IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v43y2015icp1273-1284.html
   My bibliography  Save this article

Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook

Author

Listed:
  • Ma, Tao
  • Yang, Hongxing
  • Zhang, Yinping
  • Lu, Lin
  • Wang, Xin

Abstract

The study presented in this paper is based on a detailed review of the literature focused on the use of phase change materials (PCM) for photovoltaic (PV) module thermal regulation and electrical efficiency improvement. The influence of high temperature on PV power generation has been examined and the findings have highlighted the importance of effective thermal regulation for PV models. Various PV cooling methods employed to maintain better PV performance are discussed and the recently emerging PV–PCM system concept for thermal regulation is introduced. A comprehensive literature review of the state-of-the-art aspects of this technology, such as system development, performance evaluation, materials selection, heat transfer improvement, numerical models, simulation, and application in practice is given. The PV–PCM system, however, might not be economically feasible if the enhancement of PV efficiency only is sought. The PV–ST–PCM system, i.e. integrated with a solar thermal (ST) system, has therefore been investigated as the stored heat can be extracted for other thermal applications. The dual PCM roles demonstrate significant application prospects for the combined technology. However, both PV–PCM and PV–ST–PCM systems are still mainly in the research and laboratory test stages, with obvious scope for practical applications but with attendant challenges. Suggestions for the future work are presented.

