IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i24p9271-d995914.html
   My bibliography  Save this article

Thermal Performance of Load-Bearing, Lightweight, Steel-Framed Partition Walls Using Thermal Break Strips: A Parametric Study

Author

Listed:
  • Paulo Santos

    (ISISE, Department of Civil Engineering, University of Coimbra, 3030-788 Coimbra, Portugal)

  • Paulo Lopes

    (ISISE, Department of Civil Engineering, University of Coimbra, 3030-788 Coimbra, Portugal)

  • David Abrantes

    (ISISE, Department of Civil Engineering, University of Coimbra, 3030-788 Coimbra, Portugal)

Abstract

Thermal bridges are a very relevant issue for lightweight steel-framed (LSF) construction systems given the high thermal conductivity of steel, which can negatively compromise their thermal behaviour, reduce their durability, and decrease the building energy efficiency. Several thermal bridge mitigation strategies exist, including the attachment of thermal break strips (TBS) to the steel studs’ flanges as one of the most widely employed techniques. In this research, the relevance of TBS to the thermal performance improvement of load-bearing LSF partition walls was assessed by performing a parametric study, making use of a validated 2D numerical model. A sensitivity analysis was performed for five different key parameters, and their importance was evaluated. The assessed parameters included the number of TBS and their thickness, width, and thermal conductivity, as well as the vertical steel stud spacing. We found that these parameters were all relevant. Moreover, regardless of the TBS thermal conductivity, it is always worth increasing their thickness. However, the increase in the TBS width does not always lead to increased thermal resistance; a thermal performance reduction was noted when increasing the width of the TBS at higher thermal conductivities. Therefore, it was concluded that it is more efficient to increase TBS thickness than their width.

