IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v150y2020icp167-175.html
   My bibliography  Save this article

Solar thermal performance of two innovative configurations of air-vacuum layered triple glazed windows

Author

Listed:
  • Fang, Yueping
  • Memon, Saim
  • Peng, Jingqing
  • Tyrer, Mark
  • Ming, Tingzhen

Abstract

This study reports the optimal solar thermal performance of two innovative configurations of air-vacuum layered triple glazed window or Integrated Vacuum Window (IVW). These are when the vacuum layer of IVW is facing the warm or indoor side, i.e. IVWwarm, and when the vacuum layer of IVW is facing the cold or outdoor side, i.e. IVWcold, positions at dynamic solar insolation under winter and summer EN-ISO standard ambient conditions. A theoretically and experimentally validated finite element model is employed. The results show that in winter conditions, although the U-value of IVWwarm of 0.33 Wm−2K−1 is lower than that of IVWcold of 0.49 Wm−2K−1, the IVWcold has a higher solar heat gain. In sunny winter conditions, IVWcold provides higher energy efficiency while in winter night, IVWwarm provides higher energy efficiency than IVWcold. The results show that in summer conditions the U-value of IVWwarm and IVWcold are 0.34 Wm−2K−1 and 0.51 Wm−2K−1 respectively, while IVWwarm provides lower cooling-load and higher energy-efficiency compared to IVWcold. It is concluded that setting the vacuum gap at the indoor side position provides lower cooling-load and higher energy-efficiency compared to setting the vacuum cavity at the outdoor side position in summer ambient conditions.

