IDEAS home Printed from https://ideas.repec.org/a/eee/matcom/v211y2023icp118-133.html
   My bibliography  Save this article

Numerical study of periodically heated wall effect on natural convection in an enclosure

Author

Listed:
  • Kumar, Anil
  • Rao, Pentyala Srinivasa

Abstract

The present numerical study focuses on sinusoidal heating and aspect ratio effects on heat flow of free convection of fluid inside the enclosure. The side walls are maintained at ambient temperature and the middle horizontal wall that divides the enclosure evenly is heated to sinusoidal temperature and the other horizontal walls are adiabatic. The numerical solution of the transport equations is done by the finite difference method to determine the heat transfer and thermal penetration with respect to aspect ratio, sinusoidal frequency and Rayleigh number. The numerical results of heat and fluid flow in the range of controlled governing parameters such as Rayleigh number (Ra = 105), sinusoidal frequency (1 ⩽N⩽ 4 ) and aspect ratio (0.2 ⩽A⩽ 4) are analysed in terms of streamlines, isotherms, heat penetration length and Nusselt number. It has been found that the 100% thermal penetration in the upper part of the enclosure of the aspect ratio A = 1 is obtained on continuous heating, while in the lower section, the maximum thermal penetration is limited to 98%, which is obtained on non-continuous heating in the enclosure of aspect ratio A = 0.2, 0.5.

