IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i13p2623-d246582.html
   My bibliography  Save this article

Concentrated Photovoltaic/Thermal Hybrid System Coupled with a Thermoelectric Generator

Author

Listed:
  • Abdelrahman Lashin

    (Physics Department, College of Applied Science, Umm Al Qura University, Makkah 21955, Saudi Arabia
    Physics Department, Faculty of Science, Mansoura University, Mansoura 35516, Egypt)

  • Mohammad Al Turkestani

    (Physics Department, College of Applied Science, Umm Al Qura University, Makkah 21955, Saudi Arabia)

  • Mohamed Sabry

    (Physics Department, College of Applied Science, Umm Al Qura University, Makkah 21955, Saudi Arabia
    Solar Physics Lab, National Research Institute of Astronomy and Geophysics, Cairo 11421, Egypt)

Abstract

Concentrator photovoltaic (CPV) systems have displayed an important cost reduction and in the next few years could offer a competitive cost advantage compared to that of flat plate PV systems. Such CPV systems require some cooling methods to overcome high operating temperatures, which reduces their efficiency significantly. On the other hand, thermoelectric generators (TEG) are devices that convert thermal energy directly to electrical energy, provided that there is a temperature difference between its two faces. A hybrid concentrator photovoltaic/thermal (CPV/T) system is proposed in this work. Such a system uses TEG in a two-fold manner: to passively cool down the CPV cell in order to maintain its power conversion efficiency in such high temperature conditions, and to use the accumulated thermal energy to generate electrical energy, which is added to the system’s total power output. Two types of solar cells were investigated, namely, Ga 0.35 In 0.65 P/Ga 0.83 In 0.17 As with efficiency an of 28% at 250X, and a Laser Grooved Buried Contact (LGBC) silicon concentrator PV cell with an efficiency of 18.3% at 40X. These cells are assumed to be coupled with two TEGs of the same type but with a different number of junctions. Experimental results showed that coupling TEG modules to a CPV system could be a useful method for enhancing the overall output power, provided that PV cells are chosen with a low efficiency temperature coefficient and high PV performance. Also, TEG modules have to be chosen with a high figure of merit. Moreover, the operating optical concentration ratio, as well as the covered area of the TEG, have to be optimized in order to maximize the total system output.

