IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v32y2007i14p2291-2305.html
   My bibliography  Save this article

Fluid dynamics wind turbine design: Critical analysis, optimization and application of BEM theory

Author

Listed:
  • Lanzafame, R.
  • Messina, M.

Abstract

A mathematical model for fluid dynamics wind turbine design (based on the blade element momentum theory) has been implemented and improved. The mathematical simulations have been compared with experimental data found in the literature. The simulation was performed for the whole wind velocity range, in on-design and off-design conditions. Several simulations were performed in order to maximize the agreement between the simulated and experimental data. Particular attention was paid to the tangential induction factor and to the models for the representation of the lift and drag coefficients. A comparison was also made between the mathematical model presented in the paper and those considered in the literature. Finally, the model was implemented to optimize rotor performance, especially at low wind velocities, which is crucial to produce power during the machine start-up phase.

Suggested Citation

  • Lanzafame, R. & Messina, M., 2007. "Fluid dynamics wind turbine design: Critical analysis, optimization and application of BEM theory," Renewable Energy, Elsevier, vol. 32(14), pages 2291-2305.
    • Handle: RePEc:eee:renene:v:32:y:2007:i:14:p:2291-2305
    DOI: 10.1016/j.renene.2006.12.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014810700002X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2006.12.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Maalawi, Karam Y. & Badawy, Mahdy T. S., 2001. "A direct method for evaluating performance of horizontal axis wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 5(2), pages 175-190, June.
    2. Maalawi, K.Y. & Badr, M.A, 2003. "A practical approach for selecting optimum wind rotors," Renewable Energy, Elsevier, vol. 28(5), pages 803-822.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. No, T.S. & Kim, J.-E. & Moon, J.H. & Kim, S.J., 2009. "Modeling, control, and simulation of dual rotor wind turbine generator system," Renewable Energy, Elsevier, vol. 34(10), pages 2124-2132.
    2. Mejía, Juan M. & Chejne, Farid & Smith, Ricardo & Rodríguez, Luis F. & Fernández, Oscar & Dyner, Isaac, 2006. "Simulation of wind energy output at Guajira, Colombia," Renewable Energy, Elsevier, vol. 31(3), pages 383-399.
    3. Lanzafame, R. & Messina, M., 2010. "Power curve control in micro wind turbine design," Energy, Elsevier, vol. 35(2), pages 556-561.
    4. Chehouri, Adam & Younes, Rafic & Ilinca, Adrian & Perron, Jean, 2015. "Review of performance optimization techniques applied to wind turbines," Applied Energy, Elsevier, vol. 142(C), pages 361-388.
    5. Singh, Ronit K. & Ahmed, M. Rafiuddin, 2013. "Blade design and performance testing of a small wind turbine rotor for low wind speed applications," Renewable Energy, Elsevier, vol. 50(C), pages 812-819.
    6. Abdelsalam, Ali M. & El-Askary, W.A. & Kotb, M.A. & Sakr, I.M., 2021. "Experimental study on small scale horizontal axis wind turbine of analytically-optimized blade with linearized chord twist angle profile," Energy, Elsevier, vol. 216(C).
    7. Singh, Ronit K. & Ahmed, M. Rafiuddin & Zullah, Mohammad Asid & Lee, Young-Ho, 2012. "Design of a low Reynolds number airfoil for small horizontal axis wind turbines," Renewable Energy, Elsevier, vol. 42(C), pages 66-76.
    8. Artur Bugała & Olga Roszyk, 2020. "Investigation of an Innovative Rotor Modification for a Small-Scale Horizontal Axis Wind Turbine," Energies, MDPI, vol. 13(10), pages 1-18, May.
    9. Liu, Xiongwei & Wang, Lin & Tang, Xinzi, 2013. "Optimized linearization of chord and twist angle profiles for fixed-pitch fixed-speed wind turbine blades," Renewable Energy, Elsevier, vol. 57(C), pages 111-119.
    10. Cemil Yigit, 2020. "Effect of Air-Ducted Blade Design on Horizontal Axis Wind Turbine Performance," Energies, MDPI, vol. 13(14), pages 1-15, July.
    11. Alkhabbaz, Ali & Yang, Ho-Seong & Weerakoon, A.H Samitha & Lee, Young-Ho, 2021. "A novel linearization approach of chord and twist angle distribution for 10 kW horizontal axis wind turbine," Renewable Energy, Elsevier, vol. 178(C), pages 1398-1420.
    12. Rahimian, Masoud & Walker, Jessica & Penesis, Irene, 2018. "Performance of a horizontal axis marine current turbine– A comprehensive evaluation using experimental, numerical, and theoretical approaches," Energy, Elsevier, vol. 148(C), pages 965-976.
    13. Muhando, Endusa Billy & Senjyu, Tomonobu & Kinjo, Hiroshi & Funabashi, Toshihisa, 2008. "Augmented LQG controller for enhancement of online dynamic performance for WTG system," Renewable Energy, Elsevier, vol. 33(8), pages 1942-1952.
    14. Kyoungboo Yang, 2020. "Geometry Design Optimization of a Wind Turbine Blade Considering Effects on Aerodynamic Performance by Linearization," Energies, MDPI, vol. 13(9), pages 1-18, May.
    15. Maalawi, K.Y. & Badr, M.A, 2003. "A practical approach for selecting optimum wind rotors," Renewable Energy, Elsevier, vol. 28(5), pages 803-822.
    16. Chen, Z.J. & Stol, K.A. & Mace, B.R., 2017. "Wind turbine blade optimisation with individual pitch and trailing edge flap control," Renewable Energy, Elsevier, vol. 103(C), pages 750-765.
    17. Tahani, Mojtaba & Kavari, Ghazale & Masdari, Mehran & Mirhosseini, Mojtaba, 2017. "Aerodynamic design of horizontal axis wind turbine with innovative local linearization of chord and twist distributions," Energy, Elsevier, vol. 131(C), pages 78-91.
    18. Ashuri, T. & Zaaijer, M.B. & Martins, J.R.R.A. & van Bussel, G.J.W. & van Kuik, G.A.M., 2014. "Multidisciplinary design optimization of offshore wind turbines for minimum levelized cost of energy," Renewable Energy, Elsevier, vol. 68(C), pages 893-905.
    19. Ahmadi Asl, Hamid & Kamali Monfared, Reza & Rad, Manouchehr, 2017. "Experimental investigation of blade number and design effects for a ducted wind turbine," Renewable Energy, Elsevier, vol. 105(C), pages 334-343.
    20. Kim, Bumsuk & Kim, Woojune & Lee, Sanglae & Bae, Sungyoul & Lee, Youngho, 2013. "Developement and verification of a performance based optimal design software for wind turbine blades," Renewable Energy, Elsevier, vol. 54(C), pages 166-172.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:32:y:2007:i:14:p:2291-2305. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.