Suggested Citation

  • Kumar, Anil & Rao, Pentyala Srinivasa, 2023. "Numerical study of periodically heated wall effect on natural convection in an enclosure," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 211(C), pages 118-133.
    • Handle: RePEc:eee:matcom:v:211:y:2023:i:c:p:118-133
    DOI: 10.1016/j.matcom.2023.01.007
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378475423000083
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.matcom.2023.01.007?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Garoosi, Faroogh & Hoseininejad, Faraz & Rashidi, Mohammad Mehdi, 2016. "Numerical study of natural convection heat transfer in a heat exchanger filled with nanofluids," Energy, Elsevier, vol. 109(C), pages 664-678.
    2. Bouzerzour, Abdeslem & Djezzar, Mahfoud & Oztop, Hakan F. & Tayebi, Tahar & Abu-Hamdeh, Nidal, 2020. "Natural convection in nanofluid filled and partially heated annulus: Effect of different arrangements of heaters," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    3. Azharul Karim & M. Masum Billah & M. T. Talukder Newton & M. Mustafizur Rahman, 2017. "Influence of the Periodicity of Sinusoidal Boundary Condition on the Unsteady Mixed Convection within a Square Enclosure Using an Ag–Water Nanofluid," Energies, MDPI, vol. 10(12), pages 1-21, December.
    4. Hashem Zadeh, S.M. & Sabour, M. & Sazgara, S. & Ghalambaz, M., 2020. "Free convection flow and heat transfer of nanofluids in a cavity with conjugate solid triangular blocks: Employing Buongiorno’s mathematical model," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    5. Karimipour, Arash & Hemmat Esfe, Mohammad & Safaei, Mohammad Reza & Toghraie Semiromi, Davood & Jafari, Saeed & Kazi, S.N., 2014. "Mixed convection of copper–water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 402(C), pages 150-168.
    6. Dadvand, Abdolrahman & Saraei, Sina Hassanzadeh & Ghoreishi, Soheila & Chamkha, Ali J., 2021. "Lattice Boltzmann simulation of natural convection in a square enclosure with discrete heating," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 179(C), pages 265-278.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bahrami, Mehrdad & Akbari, Mohammad & Bagherzadeh, Seyed Amin & Karimipour, Arash & Afrand, Masoud & Goodarzi, Marjan, 2019. "Develop 24 dissimilar ANNs by suitable architectures & training algorithms via sensitivity analysis to better statistical presentation: Measure MSEs between targets & ANN for Fe–CuO/Eg–Water nanofluid," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 519(C), pages 159-168.
    2. Ahmadi Balootaki, Azam & Karimipour, Arash & Toghraie, Davood, 2018. "Nano scale lattice Boltzmann method to simulate the mixed convection heat transfer of air in a lid-driven cavity with an endothermic obstacle inside," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 508(C), pages 681-701.
    3. Ammar I. Alsabery & Tahar Tayebi & Ali J. Chamkha & Ishak Hashim, 2018. "Effects of Non-Homogeneous Nanofluid Model on Natural Convection in a Square Cavity in the Presence of Conducting Solid Block and Corner Heater," Energies, MDPI, vol. 11(10), pages 1-27, September.
    4. Alsarraf, Jalal & Moradikazerouni, Alireza & Shahsavar, Amin & Afrand, Masoud & Salehipour, Hamzeh & Tran, Minh Duc, 2019. "Hydrothermal analysis of turbulent boehmite alumina nanofluid flow with different nanoparticle shapes in a minichannel heat exchanger using two-phase mixture model," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 275-288.
    5. Khaje khabaz, Moahamad & Eftekhari, S. Ali & Hashemian, Mohamad & Toghraie, Davood, 2020. "Optimal vibration control of multi-layer micro-beams actuated by piezoelectric layer based on modified couple stress and surface stress elasticity theories," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).
    6. Hemmat Esfe, Mohammad & Abbasian Arani, Ali Akbar & Esfandeh, Saeed & Afrand, Masoud, 2019. "Proposing new hybrid nano-engine oil for lubrication of internal combustion engines: Preventing cold start engine damages and saving energy," Energy, Elsevier, vol. 170(C), pages 228-238.
    7. Sardar Bilal & Imtiaz Ali Shah & Kaouther Ghachem & Abdelkarim Aydi & Lioua Kolsi, 2023. "Heat Transfer Enhancement of MHD Natural Convection in a Star-Shaped Enclosure, Using Heated Baffle and MWCNT–Water Nanofluid," Mathematics, MDPI, vol. 11(8), pages 1-18, April.
    8. Solangi, K.H. & Kazi, S.N. & Luhur, M.R. & Badarudin, A. & Amiri, A. & Sadri, Rad & Zubir, M.N.M. & Gharehkhani, Samira & Teng, K.H., 2015. "A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids," Energy, Elsevier, vol. 89(C), pages 1065-1086.
    9. Mahyari, Amirhossein Ansari & Karimipour, Arash & Afrand, Masoud, 2019. "Effects of dispersed added Graphene Oxide-Silicon Carbide nanoparticles to present a statistical formulation for the mixture thermal properties," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 98-112.
    10. Afrouzi, Hamid Hassanzadeh & Ahmadian, Majid & Moshfegh, Abouzar & Toghraie, Davood & Javadzadegan, Ashkan, 2019. "Statistical analysis of pulsating non-Newtonian flow in a corrugated channel using Lattice-Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 535(C).
    11. Alnaqi, Abdulwahab A. & Sayyad Tavoos Hal, Sina & Aghaei, Alireza & Soltanimehr, Mehdi & Afrand, Masoud & Nguyen, Truong Khang, 2019. "Predicting the effect of functionalized multi-walled carbon nanotubes on thermal performance factor of water under various Reynolds number using artificial neural network," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 493-500.
    12. Shahsavar, Amin & Bagherzadeh, Seyed Amin & Mahmoudi, Boshra & Hajizadeh, Ahmad & Afrand, Masoud & Nguyen, Truong Khang, 2019. "Robust Weighted Least Squares Support Vector Regression algorithm to estimate the nanofluid thermal properties of water/graphene Oxide–Silicon carbide mixture," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 1418-1428.
    13. Hassanzadeh Afrouzi, Hamid & Moshfegh, Abouzar & Farhadi, Mousa & Sedighi, Kurosh, 2018. "Dissipative particle dynamics: Effects of thermostating schemes on nano-colloid electrophoresis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 497(C), pages 285-301.
    14. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2020. "The use of barocaloric effect for energy saving in a domestic refrigerator with ethylene-glycol based nanofluids: A numerical analysis and a comparison with a vapor compression cooler," Energy, Elsevier, vol. 190(C).
    15. Bohacek, Jan & Raudensky, Miroslav & Astrouski, Ilya & Karimi-Sibaki, Ebrahim, 2021. "An optimal design for hollow fiber heat exchanger: A combined numerical and experimental investigation," Energy, Elsevier, vol. 229(C).
    16. Xiaohong, Dai & Huajiang, Chen & Bagherzadeh, Seyed Amin & Shayan, Masoud & Akbari, Mohammad, 2020. "Statistical estimation the thermal conductivity of MWCNTs-SiO2/Water-EG nanofluid using the ridge regression method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    17. Toghraie, Davood & Karimipour, Arash & Safaei, Mohammad Reza & Goodarzi, Marjan & Alipour, Habibollah & Dahari, Mahidzal, 2016. "Investigation of rib's height effect on heat transfer and flow parameters of laminar water–Al2O3 nanofluid in a rib-microchannelAuthor-Name: Akbari, Omid Ali," Applied Mathematics and Computation, Elsevier, vol. 290(C), pages 135-153.
    18. Ghasemi, Ali & Hassani, Mohsen & Goodarzi, Marjan & Afrand, Masoud & Manafi, Sahebali, 2019. "Appraising influence of COOH-MWCNTs on thermal conductivity of antifreeze using curve fitting and neural network," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 514(C), pages 36-45.
    19. Karimipour, Arash & D’Orazio, Annunziata & Goodarzi, Marjan, 2018. "Develop the lattice Boltzmann method to simulate the slip velocity and temperature domain of buoyancy forces of FMWCNT nanoparticles in water through a micro flow imposed to the specified heat flux," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 729-745.
    20. Bagherzadeh, Seyed Amin & D’Orazio, Annunziata & Karimipour, Arash & Goodarzi, Marjan & Bach, Quang-Vu, 2019. "A novel sensitivity analysis model of EANN for F-MWCNTs–Fe3O4/EG nanofluid thermal conductivity: Outputs predicted analytically instead of numerically to more accuracy and less costs," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 406-415.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:matcom:v:211:y:2023:i:c:p:118-133. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/mathematics-and-computers-in-simulation/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.