IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v220y2024ics0960148123014994.html
   My bibliography  Save this article

Charging/discharging performance and corrosion behavior of a novel latent heat thermal energy storage device with different fin plate materials

Author

Listed:
  • Jiang, Feng
  • Wang, Hang
  • Hu, Yige
  • Ling, Xiang
  • Zhang, Tongtong

Abstract

The use of low-grade industrial waste heat for building heating could facilitate the decarbonization of heat sector, which accounts for a large share of energy consumption worldwide. However, the uncontrollable fluctuation characteristics of heat source and mismatch between energy supply and demand greatly limit its large-scale application. Notably, latent heat thermal energy storage (LHTES) technology, showing remarkable advantages in terms of energy storage density, heat storage temperature (nearly constant), technology maturity and cost, could effectively solve the above problem. Hence, this work specially focused on LHTES device that utilized fin plate for improving performance of heat harvesting and reuse. Furthermore, charging/discharging performance and corrosion behavior of a novel device with different fin plate materials (brass, aluminum and stainless steel) were investigated. Results showed that temperature difference between plate surface and melting point above 10 °C effectively shortened charging time more than 45.7 %. A higher thermal conductivity of fin material contributed to a better thermal performance. Aluminum and stainless steel preferred to be used as fin plate materials of targeted hydrated salt owing to their low corrosion rate of 0.016 and 0.002 mg/(cm2·yr), respectively. This work was expected to provide a guidance on designing a LHTES device applied in building heating.

