IDEAS home Printed from https://ideas.repec.org/a/eee/phsmap/v540y2020ics0378437119317534.html
   My bibliography  Save this article

Effects of utilizing nanofluid as working fluid in a lab-scale designed FPSC to improve thermal absorption and efficiency

Author

Listed:
  • Ahmadlouydarab, Majid
  • Ebadolahzadeh, Mohammad
  • Muhammad Ali, Hafiz

Abstract

The significance of using renewable energy has led to huge amount of studies on increasing the efficiency of the systems using these energies. The flat plate solar collector (FPSC) is one of the most common types of these systems. In this experimental study, we have made a change within the structure of a lab-scale flat-plate solar collector, and have increased its efficiency for public use. To this aim, a nanofluid containing TiO2 particles was used as working fluid which does not circulate inside the FPSC. Purified water as the agent fluid was circulating inside the piping system and water storage tank As a direct result, this mechanism increases the FPSC lifetime and reduces the costs compared to that of old versions. Moreover, a layer of N-TiO2 particles was applied on the outer side of the FPSC collector glass surface. This technique improves the self-cleaning properties of the surface, and also enhances the collector thermal efficiency. Studied range for volume fraction of TiO2 particles was from 0.1 % to 5%. The optimum volume fractions of TiO2 particles were utilized to study the collector performance. The measured average diameter of the TiO2 particles was about 20 nm. The nanofluid was prepared using a two-step method and by adding a sodium dodecyl sulfate (SDS) as surfactant. Results indicated that, using the nanofluid as working fluid, the collector efficiency was increased by about 45% and 17% for the volume fractions of 5% and 2.5% of TiO2 nanoparticles, respectively. Besides, an increase in the TiO2 particles volume fraction led to increment in absorbed heat by FPSC. Additionally, effects of initial temperature of tank water i.e. 0 °C, 10 °C, 20 °C, and 30 °C on the thermal efficiency was studied. Increasing the initial temperature showed positive influence on the efficiency. Moreover, regardless of whether the thermal connection is disconnected or connected, the collector does not lose its efficiency.

