IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v200y2022icp146-153.html
   My bibliography  Save this article

Development of an undershot cross-flow hydraulic turbine resistant to snow and ice masses flowing in an installation canal

Author

Listed:
  • Satou, Eiichi
  • Ikeda, Toshihiko
  • Uchiyama, Tomomi
  • Okayama, Tomoko
  • Miyazawa, Tomoaki
  • Takamure, Kotaro
  • Tsunashima, Daisuke

Abstract

This study developed a microhydraulic turbine that can stably and efficiently generate electricity even in canals where snow and ice masses frequently flow down. An undershot cross-flow hydraulic turbine was selected as the development target, and experiments were conducted in an irrigation canal in a heavy snowfall area. Spherical snowballs were made to flow down to the turbine from the upstream direction. The behavior of the snowballs and the power generation performance were investigated as these snowballs passed through the rotor. When the diameter of the snowball is smaller than the blade interval of the rotor, the snowball passing through the rotor causes a small decrease in power output. In contrast, when the diameter of the snowball is larger than the blade interval, the snowball is entrained between the rotor and canal bottom, temporarily stopping the rotor, and resulting in a large decrease in power generation. These results suggest that an undershot cross-flow hydraulic turbine can reduce power generation performance due to snow and ice masses when its blade interval is larger than the expected size of the snow and ice masses. This study developed some design guidelines for this turbine that are highly adaptable to snow- and ice-flowing irrigation canals.

