IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v11y2018i9p2393-d169110.html
   My bibliography  Save this article

Enhancing the Stability of Invert Emulsion Drilling Fluid for Drilling in High-Pressure High-Temperature Conditions

Author

Listed:
  • Salaheldin Elkatatny

    (Department of Petroleum Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

Abstract

Drilling in high-pressure high-temperature (HPHT) conditions is a challenging task. The drilling fluid should be designed to provide high density and stable rheological properties. Barite is the most common weighting material used to adjust the required fluid density. Barite settling, or sag, is a common issue in drilling HPHT wells. Barite sagging may cause many problems such as density variations, well-control problems, stuck pipe, downhole drilling fluid losses, or induced wellbore instability. This study assesses the effect of using a new copolymer (based on styrene and acrylic monomers) on the rheological properties and the stability of an invert emulsion drilling fluid, which can be used to drill HPHT wells. The main goal is to prevent the barite sagging issue, which is common in drilling HPHT wells. A sag test was performed under static (vertical and 45° incline) and dynamic conditions in order to evaluate the copolymer’s ability to enhance the suspension properties of the drilling fluid. In addition, the effect of this copolymer on the filtration properties was performed. The obtained results showed that adding the new copolymer with 1 lb/bbl concentration has no effect on the density and electrical stability. The sag issue was eliminated by adding 1 lb/bbl of the copolymer to the invert emulsion drilling fluid at a temperature >300 °F under static and dynamic conditions. Adding the copolymer enhanced the storage modulus by 290% and the gel strength by 50%, which demonstrated the power of the new copolymer to prevent the settling of the barite particles at a higher temperature. The 1 lb/bbl copolymer’s concentration reduced the filter cake thickness by 40% at 400 °F, which indicates the prevention of barite settling at high temperature.

Suggested Citation

  • Salaheldin Elkatatny, 2018. "Enhancing the Stability of Invert Emulsion Drilling Fluid for Drilling in High-Pressure High-Temperature Conditions," Energies, MDPI, vol. 11(9), pages 1-15, September.
  • Handle: RePEc:gam:jeners:v:11:y:2018:i:9:p:2393-:d:169110
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/11/9/2393/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/11/9/2393/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zisis Vryzas & Vassilios C. Kelessidis, 2017. "Nano-Based Drilling Fluids: A Review," Energies, MDPI, vol. 10(4), pages 1-34, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abdelmjeed Mohamed & Saad Al-Afnan & Salaheldin Elkatatny & Ibnelwaleed Hussein, 2020. "Prevention of Barite Sag in Water-Based Drilling Fluids by A Urea-Based Additive for Drilling Deep Formations," Sustainability, MDPI, vol. 12(7), pages 1-19, March.
    2. Abdelmjeed Mohamed & Salem Basfar & Salaheldin Elkatatny & Abdulaziz Al-Majed, 2019. "Prevention of Barite Sag in Oil-Based Drilling Fluids Using a Mixture of Barite and Ilmenite as Weighting Material," Sustainability, MDPI, vol. 11(20), pages 1-14, October.
    3. Sławomir Błaż & Grzegorz Zima & Bartłomiej Jasiński & Marcin Kremieniewski, 2021. "Invert Drilling Fluids with High Internal Phase Content," Energies, MDPI, vol. 14(15), pages 1-14, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mikhail A. Sheremet & Hakan F. Oztop & Dmitriy V. Gvozdyakov & Mohamed E. Ali, 2018. "Impacts of Heat-Conducting Solid Wall and Heat-Generating Element on Free Convection of Al 2 O 3 /H 2 O Nanofluid in a Cavity with Open Border," Energies, MDPI, vol. 11(12), pages 1-17, December.
    2. Razali, S.Z. & Yunus, R. & Abdul Rashid, Suraya & Lim, H.N. & Mohamed Jan, B., 2018. "Review of biodegradable synthetic-based drilling fluid: Progression, performance and future prospect," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 171-186.
    3. Pinghe Sun & Junyi Zhu & Binkui Zhao & Xinxin Zhang & Han Cao & Mingjin Tian & Meng Han & Weisheng Liu, 2019. "Study on the Mechanism of Ionic Stabilizers on Shale Gas Reservoir Mechanics in Northwestern Hunan," Energies, MDPI, vol. 12(12), pages 1-11, June.
    4. Jurij Šporin & Tilen Balaško & Primož Mrvar & Blaž Janc & Željko Vukelić, 2020. "Change of the Properties of Steel Material of the Roller Cone Bit Due to the Influence of the Drilling Operational Parameters and Rock Properties," Energies, MDPI, vol. 13(22), pages 1-22, November.
    5. Agostinho C. B. Junior & Raphael R. Silva & Giovanna L. R. Leal & Tarsila M. Tertuliano & Rafael P. Alves & Alfredo I. C. Garnica & Fabiola D. S. Curbelo, 2021. "The Influences of NP100 Surfactant and Pine-Oil Concentrations on Filtrate Volume and Filter-Cake Thickness of Microemulsion-Based Drilling Fluids (O/W)," Energies, MDPI, vol. 14(16), pages 1-15, August.
    6. Shuya Chen & Yanping Shi & Xianyu Yang & Kunzhi Xie & Jihua Cai, 2019. "Design and Evaluation of a Surfactant–Mixed Metal Hydroxide-Based Drilling Fluid for Maintaining Wellbore Stability in Coal Measure Strata," Energies, MDPI, vol. 12(10), pages 1-19, May.
    7. Alaa Ahmed & Amin Sharifi Haddad & Roozbeh Rafati & Ahmed Bashir & Ahmed M. AlSabagh & Amany A. Aboulrous, 2021. "Developing a Thermally Stable Ester-Based Drilling Fluid for Offshore Drilling Operations by Using Aluminum Oxide Nanorods," Sustainability, MDPI, vol. 13(6), pages 1-18, March.
    8. Omid Mosalman Haghighi & Ghasem Zargar & Abbas Khaksar Manshad & Muhammad Ali & Mohammad Ali Takassi & Jagar A. Ali & Alireza Keshavarz, 2020. "Effect of Environment-Friendly Non-Ionic Surfactant on Interfacial Tension Reduction and Wettability Alteration; Implications for Enhanced Oil Recovery," Energies, MDPI, vol. 13(15), pages 1-18, August.
    9. Hany Gamal & Salaheldin Elkatatny & Salem Basfar & Abdulaziz Al-Majed, 2019. "Effect of pH on Rheological and Filtration Properties of Water-Based Drilling Fluid Based on Bentonite," Sustainability, MDPI, vol. 11(23), pages 1-13, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:11:y:2018:i:9:p:2393-:d:169110. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.