IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v193y2024ics1364032124000108.html
   My bibliography  Save this article

Indoor environment PV applications: Estimation of the maximum harvestable power

Author

Listed:
  • Yufenyuy, Severine Wiysahnyuy
  • Mengata, Ghislain Mengounou
  • Nneme Nneme, Leandre
  • Bongwirnso, Umaru Mohammed

Abstract

The use of PV modules for powering sensors in an indoor environment requires that, during the design process, the harvestable power be evaluated and compared with the power requirements of the load device to validate their compatibility for a given type of light source and level of illumination. The models reported recently to relate power to illumination during power estimation are seen to result in large estimation errors in the case of an indoor environment. This paper seeks to propose an appropriate model that can be exploited during maximum power estimation in an indoor environment to relate power to illumination level. Proceeding from fitting measured data to the three-diode model of the PV module and based on the errors and execution time, the Grey Wolf Optimisation Algorithm, among others, proved to be accurate for estimating maximum power. The relationship between maximum power and illumination was seen to take the form of a second-degree polynomial. This was validated by comparing the values of power estimated by this model to the measured values as well as values estimated with the linear model, the exponential model, and the model proposed by Joseph Amajama. The proposed model proved to be more accurate than the models reported, recording errors of not more than 5 %, which is acceptable for system design. This will go a long way towards facilitating the design of indoor energy harvesting systems that can be used for powering smart sensors and other IoT devices.