Suggested Citation

  • Satou, Eiichi & Ikeda, Toshihiko & Uchiyama, Tomomi & Okayama, Tomoko & Miyazawa, Tomoaki & Takamure, Kotaro & Tsunashima, Daisuke, 2022. "Development of an undershot cross-flow hydraulic turbine resistant to snow and ice masses flowing in an installation canal," Renewable Energy, Elsevier, vol. 200(C), pages 146-153.
  • Handle: RePEc:eee:renene:v:200:y:2022:i:c:p:146-153
    DOI: 10.1016/j.renene.2022.09.062
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122014185
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2022.09.062?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Alexander, K.V. & Giddens, E.P. & Fuller, A.M., 2009. "Axial-flow turbines for low head microhydro systems," Renewable Energy, Elsevier, vol. 34(1), pages 35-47.
    2. Golecha, Kailash & Eldho, T.I. & Prabhu, S.V., 2011. "Influence of the deflector plate on the performance of modified Savonius water turbine," Applied Energy, Elsevier, vol. 88(9), pages 3207-3217.
    3. Bao Ngoc Tran & Haechang Jeong & Jun-Ho Kim & Jin-Soon Park & Changjo Yang, 2020. "Effects of Tip Clearance Size on Energy Performance and Pressure Fluctuation of a Tidal Propeller Turbine," Energies, MDPI, vol. 13(16), pages 1-18, August.
    4. Uchiyama, Tomomi & Honda, Satoshi & Degawa, Tomohiro, 2018. "Development of a propeller-type hollow micro-hydraulic turbine with excellent performance in passing foreign matter," Renewable Energy, Elsevier, vol. 126(C), pages 545-551.
    5. Du, Jiyun & Yang, Hongxing & Shen, Zhicheng & Chen, Jian, 2017. "Micro hydro power generation from water supply system in high rise buildings using pump as turbines," Energy, Elsevier, vol. 137(C), pages 431-440.
    6. Singh, Punit & Nestmann, Franz, 2011. "Experimental investigation of the influence of blade height and blade number on the performance of low head axial flow turbines," Renewable Energy, Elsevier, vol. 36(1), pages 272-281.
    7. Ikeda, Toshihiko & Iio, Shouichiro & Tatsuno, Kenji, 2010. "Performance of nano-hydraulic turbine utilizing waterfalls," Renewable Energy, Elsevier, vol. 35(1), pages 293-300.
    8. Uchiyama, Tomomi & Gu, Qiang & Degawa, Tomohiro & Iio, Shouichiro & Ikeda, Toshihiko & Takamure, Kotaro, 2020. "Numerical simulations of the flow and performance of a hydraulic Savonius turbine by the vortex in cell method with volume penalization," Renewable Energy, Elsevier, vol. 157(C), pages 482-490.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Uchiyama, Tomomi & Gu, Qiang & Degawa, Tomohiro & Iio, Shouichiro & Ikeda, Toshihiko & Takamure, Kotaro, 2020. "Numerical simulations of the flow and performance of a hydraulic Savonius turbine by the vortex in cell method with volume penalization," Renewable Energy, Elsevier, vol. 157(C), pages 482-490.
    2. Uchiyama, Tomomi & Honda, Satoshi & Degawa, Tomohiro, 2018. "Development of a propeller-type hollow micro-hydraulic turbine with excellent performance in passing foreign matter," Renewable Energy, Elsevier, vol. 126(C), pages 545-551.
    3. Jawahar, C.P. & Michael, Prawin Angel, 2017. "A review on turbines for micro hydro power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 882-887.
    4. Laghari, J.A. & Mokhlis, H. & Bakar, A.H.A. & Mohammad, Hasmaini, 2013. "A comprehensive overview of new designs in the hydraulic, electrical equipments and controllers of mini hydro power plants making it cost effective technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 279-293.
    5. Hoghooghi, Hadi & Durali, Mohammad & Kashef, Amin, 2018. "A new low-cost swirler for axial micro hydro turbines of low head potential," Renewable Energy, Elsevier, vol. 128(PA), pages 375-390.
    6. Payambarpour, S. Abdolkarim & Najafi, Amir F. & Magagnato, Franco, 2020. "Investigation of deflector geometry and turbine aspect ratio effect on 3D modified in-pipe hydro Savonius turbine: Parametric study," Renewable Energy, Elsevier, vol. 148(C), pages 44-59.
    7. Yang, Wei & Hou, Yimin & Jia, Huiting & Liu, Benqing & Xiao, Ruofu, 2019. "Lift-type and drag-type hydro turbine with vertical axis for power generation from water pipelines," Energy, Elsevier, vol. 188(C).
    8. Vermaak, Herman Jacobus & Kusakana, Kanzumba & Koko, Sandile Philip, 2014. "Status of micro-hydrokinetic river technology in rural applications: A review of literature," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 625-633.
    9. Ramadan, Mohamad & Murr, Rabih & Khaled, Mahmoud & Olabi, Abdul Ghani, 2018. "Mixed numerical - Experimental approach to enhance the heat pump performance by drain water heat recovery," Energy, Elsevier, vol. 149(C), pages 1010-1021.
    10. Lin, Tong & Zhu, Zuchao & Li, Xiaojun & Li, Jian & Lin, Yanpi, 2021. "Theoretical, experimental, and numerical methods to predict the best efficiency point of centrifugal pump as turbine," Renewable Energy, Elsevier, vol. 168(C), pages 31-44.
    11. Rostami, Ali Bakhshandeh & Armandei, Mohammadmehdi, 2017. "Renewable energy harvesting by vortex-induced motions: Review and benchmarking of technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 193-214.
    12. Kandi, Ali & Meirelles, Gustavo & Brentan, Bruno, 2022. "Employing demand prediction in pump as turbine plant design regarding energy recovery enhancement," Renewable Energy, Elsevier, vol. 187(C), pages 223-236.
    13. Elbatran, A.H. & Ahmed, Yasser M. & Shehata, Ahmed S., 2017. "Performance study of ducted nozzle Savonius water turbine, comparison with conventional Savonius turbine," Energy, Elsevier, vol. 134(C), pages 566-584.
    14. Taimoor Asim & Dharminder Singh & M. Salman Siddiqui & Don McGlinchey, 2022. "Effect of Stator Blades on the Startup Dynamics of a Vertical Axis Wind Turbine," Energies, MDPI, vol. 15(21), pages 1-19, October.
    15. Sinagra, Marco & Aricò, Costanza & Tucciarelli, Tullio & Morreale, Gabriele, 2020. "Experimental and numerical analysis of a backpressure Banki inline turbine for pressure regulation and energy production," Renewable Energy, Elsevier, vol. 149(C), pages 980-986.
    16. Guo, Fen & Song, Baowei & Mao, Zhaoyong & Tian, Wenlong, 2020. "Experimental and numerical validation of the influence on Savonius turbine caused by rear deflector," Energy, Elsevier, vol. 196(C).
    17. Yang, Sun Sheng & Zhao, Erce & Fang, Tian & Kesharwani, Siddhi & Chaudhary, Shubham & Singh, Punit, 2023. "Towards an optimum pitch to chord ratio and establishing its scaling effects in low head Kaplan propellers," Renewable Energy, Elsevier, vol. 204(C), pages 750-772.
    18. Driss, Zied & Mlayeh, Olfa & Driss, Slah & Driss, Dorra & Maaloul, Makram & Abid, Mohamed Salah, 2015. "Study of the bucket design effect on the turbulent flow around unconventional Savonius wind rotors," Energy, Elsevier, vol. 89(C), pages 708-729.
    19. Wong, Kok Hoe & Chong, Wen Tong & Poh, Sin Chew & Shiah, Yui-Chuin & Sukiman, Nazatul Liana & Wang, Chin-Tsan, 2018. "3D CFD simulation and parametric study of a flat plate deflector for vertical axis wind turbine," Renewable Energy, Elsevier, vol. 129(PA), pages 32-55.
    20. Alom, Nur & Saha, Ujjwal K., 2018. "Performance evaluation of vent-augmented elliptical-bladed savonius rotors by numerical simulation and wind tunnel experiments," Energy, Elsevier, vol. 152(C), pages 277-290.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:200:y:2022:i:c:p:146-153. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.