IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i15p2984-d254168.html
   My bibliography  Save this article

Oil-Cooling Method of the Permanent Magnet Synchronous Motor for Electric Vehicle

Author

Listed:
  • Fulai Guo

    (National Engineering Laboratory for Electric Vehicles, Beijing Institute of Technology, No. 5 South Zhongguancun Street, Haidian District, Beijing 100081, China)

  • Chengning Zhang

    (National Engineering Laboratory for Electric Vehicles, Beijing Institute of Technology, No. 5 South Zhongguancun Street, Haidian District, Beijing 100081, China)

Abstract

The typical motor has poor heat dissipation conditions that are limited by the installation space and working environment, and the high operation temperature increase has been a bottleneck to improve the power density and torque density. The inner rotor motor is considered to be the research object, and an oil-cooling structure for end winding and stator core is proposed. The heat inside the motor is mainly carried away through the lubricating oil in the form of heat conduction and convection heat transfer. The 3d motor model was built using the ANSYS software. The temperature field of the motor was simulated to analyze the temperature distribution inside the motor under rated and peak working conditions. The low-speed high-torque test and one-hour temperature-rise test of the motor prototype were performed on a bench built in the laboratory. The comparison between the test results with water-cooled motor shows that the temperature-rise rate of oil-cooled motor with the same electromagnetic structure is slower than that of water-jacketed cooled motor, and the temperature difference between the front and back of the motor decreases by 18 °C in half an hour. The oil-cooled method has a good cooling effect on the stator core and works for longer time under rated conditions.

Suggested Citation

  • Fulai Guo & Chengning Zhang, 2019. "Oil-Cooling Method of the Permanent Magnet Synchronous Motor for Electric Vehicle," Energies, MDPI, vol. 12(15), pages 1-11, August.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:15:p:2984-:d:254168
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/15/2984/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/15/2984/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hao Yan & Yongxiang Xu & Jibin Zou, 2016. "A Phase Current Reconstruction Approach for Three-Phase Permanent-Magnet Synchronous Motor Drive," Energies, MDPI, vol. 9(10), pages 1-16, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Junjie Zhao & Bin Zhang & Xiaoli Fu & Shenglin Yan, 2021. "Numerical Study on the Influence of Vortex Generator Arrangement on Heat Transfer Enhancement of Oil-Cooled Motor," Energies, MDPI, vol. 14(21), pages 1-17, October.
    2. Gaurav Kumar Pandey & Siddharth Sriram Sikha & Abhineet Thakur & Sai Sravan Yarlagadda & Sai Santosh Thatikonda & Bibin Baiju suja & Arkadiusz Mystkowski & Egidijus Dragašius & Edison Gundabattini, 2023. "Thermal Mapping and Heat Transfer Analysis of an Induction Motor of an Electric Vehicle Using Nanofluids as a Cooling Medium," Sustainability, MDPI, vol. 15(10), pages 1-18, May.
    3. Said Bentouba & Nadjet Zioui & Peter Breuhaus & Mahmoud Bourouis, 2023. "Overview of the Potential of Energy Harvesting Sources in Electric Vehicles," Energies, MDPI, vol. 16(13), pages 1-22, July.
    4. Edison Gundabattini & Arkadiusz Mystkowski & Adam Idzkowski & Raja Singh R. & Darius Gnanaraj Solomon, 2021. "Thermal Mapping of a High-Speed Electric Motor Used for Traction Applications and Analysis of Various Cooling Methods—A Review," Energies, MDPI, vol. 14(5), pages 1-32, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Guan-Ren Chen & Shih-Chin Yang & Yu-Liang Hsu & Kang Li, 2017. "Position and Speed Estimation of Permanent Magnet Machine Sensorless Drive at High Speed Using an Improved Phase-Locked Loop," Energies, MDPI, vol. 10(10), pages 1-17, October.
    2. Yiguang Chen & Bo Zhang, 2017. "Minimization of the Electromagnetic Torque Ripple Caused by the Coils Inter-Turn Short Circuit Fault in Dual-Redundancy Permanent Magnet Synchronous Motors," Energies, MDPI, vol. 10(11), pages 1-23, November.
    3. Qinyue Zhu & Zhaoyang Li & Xitang Tan & Dabo Xie & Wei Dai, 2019. "Sensors Fault Diagnosis and Active Fault-Tolerant Control for PMSM Drive Systems Based on a Composite Sliding Mode Observer," Energies, MDPI, vol. 12(9), pages 1-20, May.
    4. Zhen Tian & Chengning Zhang & Shuo Zhang, 2017. "Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines," Energies, MDPI, vol. 10(3), pages 1-12, March.
    5. Seok-Kyoon Kim, 2017. "Proportional-Type Performance Recovery DC-Link Voltage Tracking Algorithm for Permanent Magnet Synchronous Generators," Energies, MDPI, vol. 10(9), pages 1-17, September.
    6. Yiguang Chen & Xuemin Chen & Yonghuan Shen, 2018. "On-Line Detection of Coil Inter-Turn Short Circuit Faults in Dual-Redundancy Permanent Magnet Synchronous Motors," Energies, MDPI, vol. 11(3), pages 1-31, March.
    7. Chang-Hwan Park & Dong-Youn Kim & Han-Beom Yeom & Yung-Deug Son & Jang-Mok Kim, 2019. "A Current Reconstruction Strategy Following the Operation Area in a 1-Shunt Inverter System," Energies, MDPI, vol. 12(8), pages 1-16, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:15:p:2984-:d:254168. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.