Suggested Citation

  • Fang, Yueping & Memon, Saim & Peng, Jingqing & Tyrer, Mark & Ming, Tingzhen, 2020. "Solar thermal performance of two innovative configurations of air-vacuum layered triple glazed windows," Renewable Energy, Elsevier, vol. 150(C), pages 167-175.
  • Handle: RePEc:eee:renene:v:150:y:2020:i:c:p:167-175
    DOI: 10.1016/j.renene.2019.12.115
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119319871
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2019.12.115?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Memon, Saim & Fang, Yueping & Eames, Philip C., 2019. "The influence of low-temperature surface induction on evacuation, pump-out hole sealing and thermal performance of composite edge-sealed vacuum insulated glazing," Renewable Energy, Elsevier, vol. 135(C), pages 450-464.
    2. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2016. "Measured thermal performance of a combined suspended particle switchable device evacuated glazing," Applied Energy, Elsevier, vol. 169(C), pages 469-480.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhang, Chengyan & Ji, Jie & Wang, Chuyao & Ke, Wei & Xie, Hao & Yu, Bendong, 2022. "Experimental and numerical studies on the thermal and electrical performance of a CdTe ventilated window integrated with vacuum glazing," Energy, Elsevier, vol. 244(PB).
    2. Yang, Xinpeng & Li, Dong & Yang, Ruitong & Ma, Yuxin & Duan, Yanjiao & Zhang, Chengjun & Hu, Wanyu & Arıcı, Müslüm, 2023. "Parameter global optimization and climatic adaptability analysis of PCM glazed system for long-term application," Renewable Energy, Elsevier, vol. 217(C).
    3. Shanwen Zhang & Min Kong & Saim Memon & Hong Miao & Yanjun Zhang & Sixing Liu, 2020. "Thermal Analysis of a New Neutron Shielding Vacuum Multiple Glass," Sustainability, MDPI, vol. 12(8), pages 1-14, April.
    4. Tan, Yutong & Peng, Jinqing & Luo, Yimo & Gao, Jing & Luo, Zhengyi & Wang, Meng & Curcija, Dragan C., 2022. "Parametric study of venetian blinds for energy performance evaluation and classification in residential buildings," Energy, Elsevier, vol. 239(PD).
    5. Liu, Wenjie & Chow, Tin-tai, 2021. "Performance analysis of liquid-flow-window with submerged heat exchanger," Renewable Energy, Elsevier, vol. 168(C), pages 319-331.
    6. Yangjie Shi & Xiaobo Xi & Yifu Zhang & Haiyang Xu & Jianfeng Zhang & Ruihong Zhang, 2021. "Prediction and Analysis of the Thermal Performance of Composite Vacuum Glazing," Energies, MDPI, vol. 14(18), pages 1-15, September.
    7. Mostafa Ahmed & Ali Radwan & Ahmed Serageldin & Saim Memon & Takao Katsura & Katsunori Nagano, 2020. "Thermal Analysis of a New Sliding Smart Window Integrated with Vacuum Insulation, Photovoltaic, and Phase Change Material," Sustainability, MDPI, vol. 12(19), pages 1-21, September.
    8. Darya Andreeva & Darya Nemova & Evgeny Kotov, 2022. "Multi-Skin Adaptive Ventilated Facade: A Review," Energies, MDPI, vol. 15(9), pages 1-26, May.
    9. Nourozi, Behrouz & Ploskić, Adnan & Chen, Yuxiang & Ning-Wei Chiu, Justin & Wang, Qian, 2020. "Heat transfer model for energy-active windows – An evaluation of efficient reuse of waste heat in buildings," Renewable Energy, Elsevier, vol. 162(C), pages 2318-2329.
    10. Hong Miao & Lingcong Zhang & Sixing Liu & Shanwen Zhang & Saim Memon & Bi Zhu, 2020. "Laser Sealing for Vacuum Plate Glass with PbO-TiO 2 -SiO 2 -RxOy Solder," Sustainability, MDPI, vol. 12(8), pages 1-9, April.
    11. Mesloub, Abdelhakim & Ghosh, Aritra & Touahmia, Mabrouk & Albaqawy, Ghazy Abdullah & Alsolami, Badr M. & Ahriz, Atef, 2022. "Assessment of the overall energy performance of an SPD smart window in a hot desert climate," Energy, Elsevier, vol. 252(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nundy, Srijita & Ghosh, Aritra, 2020. "Thermal and visual comfort analysis of adaptive vacuum integrated switchable suspended particle device window for temperate climate," Renewable Energy, Elsevier, vol. 156(C), pages 1361-1372.
    2. Ghosh, A. & Mallick, T.K., 2018. "Evaluation of colour properties due to switching behaviour of a PDLC glazing for adaptive building integration," Renewable Energy, Elsevier, vol. 120(C), pages 126-133.
    3. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2017. "Effect of sky clearness index on transmission of evacuated (vacuum) glazing," Renewable Energy, Elsevier, vol. 105(C), pages 160-166.
    4. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2016. "Behaviour of a SPD switchable glazing in an outdoor test cell with heat removal under varying weather conditions," Applied Energy, Elsevier, vol. 180(C), pages 695-706.
    5. Krarti, Moncef, 2023. "Optimal optical properties for smart glazed windows applied to residential buildings," Energy, Elsevier, vol. 278(PB).
    6. Mostafa Ahmed & Ali Radwan & Ahmed Serageldin & Saim Memon & Takao Katsura & Katsunori Nagano, 2020. "Thermal Analysis of a New Sliding Smart Window Integrated with Vacuum Insulation, Photovoltaic, and Phase Change Material," Sustainability, MDPI, vol. 12(19), pages 1-21, September.
    7. Sun, Yanyi & Liu, Xin & Ming, Yang & Liu, Xiao & Mahon, Daniel & Wilson, Robin & Liu, Hao & Eames, Philip & Wu, Yupeng, 2021. "Energy and daylight performance of a smart window: Window integrated with thermotropic parallel slat-transparent insulation material," Applied Energy, Elsevier, vol. 293(C).
    8. Ghosh, Aritra & Norton, Brian, 2019. "Optimization of PV powered SPD switchable glazing to minimise probability of loss of power supply," Renewable Energy, Elsevier, vol. 131(C), pages 993-1001.
    9. Shanwen Zhang & Min Kong & Saim Memon & Hong Miao & Yanjun Zhang & Sixing Liu, 2020. "Thermal Analysis of a New Neutron Shielding Vacuum Multiple Glass," Sustainability, MDPI, vol. 12(8), pages 1-14, April.
    10. Ghosh, Aritra & Sundaram, Senthilarasu & Mallick, Tapas K., 2019. "Colour properties and glazing factors evaluation of multicrystalline based semi-transparent Photovoltaic-vacuum glazing for BIPV application," Renewable Energy, Elsevier, vol. 131(C), pages 730-736.
    11. Ghosh, Aritra & Sundaram, Senthilarasu & Mallick, Tapas K., 2018. "Investigation of thermal and electrical performances of a combined semi-transparent PV-vacuum glazing," Applied Energy, Elsevier, vol. 228(C), pages 1591-1600.
    12. Ghosh, Aritra, 2023. "Investigation of vacuum-integrated switchable polymer dispersed liquid crystal glazing for smart window application for less energy-hungry building," Energy, Elsevier, vol. 265(C).
    13. Ghosh, Aritra & Norton, Brian, 2018. "Advances in switchable and highly insulating autonomous (self-powered) glazing systems for adaptive low energy buildings," Renewable Energy, Elsevier, vol. 126(C), pages 1003-1031.
    14. Lyu, Yuan-Li & Liu, Wen-Jie & Su, Hua & Wu, Xuan, 2019. "Numerical analysis on the advantages of evacuated gap insulation of vacuum-water flow window in building energy saving under various climates," Energy, Elsevier, vol. 175(C), pages 353-364.
    15. Hong Miao & Lingcong Zhang & Sixing Liu & Shanwen Zhang & Saim Memon & Bi Zhu, 2020. "Laser Sealing for Vacuum Plate Glass with PbO-TiO 2 -SiO 2 -RxOy Solder," Sustainability, MDPI, vol. 12(8), pages 1-9, April.
    16. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2016. "Measured thermal & daylight performance of an evacuated glazing using an outdoor test cell," Applied Energy, Elsevier, vol. 177(C), pages 196-203.
    17. Barone, Giovanni & Buonomano, Annamaria & Forzano, Cesare & Palombo, Adolfo, 2023. "Multi-objective optimization for comparative energy and economic analyses of a novel evacuated solar collector prototype (ICSSWH) under different weather conditions," Renewable Energy, Elsevier, vol. 210(C), pages 701-714.
    18. Krarti, Moncef, 2022. "Design optimization of smart glazing optical properties for office spaces," Applied Energy, Elsevier, vol. 308(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:150:y:2020:i:c:p:167-175. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.