IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v2y1998i3p287-301.html
   My bibliography  Save this article

Flow and heat transfer in the air gap behind photovoltaic panels

Author

Listed:
  • Moshfegh, B.
  • Sandberg, M.

Abstract

The impetus of this paper is to analyse numerically and experimentally the flow and heat transfer characteristics of buoyancy-driven air convection behind photovoltaic panels. Both convection and radiation heat exchanges are considered as the heat transfer mechanisms by which the thermal energy is transferred into the air. Numerical and experimental results are obtained for a channel of 7.0 m in height and the channel walls are separated by a distance of 0.23 m. In the experiment heat is supplied to the air gap from heating foil attached to one of the vertical walls. Different input heat fluxes and emissivity of the bounding surfaces are considered in order to show their effect on the heat transfer across the air layer. Detailed studies of the flow and thermal fields in the air are presented in order to explore the thermal behaviour of the air in the channel. Velocity and temperature profiles of the outlet air and the surface temperature of the heated and insulated wall is presented. The numerical results agreed well with the experimental measurements.

Suggested Citation

  • Moshfegh, B. & Sandberg, M., 1998. "Flow and heat transfer in the air gap behind photovoltaic panels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 2(3), pages 287-301, September.
    • Handle: RePEc:eee:rensus:v:2:y:1998:i:3:p:287-301
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364-0321(98)00005-7
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sandberg, M. & Moshfegh, B., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part II - Experimental study," Renewable Energy, Elsevier, vol. 8(1), pages 254-258.
    2. Moshfegh, B. & Sandberg, M., 1996. "Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part I - Numerical Study," Renewable Energy, Elsevier, vol. 8(1), pages 248-253.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bazilian, Morgan D. & Kamalanathan, Harry & Prasad, D.K., 2002. "Thermographic analysis of a building integrated photovoltaic system," Renewable Energy, Elsevier, vol. 26(3), pages 449-461.
    2. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    3. Khedari, Joseph & Rachapradit, Ninnart & Hirunlabh, Jongjit, 2003. "Field study of performance of solar chimney with air-conditioned building," Energy, Elsevier, vol. 28(11), pages 1099-1114.
    4. Chow, T.T., 2010. "A review on photovoltaic/thermal hybrid solar technology," Applied Energy, Elsevier, vol. 87(2), pages 365-379, February.
    5. Bai, Attila & Popp, József & Balogh, Péter & Gabnai, Zoltán & Pályi, Béla & Farkas, István & Pintér, Gábor & Zsiborács, Henrik, 2016. "Technical and economic effects of cooling of monocrystalline photovoltaic modules under Hungarian conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1086-1099.
    6. Li, Guiqiang & Shittu, Samson & Diallo, Thierno M.O. & Yu, Min & Zhao, Xudong & Ji, Jie, 2018. "A review of solar photovoltaic-thermoelectric hybrid system for electricity generation," Energy, Elsevier, vol. 158(C), pages 41-58.
    7. Hasan, M. Arif & Sumathy, K., 2010. "Photovoltaic thermal module concepts and their performance analysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1845-1859, September.
    8. Zondag, H.A., 2008. "Flat-plate PV-Thermal collectors and systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(4), pages 891-959, May.
    9. Keliang, Liu & Jie, Ji & Tin-tai, Chow & Gang, Pei & Hanfeng, He & Aiguo, Jiang & Jichun, Yang, 2009. "Performance study of a photovoltaic solar assisted heat pump with variable-frequency compressor – A case study in Tibet," Renewable Energy, Elsevier, vol. 34(12), pages 2680-2687.
    10. Makki, Adham & Omer, Siddig & Sabir, Hisham, 2015. "Advancements in hybrid photovoltaic systems for enhanced solar cells performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 658-684.
    11. Lu, Wei & Wu, Yupeng & Eames, Philip, 2018. "Design and development of a Building Façade Integrated Asymmetric Compound Parabolic Photovoltaic concentrator (BFI-ACP-PV)," Applied Energy, Elsevier, vol. 220(C), pages 325-336.
    12. Bazilian, Morgan D. & Prasad, Deo, 2002. "Modelling of a photovoltaic heat recovery system and its role in a design decision support tool for building professionals," Renewable Energy, Elsevier, vol. 27(1), pages 57-68.
    13. Ji, Jie & Liu, Keliang & Chow, Tin-tai & Pei, Gang & He, Wei & He, Hanfeng, 2008. "Performance analysis of a photovoltaic heat pump," Applied Energy, Elsevier, vol. 85(8), pages 680-693, August.