Suggested Citation

  • Jiang, Feng & Wang, Hang & Hu, Yige & Ling, Xiang & Zhang, Tongtong, 2024. "Charging/discharging performance and corrosion behavior of a novel latent heat thermal energy storage device with different fin plate materials," Renewable Energy, Elsevier, vol. 220(C).
    • Handle: RePEc:eee:renene:v:220:y:2024:i:c:s0960148123014994
    DOI: 10.1016/j.renene.2023.119584
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123014994
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.119584?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Diao, Y.H. & Liang, L. & Zhao, Y.H. & Wang, Z.Y. & Bai, F.W., 2019. "Numerical investigation of the thermal performance enhancement of latent heat thermal energy storage using longitudinal rectangular fins and flat micro-heat pipe arrays," Applied Energy, Elsevier, vol. 233, pages 894-905.
    2. Xu, Z.Y. & Wang, R.Z. & Yang, Chun, 2019. "Perspectives for low-temperature waste heat recovery," Energy, Elsevier, vol. 176(C), pages 1037-1043.
    3. Zhang, Shengqi & Pu, Liang & Mancin, Simone & Dai, Minghao & Xu, Lingling, 2022. "Role of partial and gradient filling strategies of copper foam on latent thermal energy storage: An experimental study," Energy, Elsevier, vol. 255(C).
    4. Wang, Hang & Hu, Yige & Jiang, Feng & Ling, Xiang, 2022. "Thermal performance of industrial-grade CH3COONa·3H2O-based composite phase change materials in a plate heat storage unit," Energy, Elsevier, vol. 261(PA).
    5. Wang, Yan & Yu, Kaixiang & Peng, Hao & Ling, Xiang, 2019. "Preparation and thermal properties of sodium acetate trihydrate as a novel phase change material for energy storage," Energy, Elsevier, vol. 167(C), pages 269-274.
    6. Fernández, Angel G. & Fullana, Margalida & Calabrese, Luigi & Palomba, Valeria & Frazzica, Andrea & Cabeza, Luisa F., 2020. "Corrosion assessment of promising hydrated salts as sorption materials for thermal energy storage systems," Renewable Energy, Elsevier, vol. 150(C), pages 428-434.
    7. Wong-Pinto, Liey-Si & Milian, Yanio & Ushak, Svetlana, 2020. "Progress on use of nanoparticles in salt hydrates as phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 122(C).
    8. Jiang, Feng & Ge, Zhiwei & Ling, Xiang & Cang, Daqiang & Zhang, Lingling & Ding, Yulong, 2021. "Improved thermophysical properties of shape-stabilized NaNO3 using a modified diatomite-based porous ceramic for solar thermal energy storage," Renewable Energy, Elsevier, vol. 179(C), pages 327-338.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shan, Lianying & Martin, Andrew & Chiu, Justin NingWei, 2024. "Techno-economic analysis of latent heat thermal energy storage integrated heat pump for indoor heating," Energy, Elsevier, vol. 298(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hu, Yige & Wang, Hang & Chen, Hu & Ding, Yang & Liu, Changtian & Jiang, Feng & Ling, Xiang, 2023. "A novel hydrated salt-based phase change material for medium- and low-thermal energy storage," Energy, Elsevier, vol. 274(C).
    2. Wang, Hang & Hu, Yige & Jiang, Feng & Ling, Xiang, 2022. "Thermal performance of industrial-grade CH3COONa·3H2O-based composite phase change materials in a plate heat storage unit," Energy, Elsevier, vol. 261(PA).
    3. Zhao, B.C. & Li, T.X. & Gao, J.C. & Wang, R.Z., 2020. "Latent heat thermal storage using salt hydrates for distributed building heating: A multi-level scale-up research," Renewable and Sustainable Energy Reviews, Elsevier, vol. 121(C).
    4. Franco Dominici & Adio Miliozzi & Luigi Torre, 2021. "Thermal Properties of Shape-Stabilized Phase Change Materials Based on Porous Supports for Thermal Energy Storage," Energies, MDPI, vol. 14(21), pages 1-16, November.
    5. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    6. Zhao, B.C. & Wang, R.Z., 2019. "Perspectives for short-term thermal energy storage using salt hydrates for building heating," Energy, Elsevier, vol. 189(C).
    7. Cong, L. & Zou, B. & Palacios, A. & Navarro, M.E. & Qiao, G. & Ding, Y., 2022. "Thickening and gelling agents for formulation of thermal energy storage materials – A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    8. Du, Kun & Calautit, John & Eames, Philip & Wu, Yupeng, 2021. "A state-of-the-art review of the application of phase change materials (PCM) in Mobilized-Thermal Energy Storage (M-TES) for recovering low-temperature industrial waste heat (IWH) for distributed heat," Renewable Energy, Elsevier, vol. 168(C), pages 1040-1057.
    9. Gai Zhang & Hui Cui & Xuecheng Hu & Anchao Qu & Hao Peng & Xiaotian Peng, 2024. "Research on NaCl-KCl High-Temperature Thermal Storage Composite Phase Change Material Based on Modified Blast Furnace Slag," Energies, MDPI, vol. 17(10), pages 1-20, May.
    10. Jiang, Jiatong & Hu, Bin & Wang, R.Z. & Liu, Hua & Zhang, Zhiping & Wu, Yongqiang & Yue, Qingxue & Zhang, Ying, 2024. "Film condensation experiments of R1233zd(E) over horizontal tubes and high-temperature condensation predictions for high-temperature heat pump," Energy, Elsevier, vol. 300(C).
    11. Selimefendigil, Fatih & Öztop, Hakan F., 2020. "Identification of pulsating flow effects with CNT nanoparticles on the performance enhancements of thermoelectric generator (TEG) module in renewable energy applications," Renewable Energy, Elsevier, vol. 162(C), pages 1076-1086.
    12. Fritz, M. & Plötz, P. & Schebek, L., 2022. "A technical and economical comparison of excess heat transport technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    13. Long, Rui & Zhao, Yanan & Li, Mingliang & Pan, Yao & Liu, Zhichun & Liu, Wei, 2021. "Evaluations of adsorbents and salt-methanol solutions for low-grade heat driven osmotic heat engines," Energy, Elsevier, vol. 229(C).
    14. Jayathunga, D.S. & Karunathilake, H.P. & Narayana, M. & Witharana, S., 2024. "Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications - A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    15. Wang, Jingyi & Wang, Zhe & Zhou, Ding & Sun, Kaiyu, 2019. "Key issues and novel optimization approaches of industrial waste heat recovery in district heating systems," Energy, Elsevier, vol. 188(C).
    16. Andrea Aquino & Pietro Poesio, 2021. "Off-Design Exergy Analysis of Convective Drying Using a Two-Phase Multispecies Model," Energies, MDPI, vol. 14(1), pages 1-36, January.
    17. Yang, Chao & Xu, Xing-Rong & Bake, Maitiniyazi & Wu, Chun-Mei & Li, You-Rong & Zheng, Zhang-Jing & Yu, Jia-Jia, 2024. "Numerical investigation and optimization of the melting performance of latent heat thermal energy storage unit strengthened by graded metal foam and mechanical rotation," Renewable Energy, Elsevier, vol. 227(C).
    18. Gao, J.T. & Xu, Z.Y. & Wang, R.Z., 2021. "An air-source hybrid absorption-compression heat pump with large temperature lift," Applied Energy, Elsevier, vol. 291(C).
    19. Wang, Xueli & Zhang, Pengju & Du, Yan & Liu, Lang & Fang, Jiabin & Ji, Changfa & Wang, Mei & Zhang, Bo & Huan, Chao, 2024. "Numerical investigation on the heat storage/heat release performance enhancement of phase change cemented paste backfill body with using casing-type heat pipe heat exchangers," Renewable Energy, Elsevier, vol. 225(C).
    20. Chen, C.Q. & Diao, Y.H. & Zhao, Y.H. & Wang, Z.Y. & Liang, L. & Wang, T.Y. & An, Y., 2021. "Optimization of phase change thermal storage units/devices with multichannel flat tubes: A theoretical study," Renewable Energy, Elsevier, vol. 167(C), pages 700-717.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:220:y:2024:i:c:s0960148123014994. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.