Suggested Citation

  • Yufenyuy, Severine Wiysahnyuy & Mengata, Ghislain Mengounou & Nneme Nneme, Leandre & Bongwirnso, Umaru Mohammed, 2024. "Indoor environment PV applications: Estimation of the maximum harvestable power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 193(C).
  • Handle: RePEc:eee:rensus:v:193:y:2024:i:c:s1364032124000108
    DOI: 10.1016/j.rser.2024.114287
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032124000108
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.rser.2024.114287?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sacco, Adriano & Rolle, Lidia & Scaltrito, Luciano & Tresso, Elena & Pirri, Candido Fabrizio, 2013. "Characterization of photovoltaic modules for low-power indoor application," Applied Energy, Elsevier, vol. 102(C), pages 1295-1302.
    2. De Rossi, Francesca & Pontecorvo, Tadeo & Brown, Thomas M., 2015. "Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting," Applied Energy, Elsevier, vol. 156(C), pages 413-422.
    3. Evaldo C. Gouvêa & Pedro M. Sobrinho & Teófilo M. Souza, 2017. "Spectral Response of Polycrystalline Silicon Photovoltaic Cells under Real-Use Conditions," Energies, MDPI, vol. 10(8), pages 1-13, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Russo, Johnny & Ray, William & Litz, Marc S., 2017. "Low light illumination study on commercially available homojunction photovoltaic cells," Applied Energy, Elsevier, vol. 191(C), pages 10-21.
    2. Zhao, Tingting & Jiang, Weitao & Niu, Dong & Liu, Hongzhong & Chen, Bangdao & Shi, Yongsheng & Yin, Lei & Lu, Bingheng, 2017. "Flexible pyroelectric device for scavenging thermal energy from chemical process and as self-powered temperature monitor," Applied Energy, Elsevier, vol. 195(C), pages 754-760.
    3. Zardetto, V. & Mincuzzi, G. & De Rossi, F. & Di Giacomo, F. & Reale, A. & Di Carlo, A. & Brown, T.M., 2014. "Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells," Applied Energy, Elsevier, vol. 113(C), pages 1155-1161.
    4. Chen, Qian & Oh, Seung Jin & Burhan, Muhammad, 2020. "Design and optimization of a novel electrowetting-driven solar-indoor lighting system," Applied Energy, Elsevier, vol. 269(C).
    5. Cannavale, Alessandro & Ierardi, Laura & Hörantner, Maximilian & Eperon, Giles E. & Snaith, Henry J. & Ayr, Ubaldo & Martellotta, Francesco, 2017. "Improving energy and visual performance in offices using building integrated perovskite-based solar cells: A case study in Southern Italy," Applied Energy, Elsevier, vol. 205(C), pages 834-846.
    6. Ahmad, Lujean & Khordehgah, Navid & Malinauskaite, Jurgita & Jouhara, Hussam, 2020. "Recent advances and applications of solar photovoltaics and thermal technologies," Energy, Elsevier, vol. 207(C).
    7. Chen, Zhi-Hui & Qiao, Na & Wang, Yang & Liang, Li & Yang, Yibiao & Ye, Han & Liu, Shaoding, 2016. "Efficient broadband energy absorption based on inverted-pyramid photonic crystal surface and two-dimensional randomly patterned metallic reflector," Applied Energy, Elsevier, vol. 172(C), pages 59-65.
    8. Bogdan Dziadak, 2023. "Hybrid Optical and Thermal Energy Conversion System to Power Internet of Things Nodes," Energies, MDPI, vol. 16(20), pages 1-19, October.
    9. Marucci, Alvaro & Cappuccini, Andrea, 2016. "Dynamic photovoltaic greenhouse: Energy efficiency in clear sky conditions," Applied Energy, Elsevier, vol. 170(C), pages 362-376.
    10. Federico Bella & Simone Galliano & Claudio Gerbaldi & Guido Viscardi, 2016. "Cobalt-Based Electrolytes for Dye-Sensitized Solar Cells: Recent Advances towards Stable Devices," Energies, MDPI, vol. 9(5), pages 1-22, May.
    11. Costas Prouskas & Angelos Mourkas & Georgios Zois & Elefterios Lidorikis & Panos Patsalas, 2022. "A New Type of Architecture of Dye-Sensitized Solar Cells as an Alternative Pathway to Outdoor Photovoltaics," Energies, MDPI, vol. 15(7), pages 1-14, March.
    12. Cuce, Erdem & Cuce, Pinar Mert & Bali, Tulin, 2013. "An experimental analysis of illumination intensity and temperature dependency of photovoltaic cell parameters," Applied Energy, Elsevier, vol. 111(C), pages 374-382.
    13. Xiong, Haocheng & Wang, Linbing, 2016. "Piezoelectric energy harvester for public roadway: On-site installation and evaluation," Applied Energy, Elsevier, vol. 174(C), pages 101-107.
    14. Gori Shankar Sharma & Om Prakash Mahela & Mohamed G. Hussien & Baseem Khan & Sanjeevikumar Padmanaban & Muhammed B. Shafik & Zakaria M. Salem Elbarbary, 2022. "Performance Evaluation of a MW-Size Grid-Connected Solar Photovoltaic Plant Considering the Impact of Tilt Angle," Sustainability, MDPI, vol. 14(3), pages 1-28, January.
    15. Fernández-Solas, Álvaro & Micheli, Leonardo & Almonacid, Florencia & Fernández, Eduardo F., 2021. "Optical degradation impact on the spectral performance of photovoltaic technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    16. Si Kuan Thio & Sung-Yong Park, 2019. "Dispersive Optical Systems for Highly-Concentrated Solar Spectrum Splitting: Concept, Design, and Performance Analyses," Energies, MDPI, vol. 12(24), pages 1-18, December.
    17. Hug, Hubert & Bader, Michael & Mair, Peter & Glatzel, Thilo, 2014. "Biophotovoltaics: Natural pigments in dye-sensitized solar cells," Applied Energy, Elsevier, vol. 115(C), pages 216-225.
    18. De Rossi, Francesca & Pontecorvo, Tadeo & Brown, Thomas M., 2015. "Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting," Applied Energy, Elsevier, vol. 156(C), pages 413-422.
    19. Bühler, Alexandre J. & Perin Gasparin, Fabiano & Krenzinger, Arno, 2014. "Post-processing data of measured I–V curves of photovoltaic devices," Renewable Energy, Elsevier, vol. 68(C), pages 602-610.
    20. Kati Miettunen & Jaana Vapaavuori & Aapo Poskela & Armi Tiihonen & Peter D. Lund, 2018. "Recent progress in flexible dye solar cells," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 7(5), September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:193:y:2024:i:c:s1364032124000108. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.