    14. D'Orazio, M. & Di Perna, C. & Di Giuseppe, E., 2014. "Experimental operating cell temperature assessment of BIPV with different installation configurations on roofs under Mediterranean climate," Renewable Energy, Elsevier, vol. 68(C), pages 378-396.
    15. Vittorini, Diego & Castellucci, Nicola & Cipollone, Roberto, 2017. "Heat recovery potential and electrical performances in-field investigation on a hybrid PVT module," Applied Energy, Elsevier, vol. 205(C), pages 44-56.
    16. Spiliotis, Konstantinos & Gonçalves, Juliana E. & Saelens, Dirk & Baert, Kris & Driesen, Johan, 2020. "Electrical system architectures for building-integrated photovoltaics: A comparative analysis using a modelling framework in Modelica," Applied Energy, Elsevier, vol. 261(C).
    17. Sivaraman, Deepak & Keoleian, Gregory A., 2010. "Photovoltaic (PV) electricity: Comparative analyses of CO2 abatement at different fuel mix scales in the US," Energy Policy, Elsevier, vol. 38(10), pages 5708-5718, October.
    18. Zhai, X.Q. & Song, Z.P. & Wang, R.Z., 2011. "A review for the applications of solar chimneys in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3757-3767.
    19. Mattei, M. & Notton, G. & Cristofari, C. & Muselli, M. & Poggi, P., 2006. "Calculation of the polycrystalline PV module temperature using a simple method of energy balance," Renewable Energy, Elsevier, vol. 31(4), pages 553-567.
    20. Ma, Tao & Yang, Hongxing & Zhang, Yinping & Lu, Lin & Wang, Xin, 2015. "Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1273-1284.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    2. Zondag, H.A., 2008. "Flat-plate PV-Thermal collectors and systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(4), pages 891-959, May.
    3. D'Orazio, M. & Di Perna, C. & Di Giuseppe, E., 2014. "Experimental operating cell temperature assessment of BIPV with different installation configurations on roofs under Mediterranean climate," Renewable Energy, Elsevier, vol. 68(C), pages 378-396.
    4. Sengupta, Ayan & Mishra, Dipti Prasad & Sarangi, Shailesh Kumar, 2022. "Computational performance analysis of a solar chimney using surface modifications of the absorber plate," Renewable Energy, Elsevier, vol. 185(C), pages 1095-1109.
    5. Mukherjee, S. & Shit, G.C., 2022. "Mathematical modeling of electrothermal couple stress nanofluid flow and entropy in a porous microchannel under injection process," Applied Mathematics and Computation, Elsevier, vol. 426(C).
    6. Mohammed Elden & K. Sopian & Fatah Alghoul & Abdelnasser Abouhnik & Ae. M., 2013. "Solar Chimney Model Parameters to Enhance Cooling PV Panel Performance," Modern Applied Science, Canadian Center of Science and Education, vol. 7(2), pages 1-24, February.
    7. Shi, Long & Zhang, Guomin & Yang, Wei & Huang, Dongmei & Cheng, Xudong & Setunge, Sujeeva, 2018. "Determining the influencing factors on the performance of solar chimney in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 223-238.
    8. Zapałowicz, Zbigniew & Zeńczak, Wojciech, 2021. "The possibilities to improve ship's energy efficiency through the application of PV installation including cooled modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    9. Han, Jun & Lu, Lin & Yang, Hongxing, 2010. "Numerical evaluation of the mixed convective heat transfer in a double-pane window integrated with see-through a-Si PV cells with low-e coatings," Applied Energy, Elsevier, vol. 87(11), pages 3431-3437, November.
    10. Dawood, Norhan I. & Jalil, Jalal M. & Ahmed, Majida K., 2022. "Investigation of a novel window solar air collector with 7-moveable absorber plates," Energy, Elsevier, vol. 257(C).
    11. Zhang, Xingxing & Zhao, Xudong & Xu, Jihuan & Yu, Xiaotong, 2013. "Characterization of a solar photovoltaic/loop-heat-pipe heat pump water heating system," Applied Energy, Elsevier, vol. 102(C), pages 1229-1245.
    12. Sandberg, Mats & Moshfegh, Bahram, 1998. "Ventilated-solar roof air flow and heat transfer investigation," Renewable Energy, Elsevier, vol. 15(1), pages 287-292.
    13. Kundakci Koyunbaba, Basak & Yilmaz, Zerrin, 2012. "The comparison of Trombe wall systems with single glass, double glass and PV panels," Renewable Energy, Elsevier, vol. 45(C), pages 111-118.
    14. Ma, Tao & Yang, Hongxing & Zhang, Yinping & Lu, Lin & Wang, Xin, 2015. "Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1273-1284.
    15. Stazi, F. & Tomassoni, F. & Vegliò, A. & Di Perna, C., 2011. "Experimental evaluation of ventilated walls with an external clay cladding," Renewable Energy, Elsevier, vol. 36(12), pages 3373-3385.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:2:y:1998:i:3:p:287-301. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.