IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i12p2373-d241513.html
   My bibliography  Save this article

Thermal Assessment of a Novel Drywall System Insulated with VIPs

Author

Listed:
  • Ioannis Atsonios

    (Lab. of Heterogeneous Mixtures and Combustion Systems, School of Mechanical Engineering, National Technical University of Athens, Heroon Polytechniou 9, 15780 Zografou, Greece)

  • Ioannis Mandilaras

    (Lab. of Heterogeneous Mixtures and Combustion Systems, School of Mechanical Engineering, National Technical University of Athens, Heroon Polytechniou 9, 15780 Zografou, Greece)

  • Maria Founti

    (Lab. of Heterogeneous Mixtures and Combustion Systems, School of Mechanical Engineering, National Technical University of Athens, Heroon Polytechniou 9, 15780 Zografou, Greece)

Abstract

Advanced building envelopes targeting high energy performance should combine high thermal performance with easy and fast installation. The combination of lightweight steel-framed building systems with vacuum insulation panels (VIPs) form an attractive solution toward this requirement. In the present study, a lightweight metal frame drywall building insulated with VIPs is constructed and experimentally/theoretically investigated, focusing on the impact of every type of thermal bridges on the thermal performance of the envelope and its upgrade due to the presence of the VIPs at the walls. Temperature measurements obtained at several locations of the envelope, over a period of one year, are presented and analyzed. The results are in agreement with the theoretical values and demonstrate that the VIPs can reduce the thermal transmittance of the central part of the wall by ca. 50%, limiting the impact of metal studs. The paper discusses the impact of dimensional inaccuracies and damaged panels on the thermal performance of the envelope. It is shown that VIP decreases the impact of thermal bridges and reduces the risk of condensation inside the walls.