Suggested Citation

  • Ahmadlouydarab, Majid & Ebadolahzadeh, Mohammad & Muhammad Ali, Hafiz, 2020. "Effects of utilizing nanofluid as working fluid in a lab-scale designed FPSC to improve thermal absorption and efficiency," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 540(C).
    • Handle: RePEc:eee:phsmap:v:540:y:2020:i:c:s0378437119317534
    DOI: 10.1016/j.physa.2019.123109
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378437119317534
    Download Restriction: Full text for ScienceDirect subscribers only. Journal offers the option of making the article available online on Science direct for a fee of $3,000
    File URL: https://libkey.io/10.1016/j.physa.2019.123109?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hussein, Ahmed Kadhim, 2015. "Applications of nanotechnology in renewable energies—A comprehensive overview and understanding," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 460-476.
    2. Farajzadeh, Ehsan & Movahed, Saeid & Hosseini, Reza, 2018. "Experimental and numerical investigations on the effect of Al2O3/TiO2H2O nanofluids on thermal efficiency of the flat plate solar collector," Renewable Energy, Elsevier, vol. 118(C), pages 122-130.
    3. Woobin Kang & Yunchan Shin & Honghyun Cho, 2017. "Economic Analysis of Flat-Plate and U-Tube Solar Collectors Using an Al 2 O 3 Nanofluid," Energies, MDPI, vol. 10(11), pages 1-15, November.
    4. Hussein, Ahmed Kadhim, 2016. "Applications of nanotechnology to improve the performance of solar collectors – Recent advances and overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 767-792.
    5. Yousefi, Tooraj & Veysi, Farzad & Shojaeizadeh, Ehsan & Zinadini, Sirus, 2012. "An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors," Renewable Energy, Elsevier, vol. 39(1), pages 293-298.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ahmadlouydarab, Majid & Anari, Tahereh Dana & Akbarzadeh, Alireza, 2022. "Experimental study on cylindrical and flat plate solar collectors’ thermal efficiency comparison," Renewable Energy, Elsevier, vol. 190(C), pages 848-864.
    2. Tembhare, Saurabh P. & Barai, Divya P. & Bhanvase, Bharat A., 2022. "Performance evaluation of nanofluids in solar thermal and solar photovoltaic systems: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    3. Akbarzadeh, Alireza & Ahmadlouydarab, Majid & Niaei, Aligholi, 2021. "Capabilities of α-Al2O3, γ-Al2O3, and bentonite dry powders used in flat plate solar collector for thermal energy storage," Renewable Energy, Elsevier, vol. 173(C), pages 704-720.
    4. Muzamil Hussain & Syed Khawar Hussain Shah & Uzair Sajjad & Naseem Abbas & Ahsan Ali, 2022. "Recent Developments in Optical and Thermal Performance of Direct Absorption Solar Collectors," Energies, MDPI, vol. 15(19), pages 1-23, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tembhare, Saurabh P. & Barai, Divya P. & Bhanvase, Bharat A., 2022. "Performance evaluation of nanofluids in solar thermal and solar photovoltaic systems: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    2. Barbón, A. & Fernández-Rubiera, J.A. & Martínez-Valledor, L. & Pérez-Fernández, A. & Bayón, L., 2021. "Design and construction of a solar tracking system for small-scale linear Fresnel reflector with three movements," Applied Energy, Elsevier, vol. 285(C).
    3. Sharafeldin, M.A. & Gróf, Gyula, 2019. "Efficiency of evacuated tube solar collector using WO3/Water nanofluid," Renewable Energy, Elsevier, vol. 134(C), pages 453-460.
    4. Akram, Naveed & Montazer, Elham & Kazi, S.N. & Soudagar, Manzoore Elahi M. & Ahmed, Waqar & Zubir, Mohd Nashrul Mohd & Afzal, Asif & Muhammad, Mohd Ridha & Ali, Hafiz Muhammad & Márquez, Fausto Pedro , 2021. "Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids," Energy, Elsevier, vol. 227(C).
    5. Saffarian, Mohammad Reza & Moravej, Mojtaba & Doranehgard, Mohammad Hossein, 2020. "Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid," Renewable Energy, Elsevier, vol. 146(C), pages 2316-2329.
    6. Elsheikh, A.H. & Sharshir, S.W. & Mostafa, Mohamed E. & Essa, F.A. & Ahmed Ali, Mohamed Kamal, 2018. "Applications of nanofluids in solar energy: A review of recent advances," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3483-3502.
    7. Ahmadlouydarab, Majid & Anari, Tahereh Dana & Akbarzadeh, Alireza, 2022. "Experimental study on cylindrical and flat plate solar collectors’ thermal efficiency comparison," Renewable Energy, Elsevier, vol. 190(C), pages 848-864.
    8. Farshad, Seyyed Ali & Sheikholeslami, M., 2019. "Nanofluid flow inside a solar collector utilizing twisted tape considering exergy and entropy analysis," Renewable Energy, Elsevier, vol. 141(C), pages 246-258.
    9. Hussein, Ahmed Kadhim, 2016. "Applications of nanotechnology to improve the performance of solar collectors – Recent advances and overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 767-792.
    10. O'Hegarty, Richard & Kinnane, Oliver & McCormack, Sarah J., 2017. "Concrete solar collectors for façade integration: An experimental and numerical investigation," Applied Energy, Elsevier, vol. 206(C), pages 1040-1061.
    11. Chopra, K. & Tyagi, V.V. & Pandey, A.K. & Sari, Ahmet, 2018. "Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications," Applied Energy, Elsevier, vol. 228(C), pages 351-389.
    12. Soloha, Raimonda & Pakere, Ieva & Blumberga, Dagnija, 2017. "Solar energy use in district heating systems. A case study in Latvia," Energy, Elsevier, vol. 137(C), pages 586-594.
    13. Mahbubul, I.M. & Khan, Mohammed Mumtaz A. & Ibrahim, Nasiru I. & Ali, Hafiz Muhammad & Al-Sulaiman, Fahad A. & Saidur, R., 2018. "Carbon nanotube nanofluid in enhancing the efficiency of evacuated tube solar collector," Renewable Energy, Elsevier, vol. 121(C), pages 36-44.
    14. Bhalla, Vishal & Tyagi, Himanshu, 2018. "Parameters influencing the performance of nanoparticles-laden fluid-based solar thermal collectors: A review on optical properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 12-42.
    15. Seyed Reza Shamshirgaran & Hussain H. Al-Kayiem & Korada V. Sharma & Mostafa Ghasemi, 2020. "State of the Art of Techno-Economics of Nanofluid-Laden Flat-Plate Solar Collectors for Sustainable Accomplishment," Sustainability, MDPI, vol. 12(21), pages 1-52, November.
    16. Coccia, Gianluca & Tomassetti, Sebastiano & Di Nicola, Giovanni, 2021. "Thermal conductivity of nanofluids: A review of the existing correlations and a scaled semi-empirical equation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    17. Abu Shadate Faisal Mahamude & Wan Sharuzi Wan Harun & Kumaran Kadirgama & Devarajan Ramasamy & Kaniz Farhana & Khalid Saleh & Talal Yusaf, 2022. "Experimental Study on the Efficiency Improvement of Flat Plate Solar Collectors Using Hybrid Nanofluids Graphene/Waste Cotton," Energies, MDPI, vol. 15(7), pages 1-27, March.
    18. Qin, Caiyan & Kim, Joong Bae & Lee, Bong Jae, 2019. "Performance analysis of a direct-absorption parabolic-trough solar collector using plasmonic nanofluids," Renewable Energy, Elsevier, vol. 143(C), pages 24-33.
    19. Sundar, L. Syam & Singh, Manoj K. & Punnaiah, V. & Sousa, Antonio C.M., 2018. "Experimental investigation of Al2O3/water nanofluids on the effectiveness of solar flat-plate collectors with and without twisted tape inserts," Renewable Energy, Elsevier, vol. 119(C), pages 820-833.
    20. Tawfik, Mohamed M., 2017. "Experimental studies of nanofluid thermal conductivity enhancement and applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1239-1253.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:phsmap:v:540:y:2020:i:c:s0378437119317534. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/physica-a-statistical-mechpplications/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.