Suggested Citation

  • Ma, Tao & Yang, Hongxing & Zhang, Yinping & Lu, Lin & Wang, Xin, 2015. "Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1273-1284.
    • Handle: RePEc:eee:rensus:v:43:y:2015:i:c:p:1273-1284
    DOI: 10.1016/j.rser.2014.12.003
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032114010557
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2014.12.003?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ma, Tao & Yang, Hongxing & Lu, Lin, 2014. "Solar photovoltaic system modeling and performance prediction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 304-315.
    2. Wilson, Earle, 2009. "Theoretical and operational thermal performance of a ‘wet’ crystalline silicon PV module under Jamaican conditions," Renewable Energy, Elsevier, vol. 34(6), pages 1655-1660.
    3. Bücher, K. & Kleiss, G. & Dätzner, D., 1998. "Photovoltaic modules in buildings: Performance and safety," Renewable Energy, Elsevier, vol. 15(1), pages 545-551.
    4. Abednego Oscar Tanuwijava & Ching Jenq Ho & Chi-Ming Lai & Chao-Yang Huang, 2013. "Numerical Investigation of the Thermal Management Performance of MEPCM Modules for PV Applications," Energies, MDPI, vol. 6(8), pages 1-15, August.
    5. Moshfegh, B. & Sandberg, M., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part I - Numerical Study," Renewable Energy, Elsevier, vol. 8(1), pages 248-253.
    6. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    7. Regin, A. Felix & Solanki, S.C. & Saini, J.S., 2008. "Heat transfer characteristics of thermal energy storage system using PCM capsules: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2438-2458, December.
    8. Valerio Lo Brano & Giuseppina Ciulla & Antonio Piacentino & Fabio Cardona, 2013. "On the Efficacy of PCM to Shave Peak Temperature of Crystalline Photovoltaic Panels: An FDM Model and Field Validation," Energies, MDPI, vol. 6(12), pages 1-23, November.
    9. Makki, Adham & Omer, Siddig & Sabir, Hisham, 2015. "Advancements in hybrid photovoltaic systems for enhanced solar cells performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 658-684.
    10. Sandberg, M. & Moshfegh, B., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part II - Experimental study," Renewable Energy, Elsevier, vol. 8(1), pages 254-258.
    11. Radziemska, E., 2003. "The effect of temperature on the power drop in crystalline silicon solar cells," Renewable Energy, Elsevier, vol. 28(1), pages 1-12.
    12. Smith, Christopher J. & Forster, Piers M. & Crook, Rolf, 2014. "Global analysis of photovoltaic energy output enhanced by phase change material cooling," Applied Energy, Elsevier, vol. 126(C), pages 21-28.
    13. Moshfegh, B. & Sandberg, M., 1998. "Flow and heat transfer in the air gap behind photovoltaic panels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 2(3), pages 287-301, September.
    14. Ma, Tao & Yang, Hongxing & Lu, Lin, 2014. "A feasibility study of a stand-alone hybrid solar–wind–battery system for a remote island," Applied Energy, Elsevier, vol. 121(C), pages 149-158.
    15. Ji, Jie & Liu, Keliang & Chow, Tin-tai & Pei, Gang & He, Wei & He, Hanfeng, 2008. "Performance analysis of a photovoltaic heat pump," Applied Energy, Elsevier, vol. 85(8), pages 680-693, August.
    16. Ling, Ziye & Zhang, Zhengguo & Shi, Guoquan & Fang, Xiaoming & Wang, Lei & Gao, Xuenong & Fang, Yutang & Xu, Tao & Wang, Shuangfeng & Liu, Xiaohong, 2014. "Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 427-438.
    17. Lo Brano, Valerio & Ciulla, Giuseppina & Piacentino, Antonio & Cardona, Fabio, 2014. "Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: Description and experimental validation," Renewable Energy, Elsevier, vol. 68(C), pages 181-193.
    18. Sandberg, Mats & Moshfegh, Bahram, 1998. "Ventilated-solar roof air flow and heat transfer investigation," Renewable Energy, Elsevier, vol. 15(1), pages 287-292.
    19. Ma, Tao & Yang, Hongxing & Lu, Lin, 2013. "Performance evaluation of a stand-alone photovoltaic system on an isolated island in Hong Kong," Applied Energy, Elsevier, vol. 112(C), pages 663-672.
    20. Hasan, M. Arif & Sumathy, K., 2010. "Photovoltaic thermal module concepts and their performance analysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1845-1859, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ma, Tao & Zhao, Jiaxin & Li, Zhenpeng, 2018. "Mathematical modelling and sensitivity analysis of solar photovoltaic panel integrated with phase change material," Applied Energy, Elsevier, vol. 228(C), pages 1147-1158.
    2. Browne, M.C. & Norton, B. & McCormack, S.J., 2015. "Phase change materials for photovoltaic thermal management," Renewable and Sustainable Energy Reviews, Elsevier, vol. 47(C), pages 762-782.
    3. Li, Zhenpeng & Ma, Tao & Zhao, Jiaxin & Song, Aotian & Cheng, Yuanda, 2019. "Experimental study and performance analysis on solar photovoltaic panel integrated with phase change material," Energy, Elsevier, vol. 178(C), pages 471-486.
    4. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    5. Hamed, Tareq Abu & Alshare, Aiman & El-Khalil, Hossam, 2019. "Passive cooling of building-integrated photovolatics in desert conditions: Experiment and modeling," Energy, Elsevier, vol. 170(C), pages 131-138.
    6. Zondag, H.A., 2008. "Flat-plate PV-Thermal collectors and systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(4), pages 891-959, May.
    7. Makki, Adham & Omer, Siddig & Sabir, Hisham, 2015. "Advancements in hybrid photovoltaic systems for enhanced solar cells performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 658-684.
    8. D'Orazio, M. & Di Perna, C. & Di Giuseppe, E., 2014. "Experimental operating cell temperature assessment of BIPV with different installation configurations on roofs under Mediterranean climate," Renewable Energy, Elsevier, vol. 68(C), pages 378-396.
    9. Ma, Tao & Yang, Hongxing & Lu, Lin & Peng, Jinqing, 2015. "Optimal design of an autonomous solar–wind-pumped storage power supply system," Applied Energy, Elsevier, vol. 160(C), pages 728-736.
    10. Savvakis, Nikolaos & Tsoutsos, Theocharis, 2021. "Theoretical design and experimental evaluation of a PV+PCM system in the mediterranean climate," Energy, Elsevier, vol. 220(C).
    11. K. B. Prakash & Manoj Kumar Pasupathi & Subramaniyan Chinnasamy & S. Saravanakumar & Murugesan Palaniappan & Abdulaziz Alasiri & M. Chandrasekaran, 2023. "Energy and Exergy Enhancement Study on PV Systems with Phase Change Material," Sustainability, MDPI, vol. 15(4), pages 1-13, February.
    12. Hasan, M. Arif & Sumathy, K., 2010. "Photovoltaic thermal module concepts and their performance analysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1845-1859, September.
    13. Zapałowicz, Zbigniew & Zeńczak, Wojciech, 2021. "The possibilities to improve ship's energy efficiency through the application of PV installation including cooled modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    14. Abdulmunem, Abdulmunem R. & Mohd Samin, Pakharuddin & Abdul Rahman, Hasimah & Hussien, Hashim A. & Izmi Mazali, Izhari & Ghazali, Habibah, 2021. "Numerical and experimental analysis of the tilt angle’s effects on the characteristics of the melting process of PCM-based as PV cell’s backside heat sink," Renewable Energy, Elsevier, vol. 173(C), pages 520-530.
    15. Li, Guiqiang & Shittu, Samson & Diallo, Thierno M.O. & Yu, Min & Zhao, Xudong & Ji, Jie, 2018. "A review of solar photovoltaic-thermoelectric hybrid system for electricity generation," Energy, Elsevier, vol. 158(C), pages 41-58.
    16. Shabani, Masoume & Mahmoudimehr, Javad, 2018. "Techno-economic role of PV tracking technology in a hybrid PV-hydroelectric standalone power system," Applied Energy, Elsevier, vol. 212(C), pages 84-108.
    17. Stropnik, Rok & Stritih, Uroš, 2016. "Increasing the efficiency of PV panel with the use of PCM," Renewable Energy, Elsevier, vol. 97(C), pages 671-679.
    18. V. Tirupati Rao & Y. Raja Sekhar, 2023. "Hybrid Photovoltaic/Thermal (PVT) Collector Systems With Different Absorber Configurations For Thermal Management – A Review," Energy & Environment, , vol. 34(3), pages 690-735, May.
    19. Soares, N. & Bastos, J. & Pereira, L. Dias & Soares, A. & Amaral, A.R. & Asadi, E. & Rodrigues, E. & Lamas, F.B. & Monteiro, H. & Lopes, M.A.R. & Gaspar, A.R., 2017. "A review on current advances in the energy and environmental performance of buildings towards a more sustainable built environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 845-860.
    20. Shi, Long & Zhang, Guomin & Yang, Wei & Huang, Dongmei & Cheng, Xudong & Setunge, Sujeeva, 2018. "Determining the influencing factors on the performance of solar chimney in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 223-238.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:43:y:2015:i:c:p:1273-1284. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.