Suggested Citation

  • Ioannis Atsonios & Ioannis Mandilaras & Maria Founti, 2019. "Thermal Assessment of a Novel Drywall System Insulated with VIPs," Energies, MDPI, vol. 12(12), pages 1-18, June.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:12:p:2373-:d:241513
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/12/2373/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/12/2373/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Baldinelli, Giorgio & Bianchi, Francesco & Rotili, Antonella & Costarelli, Danilo & Seracini, Marco & Vinti, Gianluca & Asdrubali, Francesco & Evangelisti, Luca, 2018. "A model for the improvement of thermal bridges quantitative assessment by infrared thermography," Applied Energy, Elsevier, vol. 211(C), pages 854-864.
    2. Alam, M. & Singh, H. & Suresh, S. & Redpath, D.A.G., 2017. "Energy and economic analysis of Vacuum Insulation Panels (VIPs) used in non-domestic buildings," Applied Energy, Elsevier, vol. 188(C), pages 1-8.
    3. Asdrubali, Francesco & Baldinelli, Giorgio & Bianchi, Francesco, 2012. "A quantitative methodology to evaluate thermal bridges in buildings," Applied Energy, Elsevier, vol. 97(C), pages 365-373.
    4. Soares, N. & Santos, P. & Gervásio, H. & Costa, J.J. & Simões da Silva, L., 2017. "Energy efficiency and thermal performance of lightweight steel-framed (LSF) construction: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 194-209.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Eduardo Roque & Romeu Vicente & Ricardo M. S. F. Almeida, 2021. "Indoor Thermal Environment Challenges of Light Steel Framing in the Southern European Context," Energies, MDPI, vol. 14(21), pages 1-23, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mingqian Guo & Yue Wu & Xinran Miao, 2023. "Thermal Bridges Monitoring and Energy Optimization of Rural Residences in China’s Cold Regions," Sustainability, MDPI, vol. 15(14), pages 1-25, July.
    2. Martin, Miguel & Chong, Adrian & Biljecki, Filip & Miller, Clayton, 2022. "Infrared thermography in the built environment: A multi-scale review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    3. Garrido, I. & Lagüela, S. & Otero, R. & Arias, P., 2020. "Thermographic methodologies used in infrastructure inspection: A review—Post-processing procedures," Applied Energy, Elsevier, vol. 266(C).
    4. Kylili, Angeliki & Fokaides, Paris A. & Christou, Petros & Kalogirou, Soteris A., 2014. "Infrared thermography (IRT) applications for building diagnostics: A review," Applied Energy, Elsevier, vol. 134(C), pages 531-549.
    5. Tiziana Basiricò & Antonio Cottone & Daniele Enea, 2020. "Analytical Mathematical Modeling of the Thermal Bridge between Reinforced Concrete Wall and Inter-Floor Slab," Sustainability, MDPI, vol. 12(23), pages 1-21, November.
    6. Dehwah, Ammar H.A. & Krarti, Moncef, 2021. "Energy performance of integrated adaptive envelope systems for residential buildings," Energy, Elsevier, vol. 233(C).
    7. Blanca Tejedor & Eva Barreira & Vasco Peixoto de Freitas & Tomasz Kisilewicz & Katarzyna Nowak-Dzieszko & Umberto Berardi, 2020. "Impact of Stationary and Dynamic Conditions on the U-Value Measurements of Heavy-Multi Leaf Walls by Quantitative IRT," Energies, MDPI, vol. 13(24), pages 1-19, December.
    8. D'Alessandro, Antonella & Pisello, Anna Laura & Fabiani, Claudia & Ubertini, Filippo & Cabeza, Luisa F. & Cotana, Franco, 2018. "Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation," Applied Energy, Elsevier, vol. 212(C), pages 1448-1461.
    9. Moss, R.W. & Henshall, P. & Arya, F. & Shire, G.S.F. & Hyde, T. & Eames, P.C., 2018. "Performance and operational effectiveness of evacuated flat plate solar collectors compared with conventional thermal, PVT and PV panels," Applied Energy, Elsevier, vol. 216(C), pages 588-601.
    10. Danilo Costarelli & Michele Piconi & Gianluca Vinti, 2023. "On the convergence properties of sampling Durrmeyer‐type operators in Orlicz spaces," Mathematische Nachrichten, Wiley Blackwell, vol. 296(2), pages 588-609, February.
    11. David Bienvenido-Huertas & Juan Antonio Fernández Quiñones & Juan Moyano & Carlos E. Rodríguez-Jiménez, 2018. "Patents Analysis of Thermal Bridges in Slab Fronts and Their Effect on Energy Demand," Energies, MDPI, vol. 11(9), pages 1-18, August.
    12. Yu, Sisi & Liu, Yanfeng & Wang, Dengjia & Bahaj, AbuBakr S. & Wu, Yue & Liu, Jiaping, 2021. "Review of thermal and environmental performance of prefabricated buildings: Implications to emission reductions in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    13. Asdrubali, Francesco & Baldinelli, Giorgio & Bianchi, Francesco & Costarelli, Danilo & Rotili, Antonella & Seracini, Marco & Vinti, Gianluca, 2018. "Detection of thermal bridges from thermographic images by means of image processing approximation algorithms," Applied Mathematics and Computation, Elsevier, vol. 317(C), pages 160-171.
    14. Capozzoli, Alfonso & Gorrino, Alice & Corrado, Vincenzo, 2013. "A building thermal bridges sensitivity analysis," Applied Energy, Elsevier, vol. 107(C), pages 229-243.
    15. Gonçalves, Márcio & Simões, Nuno & Serra, Catarina & Flores-Colen, Inês, 2020. "A review of the challenges posed by the use of vacuum panels in external insulation finishing systems," Applied Energy, Elsevier, vol. 257(C).
    16. Paulo Santos & Keerthan Poologanathan, 2021. "The Importance of Stud Flanges Size and Shape on the Thermal Performance of Lightweight Steel Framed Walls," Sustainability, MDPI, vol. 13(7), pages 1-22, April.
    17. Elaouzy, Y. & El Fadar, A., 2022. "Energy, economic and environmental benefits of integrating passive design strategies into buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    18. Paulo Santos & Paulo Lopes & David Abrantes, 2022. "Thermal Performance of Load-Bearing, Lightweight, Steel-Framed Partition Walls Using Thermal Break Strips: A Parametric Study," Energies, MDPI, vol. 15(24), pages 1-16, December.
    19. Paulo Santos & Telmo Ribeiro, 2021. "Thermal Performance Improvement of Double-Pane Lightweight Steel Framed Walls Using Thermal Break Strips and Reflective Foils," Energies, MDPI, vol. 14(21), pages 1-16, October.
    20. Ling-Chin, J. & Taylor, W. & Davidson, P. & Reay, D. & Nazi, W.I. & Tassou, S. & Roskilly, A.P., 2019. "UK building thermal performance from industrial and governmental perspectives," Applied Energy, Elsevier, vol. 237(C), pages 270-282.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:12:p:2373-:d:241513. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.