Suggested Citation

  • Abdelrahman Lashin & Mohammad Al Turkestani & Mohamed Sabry, 2019. "Concentrated Photovoltaic/Thermal Hybrid System Coupled with a Thermoelectric Generator," Energies, MDPI, vol. 12(13), pages 1-12, July.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:13:p:2623-:d:246582
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/13/2623/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/13/2623/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hsu, Cheng-Ting & Huang, Gia-Yeh & Chu, Hsu-Shen & Yu, Ben & Yao, Da-Jeng, 2011. "Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators," Applied Energy, Elsevier, vol. 88(4), pages 1291-1297, April.
    2. Saim Memon & Khawaja Noman Tahir, 2018. "Experimental and Analytical Simulation Analyses on the Electrical Performance of Thermoelectric Generator Modules for Direct and Concentrated Quartz-Halogen Heat Harvesting," Energies, MDPI, vol. 11(12), pages 1-17, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Karolina Papis-Frączek & Krzysztof Sornek, 2022. "A Review on Heat Extraction Devices for CPVT Systems with Active Liquid Cooling," Energies, MDPI, vol. 15(17), pages 1-49, August.
    2. Mohamed Sabry & Abdelrahman Lashin, 2023. "Performance of a Heat-Pipe Cooled Concentrated Photovoltaic/Thermoelectric Hybrid System," Energies, MDPI, vol. 16(3), pages 1-13, February.
    3. Abdelrahman Lashin & Mohammad Al Turkestani & Mohamed Sabry, 2020. "Performance of a Thermoelectric Generator Partially Illuminated with Highly Concentrated Light," Energies, MDPI, vol. 13(14), pages 1-12, July.
    4. Qi, Ji & Wang, Xuejian & Yang, Decao & Li, Gongping, 2024. "Feasibility study on radioisotope-powered thermophotovoltaic/thermoelectric hybrid power generation system used in deep-sea: From design to experiment," Applied Energy, Elsevier, vol. 358(C).
    5. Petru Adrian Cotfas & Daniel Tudor Cotfas, 2020. "Comprehensive Review of Methods and Instruments for Photovoltaic–Thermoelectric Generator Hybrid System Characterization," Energies, MDPI, vol. 13(22), pages 1-32, November.
    6. Irene Cappelli & Stefano Parrino & Alessandro Pozzebon & Alessio Salta, 2021. "Providing Energy Self-Sufficiency to LoRaWAN Nodes by Means of Thermoelectric Generators (TEGs)-Based Energy Harvesting," Energies, MDPI, vol. 14(21), pages 1-17, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kossyvakis, D.N. & Vossou, C.G. & Provatidis, C.G. & Hristoforou, E.V., 2015. "Computational and experimental analysis of a commercially available Seebeck module," Renewable Energy, Elsevier, vol. 74(C), pages 1-10.
    2. Zhang, Xin & Cai, Ling & Liao, Tianjun & Zhou, Yinghui & Zhao, Yingru & Chen, Jincan, 2018. "Exploiting the waste heat from an alkaline fuel cell via electrochemical cycles," Energy, Elsevier, vol. 142(C), pages 983-990.
    3. Aljaghtham, Mutabe & Celik, Emrah, 2020. "Design optimization of oil pan thermoelectric generator to recover waste heat from internal combustion engines," Energy, Elsevier, vol. 200(C).
    4. Yang, Yurong & Wang, Shixue & Zhu, Yu, 2020. "Evaluation method for assessing heat transfer enhancement effect on performance improvement of thermoelectric generator systems," Applied Energy, Elsevier, vol. 263(C).
    5. Shen, Rong & Gou, Xiaolong & Xu, Haoyu & Qiu, Kuanrong, 2017. "Dynamic performance analysis of a cascaded thermoelectric generator," Applied Energy, Elsevier, vol. 203(C), pages 808-815.
    6. Zaher, M.H. & Abdelsalam, M.Y. & Cotton, J.S., 2020. "Study of the effects of axial conduction on the performance of thermoelectric generators integrated in a heat exchanger for waste heat recovery applications," Applied Energy, Elsevier, vol. 261(C).
    7. Kisha, Wigdan & Riley, Paul & McKechnie, Jon & Hann, David, 2021. "Asymmetrically heated multi-stage travelling-wave thermoacoustic electricity generator," Energy, Elsevier, vol. 235(C).
    8. Ding, L.C. & Akbarzadeh, A. & Date, Abhijit, 2016. "Electric power generation via plate type power generation unit from solar pond using thermoelectric cells," Applied Energy, Elsevier, vol. 183(C), pages 61-76.
    9. Lee, HoSung, 2013. "Optimal design of thermoelectric devices with dimensional analysis," Applied Energy, Elsevier, vol. 106(C), pages 79-88.
    10. Fanciulli, C. & Abedi, H. & Merotto, L. & Dondè, R. & De Iuliis, S. & Passaretti, F., 2018. "Portable thermoelectric power generation based on catalytic combustor for low power electronic equipment," Applied Energy, Elsevier, vol. 215(C), pages 300-308.
    11. Attia, Peter M. & Lewis, Matthew R. & Bomberger, Cory C. & Prasad, Ajay K. & Zide, Joshua M.O., 2013. "Experimental studies of thermoelectric power generation in dynamic temperature environments," Energy, Elsevier, vol. 60(C), pages 453-456.
    12. Tan, Ming & Deng, Yuan & Hao, Yanming, 2014. "Synergistic effect between ordered Bi2Te2.7Se0.3 pillar array and layered Ag electrode for remarkably enhancing thermoelectric device performance," Energy, Elsevier, vol. 77(C), pages 591-596.
    13. Shun Kondo & Mana Kameyama & Kentaro Imaoka & Yoko Shimoi & Fabrice Mathevet & Takashi Fujihara & Hiroshi Goto & Hajime Nakanotani & Masayuki Yahiro & Chihaya Adachi, 2024. "Organic thermoelectric device utilizing charge transfer interface as the charge generation by harvesting thermal energy," Nature Communications, Nature, vol. 15(1), pages 1-8, December.
    14. Chen, Leisheng & Lee, Jaeyoung, 2015. "Effect of pulsed heat power on the thermal and electrical performances of a thermoelectric generator," Applied Energy, Elsevier, vol. 150(C), pages 138-149.
    15. Zhao, Xiaohuan & Jiang, Jiang & Zuo, Hongyan & Mao, Zhengsong, 2023. "Performance analysis of diesel particulate filter thermoelectric conversion mobile energy storage system under engine conditions of low-speed and light-load," Energy, Elsevier, vol. 282(C).
    16. Zou, Wen-Jiang & Shen, Kun-Yang & Jung, Seunghun & Kim, Young-Bae, 2021. "Application of thermoelectric devices in performance optimization of a domestic PEMFC-based CHP system," Energy, Elsevier, vol. 229(C).
    17. Pablo Donoso-García & Luis Henríquez-Vargas & Esteban Huerta, 2022. "Waste Heat Recovery from Air Using Porous Media and Conversion to Electricity," Energies, MDPI, vol. 15(15), pages 1-17, August.
    18. Jinlong Chen & Kewen Li & Changwei Liu & Mao Li & Youchang Lv & Lin Jia & Shanshan Jiang, 2017. "Enhanced Efficiency of Thermoelectric Generator by Optimizing Mechanical and Electrical Structures," Energies, MDPI, vol. 10(9), pages 1-15, September.
    19. Saidur, R. & Rezaei, M. & Muzammil, W.K. & Hassan, M.H. & Paria, S. & Hasanuzzaman, M., 2012. "Technologies to recover exhaust heat from internal combustion engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5649-5659.
    20. Wang, Ruochen & Yu, Wei & Meng, Xiangpeng, 2018. "Performance investigation and energy optimization of a thermoelectric generator for a mild hybrid vehicle," Energy, Elsevier, vol. 162(C), pages 1016-1028.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:13:p:2623-:d:246582. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.