IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i11p2142-d237132.html
   My bibliography  Save this article

Comprehensive Electric Arc Furnace Electric Energy Consumption Modeling: A Pilot Study

Author

Listed:
  • Miha Kovačič

    (Štore Steel Ltd., Železarska cesta 3, SI-3220 Štore, Slovenia
    Faculty of Mechanical Engineering, University in Ljubljana, Aškerčeva 6, SI-1000 Ljubljana, Slovenia)

  • Klemen Stopar

    (Štore Steel Ltd., Železarska cesta 3, SI-3220 Štore, Slovenia)

  • Robert Vertnik

    (Štore Steel Ltd., Železarska cesta 3, SI-3220 Štore, Slovenia
    Faculty of Mechanical Engineering, University in Ljubljana, Aškerčeva 6, SI-1000 Ljubljana, Slovenia)

  • Božidar Šarler

    (Faculty of Mechanical Engineering, University in Ljubljana, Aškerčeva 6, SI-1000 Ljubljana, Slovenia
    Institute of Metals and Technology, Lepi pot 11, SI-1000 Ljubljana, Slovenia)

Abstract

The electric arc furnace operation at the Štore Steel company, one of the largest flat spring steel producers in Europe, consists of charging, melting, refining the chemical composition, adjusting the temperature, and tapping. Knowledge of the consumed energy within the individual electric arc operation steps is essential. The electric energy consumption during melting and refining was analyzed including the maintenance and technological delays. In modeling the electric energy consumption, 25 parameters were considered during melting (e.g., coke, dolomite, quantity), refining and tapping (e.g., injected oxygen, carbon, and limestone quantity) that were selected from 3248 consecutively produced batches in 2018. Two approaches were employed for the data analysis: linear regression and genetic programming model. The linear regression model was used in the first randomly generated generations of each of the 100 independent developed civilizations. More accurate models were subsequently obtained during the simulated evolution. The average relative deviation of the linear regression and the genetic programming model predictions from the experimental data were 3.60% and 3.31%, respectively. Both models were subsequently validated by using data from 278 batches produced in 2019, where the maintenance and the technological delays were below 20 minutes per batch. It was possible, based on the linear regression and the genetically developed model, to calculate that the average electric energy consumption could be reduced by up to 1.04% and 1.16%, respectively, in the case of maintenance and other technological delays.