Suggested Citation

  • Paulo Santos & Paulo Lopes & David Abrantes, 2022. "Thermal Performance of Load-Bearing, Lightweight, Steel-Framed Partition Walls Using Thermal Break Strips: A Parametric Study," Energies, MDPI, vol. 15(24), pages 1-16, December.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9271-:d:995914
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/24/9271/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/24/9271/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Paulo Santos & Keerthan Poologanathan, 2021. "The Importance of Stud Flanges Size and Shape on the Thermal Performance of Lightweight Steel Framed Walls," Sustainability, MDPI, vol. 13(7), pages 1-22, April.
    2. Soares, N. & Santos, P. & Gervásio, H. & Costa, J.J. & Simões da Silva, L., 2017. "Energy efficiency and thermal performance of lightweight steel-framed (LSF) construction: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 194-209.
    3. Paulo Santos & Gabriela Lemes & Diogo Mateus, 2020. "Analytical Methods to Estimate the Thermal Transmittance of LSF Walls: Calculation Procedures Review and Accuracy Comparison," Energies, MDPI, vol. 13(4), pages 1-27, February.
    4. Paulo Santos & Gabriela Lemes & Diogo Mateus, 2019. "Thermal Transmittance of Internal Partition and External Facade LSF Walls: A Parametric Study," Energies, MDPI, vol. 12(14), pages 1-20, July.
    5. Al-Sanea, Sami A. & Zedan, M.F., 2012. "Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions," Applied Energy, Elsevier, vol. 98(C), pages 584-593.
    6. Paulo Santos & Diogo Mateus & Daniel Ferrandez & Amparo Verdu, 2022. "Numerical Simulation and Experimental Validation of Thermal Break Strips’ Improvement in Facade LSF Walls," Energies, MDPI, vol. 15(21), pages 1-18, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Paulo Santos & Keerthan Poologanathan, 2021. "The Importance of Stud Flanges Size and Shape on the Thermal Performance of Lightweight Steel Framed Walls," Sustainability, MDPI, vol. 13(7), pages 1-22, April.
    2. Paulo Santos & Paulo Lopes & David Abrantes, 2023. "Thermal Performance of Lightweight Steel Framed Facade Walls Using Thermal Break Strips and ETICS: A Parametric Study," Energies, MDPI, vol. 16(4), pages 1-16, February.
    3. Paulo Santos & Telmo Ribeiro, 2021. "Thermal Performance Improvement of Double-Pane Lightweight Steel Framed Walls Using Thermal Break Strips and Reflective Foils," Energies, MDPI, vol. 14(21), pages 1-16, October.
    4. Victor Lohmann & Paulo Santos, 2020. "Trombe Wall Thermal Behavior and Energy Efficiency of a Light Steel Frame Compartment: Experimental and Numerical Assessments," Energies, MDPI, vol. 13(11), pages 1-25, May.
    5. Paulo Santos & Diogo Mateus & Daniel Ferrandez & Amparo Verdu, 2022. "Numerical Simulation and Experimental Validation of Thermal Break Strips’ Improvement in Facade LSF Walls," Energies, MDPI, vol. 15(21), pages 1-18, November.
    6. Domagoj Tkalčić & Bojan Milovanović & Mergim Gaši & Marija Jelčić Rukavina & Ivana Banjad Pečur, 2023. "Optimization of Thermal Bridges Effect of Composite Lightweight Panels with Integrated Steel Load-Bearing Structure," Energies, MDPI, vol. 16(18), pages 1-24, September.
    7. Paulo Santos & Gabriela Lemes & Diogo Mateus, 2020. "Analytical Methods to Estimate the Thermal Transmittance of LSF Walls: Calculation Procedures Review and Accuracy Comparison," Energies, MDPI, vol. 13(4), pages 1-27, February.
    8. Marzieh Mohammadi & Tesfaalem Gereziher Atsbha & Yuxiang Chen, 2025. "Comparison and Design of Dry-Stack Blocks with High Thermal Resistance for Exterior Walls of Sustainable Buildings in Cold Climates," Sustainability, MDPI, vol. 17(4), pages 1-20, February.
    9. Yu, Sisi & Liu, Yanfeng & Wang, Dengjia & Bahaj, AbuBakr S. & Wu, Yue & Liu, Jiaping, 2021. "Review of thermal and environmental performance of prefabricated buildings: Implications to emission reductions in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    10. Kheira Anissa Tabet Aoul & Rahma Hagi & Rahma Abdelghani & Monaya Syam & Boshra Akhozheya, 2021. "Building Envelope Thermal Defects in Existing and Under-Construction Housing in the UAE; Infrared Thermography Diagnosis and Qualitative Impacts Analysis," Sustainability, MDPI, vol. 13(4), pages 1-23, February.
    11. Berger, Julien & Mendes, Nathan, 2017. "An innovative method for the design of high energy performance building envelopes," Applied Energy, Elsevier, vol. 190(C), pages 266-277.
    12. Baldinelli, G. & Bianchi, F., 2014. "Windows thermal resistance: Infrared thermography aided comparative analysis among finite volumes simulations and experimental methods," Applied Energy, Elsevier, vol. 136(C), pages 250-258.
    13. Rafael Suárez & Rocío Escandón & Ramón López-Pérez & Ángel Luis León-Rodríguez & Tillmann Klein & Sacha Silvester, 2018. "Impact of Climate Change: Environmental Assessment of Passive Solutions in a Single-Family Home in Southern Spain," Sustainability, MDPI, vol. 10(8), pages 1-17, August.
    14. Ornella Iuorio & Andrew Wallace & Kate Simpson, 2019. "Prefabs in the North of England: Technological, Environmental and Social Innovations," Sustainability, MDPI, vol. 11(14), pages 1-14, July.
    15. Mingqian Guo & Yue Wu & Xinran Miao, 2023. "Thermal Bridges Monitoring and Energy Optimization of Rural Residences in China’s Cold Regions," Sustainability, MDPI, vol. 15(14), pages 1-25, July.
    16. Aïssani, A. & Chateauneuf, A. & Fontaine, J.-P. & Audebert, Ph., 2016. "Quantification of workmanship insulation defects and their impact on the thermal performance of building facades," Applied Energy, Elsevier, vol. 165(C), pages 272-284.
    17. Baglivo, Cristina & Congedo, Paolo Maria, 2015. "Design method of high performance precast external walls for warm climate by multi-objective optimization analysis," Energy, Elsevier, vol. 90(P2), pages 1645-1661.
    18. Ibrahim, Mohamad & Biwole, Pascal Henry & Wurtz, Etienne & Achard, Patrick, 2014. "Limiting windows offset thermal bridge losses using a new insulating coating," Applied Energy, Elsevier, vol. 123(C), pages 220-231.
    19. Przemysław Miąsik & Joanna Krasoń, 2021. "Thermal Efficiency of Trombe Wall in the South Facade of a Frame Building," Energies, MDPI, vol. 14(3), pages 1-23, January.
    20. Mohamed F. Zedan & Sami Al-Sanea & Abdulaziz Al-Mujahid & Zeyad Al-Suhaibani, 2016. "Effect of Thermal Bridges in Insulated Walls on Air-Conditioning Loads Using Whole Building Energy Analysis," Sustainability, MDPI, vol. 8(6), pages 1-20, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9271-:d:995914. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.