, Zijin & Li, Zhiyong, 2022. "Effects of hydrogen-rich products from methanol steam reforming on the performance enhancement of a medium-speed marine engine," Energy, Elsevier, vol. 256(C).
    11. Duan, Xiongbo & Zhang, Shiheng & Liu, Yiqun & Li, Yangtang & Liu, Jingping & Lai, Ming-Chia & Deng, Banglin, 2020. "Numerical investigation the effects of the twin-spark plugs coupled with EGR on the combustion process and emissions characteristics in a lean burn natural gas SI engine," Energy, Elsevier, vol. 206(C).
    12. Vivek Pandey & Kiran Hanmanthrao Shahapurkar & Suresh Guluwadi & Getinet Asrat Mengesha & Bekele Gadissa & Nagaraj Ramalingayya Banapurmath & Chandramouli Vadlamudi & Sanjay Krishnappa & T. M. Yunus K, 2023. "Studies on the Performance of Engines Powered with Hydrogen-Enriched Biogas," Energies, MDPI, vol. 16(11), pages 1-13, May.
    13. Yanyan Zhang & Ziyuan Ma & Yan Feng & Ziyu Diao & Zhentao Liu, 2021. "The Effects of Ultra-Low Viscosity Engine Oil on Mechanical Efficiency and Fuel Economy," Energies, MDPI, vol. 14(8), pages 1-20, April.
    14. Xu, Zheng & Ji, Fenzhu & Ding, Shuiting & Zhao, Yunhai & Zhang, Xiangbo & Zhou, Yu & Zhang, Qi & Du, Farong, 2020. "High-altitude performance and improvement methods of poppet valves 2-stroke aircraft diesel engine," Applied Energy, Elsevier, vol. 276(C).
    15. Jie Pan & Junfang Ma & Junyin Li & Hongzhe Liu & Jing Wei & Jingjing Xu & Tao Zhu & Hairui Zhang & Wei Li & Jiaying Pan, 2022. "Influence of Intake Port Structure on the Performance of a Spark-Ignited Natural Gas Engine," Energies, MDPI, vol. 15(22), pages 1-13, November.
    16. Qiao, Junhao & Liu, Jingping & Liang, Jichao & Jia, Dongdong & Wang, Rumin & Shen, Dazi & Duan, Xiongbo, 2023. "Experimental investigation the effects of Miller cycle coupled with asynchronous intake valves on cycle-to-cycle variations and performance of the SI engine," Energy, Elsevier, vol. 263(PD).
    17. Wei, Haiqiao & Zhang, Ren & Chen, Lin & Pan, Jiaying & Wang, Xuan, 2021. "Effects of high ignition energy on lean combustion characteristics of natural gas using an optical engine with a high compression ratio," Energy, Elsevier, vol. 223(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:23:p:4432-:d:289631. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.