Suggested Citation

  • Miha Kovačič & Klemen Stopar & Robert Vertnik & Božidar Šarler, 2019. "Comprehensive Electric Arc Furnace Electric Energy Consumption Modeling: A Pilot Study," Energies, MDPI, vol. 12(11), pages 1-13, June.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:11:p:2142-:d:237132
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/11/2142/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/11/2142/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hocine, Labar & Yacine, Djeghader & Kamel, Bounaya & Samira, Kelaiaia Mounia, 2009. "Improvement of electrical arc furnace operation with an appropriate model," Energy, Elsevier, vol. 34(9), pages 1207-1214.
    2. Kovačič, Miha & Šarler, Božidar, 2014. "Genetic programming prediction of the natural gas consumption in a steel plant," Energy, Elsevier, vol. 66(C), pages 273-284.
    3. Oda, Junichiro & Akimoto, Keigo & Tomoda, Toshimasa & Nagashima, Miyuki & Wada, Kenichi & Sano, Fuminori, 2012. "International comparisons of energy efficiency in power, steel, and cement industries," Energy Policy, Elsevier, vol. 44(C), pages 118-129.
    4. Gajic, Dragoljub & Savic-Gajic, Ivana & Savic, Ivan & Georgieva, Olga & Di Gennaro, Stefano, 2016. "Modelling of electrical energy consumption in an electric arc furnace using artificial neural networks," Energy, Elsevier, vol. 108(C), pages 132-139.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yu-Chiao Lu & Liviu Brabie & Andrey V. Karasev & Chuan Wang, 2022. "Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 2: Carburization of Liquid Iron by Addition of Iron–Carbon Briquettes," Sustainability, MDPI, vol. 14(9), pages 1-20, April.
    2. Manojlović, Vaso & Kamberović, Željko & Korać, Marija & Dotlić, Milan, 2022. "Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters," Applied Energy, Elsevier, vol. 307(C).
    3. So-Won Choi & Bo-Guk Seo & Eul-Bum Lee, 2023. "Machine Learning-Based Tap Temperature Prediction and Control for Optimized Power Consumption in Stainless Electric Arc Furnaces (EAF) of Steel Plants," Sustainability, MDPI, vol. 15(8), pages 1-31, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Raul Garcia-Segura & Javier Vázquez Castillo & Fernando Martell-Chavez & Omar Longoria-Gandara & Jaime Ortegón Aguilar, 2017. "Electric Arc Furnace Modeling with Artificial Neural Networks and Arc Length with Variable Voltage Gradient," Energies, MDPI, vol. 10(9), pages 1-11, September.
    2. Manojlović, Vaso & Kamberović, Željko & Korać, Marija & Dotlić, Milan, 2022. "Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters," Applied Energy, Elsevier, vol. 307(C).
    3. Bernard Baron & Tomasz Kraszewski & Dariusz Kusiak & Tomasz Szczegielniak & Zygmunt Piątek, 2023. "The Synthesis of a Bifilar Short Electric Network for a Submerged Arc Furnace with Delta-Connected Electrodes," Energies, MDPI, vol. 16(21), pages 1-21, October.
    4. Yuo-Hsien Shiau & Su-Fen Yang & Rishan Adha & Syamsiyatul Muzayyanah, 2022. "Modeling Industrial Energy Demand in Relation to Subsector Manufacturing Output and Climate Change: Artificial Neural Network Insights," Sustainability, MDPI, vol. 14(5), pages 1-18, March.
    5. Jianlei Lang & Shuiyuan Cheng & Ying Zhou & Beibei Zhao & Haiyan Wang & Shujing Zhang, 2013. "Energy and Environmental Implications of Hybrid and Electric Vehicles in China," Energies, MDPI, vol. 6(5), pages 1-23, May.
    6. Zbigniew Łukasik & Zbigniew Olczykowski, 2020. "Estimating the Impact of Arc Furnaces on the Quality of Power in Supply Systems," Energies, MDPI, vol. 13(6), pages 1-30, March.
    7. Flues, Florens & Rübbelke, Dirk & Vögele, Stefan, 2013. "Energy Efficiency and Industrial Output: The Case of the Iron and Steel Industry," Energy: Resources and Markets 162379, Fondazione Eni Enrico Mattei (FEEM).
    8. Mathieu, Valentin & Roda, Jean-Marc, 2023. "A meta-analysis on wood trade flow modeling concepts," Forest Policy and Economics, Elsevier, vol. 149(C).
    9. Fernández, David & Pozo, Carlos & Folgado, Rubén & Jiménez, Laureano & Guillén-Gosálbez, Gonzalo, 2018. "Productivity and energy efficiency assessment of existing industrial gases facilities via data envelopment analysis and the Malmquist index," Applied Energy, Elsevier, vol. 212(C), pages 1563-1577.
    10. Samet, Haidar & Ghanbari, Teymoor & Ghaisari, Jafar, 2014. "Maximizing the transferred power to electric arc furnace for having maximum production," Energy, Elsevier, vol. 72(C), pages 752-759.
    11. Askari, S. & Montazerin, N. & Zarandi, M.H. Fazel, 2015. "Forecasting semi-dynamic response of natural gas networks to nodal gas consumptions using genetic fuzzy systems," Energy, Elsevier, vol. 83(C), pages 252-266.
    12. Szoplik, Jolanta, 2015. "Forecasting of natural gas consumption with artificial neural networks," Energy, Elsevier, vol. 85(C), pages 208-220.
    13. Chun-Cheng Lin & Rou-Xuan He & Wan-Yu Liu, 2018. "Considering Multiple Factors to Forecast CO 2 Emissions: A Hybrid Multivariable Grey Forecasting and Genetic Programming Approach," Energies, MDPI, vol. 11(12), pages 1-25, December.
    14. Chen, Zhengjie & Ma, Wenhui & Wu, Jijun & Wei, Kuixian & Yang, Xi & Lv, Guoqiang & Xie, Keqiang & Yu, Jie, 2016. "Influence of carbothermic reduction on submerged arc furnace energy efficiency during silicon production," Energy, Elsevier, vol. 116(P1), pages 687-693.
    15. Tian, Sicong & Li, Kaimin & Jiang, Jianguo & Chen, Xuejing & Yan, Feng, 2016. "CO2 abatement from the iron and steel industry using a combined Ca–Fe chemical loop," Applied Energy, Elsevier, vol. 170(C), pages 345-352.
    16. Guo, Yani & Zheng, Haixia & Zeng, Yun & Fan, Wei & Albahooth, Bayan & Bhuiyan, Rubaiyat Ahsan, 2023. "Natural resources extraction of RCEP trade bloc: Examining geopolitical risk and economic situation," Resources Policy, Elsevier, vol. 86(PB).
    17. Jin-Wei Wang & Hua Liao & Bao-Jun Tang & Ruo-Yu Ke & Yi-Ming Wei, 2017. "Is the CO2 Emissions Reduction from Scale Change, Structural Change or Technology Change? Evidence from Non-metallic Sector of 11 Major Economies in 1995-2009," CEEP-BIT Working Papers 101, Center for Energy and Environmental Policy Research (CEEP), Beijing Institute of Technology.
    18. Reza Hafezi & Amir Naser Akhavan & Mazdak Zamani & Saeed Pakseresht & Shahaboddin Shamshirband, 2019. "Developing a Data Mining Based Model to Extract Predictor Factors in Energy Systems: Application of Global Natural Gas Demand," Energies, MDPI, vol. 12(21), pages 1-22, October.
    19. Sano, Fuminori & Wada, Kenichi & Akimoto, Keigo & Oda, Junichiro, 2015. "Assessments of GHG emission reduction scenarios of different levels and different short-term pledges through macro- and sectoral decomposition analyses," Technological Forecasting and Social Change, Elsevier, vol. 90(PA), pages 153-165.
    20. Izadyar, Nima & Ghadamian, Hossein & Ong, Hwai Chyuan & moghadam, Zeinab & Tong, Chong Wen & Shamshirband, Shahaboddin, 2015. "Appraisal of the support vector machine to forecast residential heating demand for the District Heating System based on the monthly overall natural gas consumption," Energy, Elsevier, vol. 93(P2), pages 1558-1567.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:11:p:2142-:d:237132. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.