IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v71y2014icp21-31.html
   My bibliography  Save this article

Thermal modeling of a novel thermosyphonic waste heat absorption system for internal combustion engines

Author

Listed:
  • Nwosu, Paul Nwachukwu
  • Nuutinen, Mika
  • Larmi, Martti

Abstract

This paper investigates a thermal system that absorbs waste heat from an internal combustion (IC) engine in order to raise the temperature of a working fluid to a saturated state using thermosyphonic flow, non-intrusive of the engine operations. The absorbed heat is rejected to an enclosed space, suitable for in-transit drying. The thermal system comprises a cross-flow heat exchanger connected to a radiator which preheats the working fluid from an insulated (storage) tank. The preheated fluid flows through a radiant heat absorber which absorbs radiant heat from the exhaust manifold. To ensure that the system efficiently performs, a temperature differential is maintained by the heated space while the fluid is cyclically delivered to the tank. The system’s operations are described using a novel flow cycle, and the results indicate a significant heat recovery potential.

Suggested Citation

  • Nwosu, Paul Nwachukwu & Nuutinen, Mika & Larmi, Martti, 2014. "Thermal modeling of a novel thermosyphonic waste heat absorption system for internal combustion engines," Energy, Elsevier, vol. 71(C), pages 21-31.
  • Handle: RePEc:eee:energy:v:71:y:2014:i:c:p:21-31
    DOI: 10.1016/j.energy.2014.03.091
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544214003557
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2014.03.091?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nwosu, Nwachukwu P., 2010. "Employing exergy-optimized pin fins in the design of an absorber in a solar air heater," Energy, Elsevier, vol. 35(2), pages 571-575.
    2. Ghazikhani, Mohsen & Hatami, Mohammad & Ganji, Davood Domiri & Gorji-Bandpy, Mofid & Behravan, Ali & Shahi, Gholamreza, 2014. "Exergy recovery from the exhaust cooling in a DI diesel engine for BSFC reduction purposes," Energy, Elsevier, vol. 65(C), pages 44-51.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Liang-Chen & Chang, Li-Ming & Wang, Liang-Bi & Song, Ke-Wei & Zhang, Yong-Heng & Wu, Xiang & Lin, Zhi-Min, 2014. "Analysis of the reusability of the energy of the exhaust gas from the calciner for the production of carbon," Energy, Elsevier, vol. 78(C), pages 439-450.
    2. Łopata, Stanisław & Ocłoń, Paweł, 2015. "Numerical study of the effect of fouling on local heat transfer conditions in a high-temperature fin-and-tube heat exchanger," Energy, Elsevier, vol. 92(P1), pages 100-116.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Baloyi, J. & Bello-Ochende, T. & Meyer, J.P., 2014. "Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bed adiabatic combustor," Energy, Elsevier, vol. 70(C), pages 653-663.
    2. Oztop, Hakan F. & Bayrak, Fatih & Hepbasli, Arif, 2013. "Energetic and exergetic aspects of solar air heating (solar collector) systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 59-83.
    3. Agudelo, Andrés F. & García-Contreras, Reyes & Agudelo, John R. & Armas, Octavio, 2016. "Potential for exhaust gas energy recovery in a diesel passenger car under European driving cycle," Applied Energy, Elsevier, vol. 174(C), pages 201-212.
    4. Mwesigye, Aggrey & Bello-Ochende, Tunde & Meyer, Josua P., 2014. "Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios," Energy, Elsevier, vol. 73(C), pages 606-617.
    5. Jena, Jibanananda & Misra, Rahul Dev, 2014. "Effect of fuel oxygen on the energetic and exergetic efficiency of a compression ignition engine fuelled separately with palm and karanja biodiesels," Energy, Elsevier, vol. 68(C), pages 411-419.
    6. Ağbulut, Ümit & Yeşilyurt, Murat Kadir & Sarıdemir, Suat, 2021. "Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol – A detailed assessment on the combustion, emission, and perform," Energy, Elsevier, vol. 222(C).
    7. Taghavifar, Hadi & Khalilarya, Shahram & Jafarmadar, Samad, 2015. "Exergy analysis of combustion in VGT-modified diesel engine with detailed chemical kinetics mechanism," Energy, Elsevier, vol. 93(P1), pages 740-748.
    8. El-Sebaii, A.A. & Aboul-Enein, S. & Ramadan, M.R.I. & Shalaby, S.M. & Moharram, B.M., 2011. "Thermal performance investigation of double pass-finned plate solar air heater," Applied Energy, Elsevier, vol. 88(5), pages 1727-1739, May.
    9. Hedayatizadeh, Mahdi & Sarhaddi, Faramarz & Safavinejad, Ali & Ranjbar, Faramarz & Chaji, Hossein, 2016. "Exergy loss-based efficiency optimization of a double-pass/glazed v-corrugated plate solar air heater," Energy, Elsevier, vol. 94(C), pages 799-810.
    10. Farzaneh-Gord, Mahmood & Niazmand, Amir & Deymi-Dashtebayaz, Mahdi & Rahbari, Hamid Reza, 2015. "Effects of natural gas compositions on CNG (compressed natural gas) reciprocating compressors performance," Energy, Elsevier, vol. 90(P1), pages 1152-1162.
    11. Sertkaya, Ahmet Ali & Bilir, Şefik & Kargıcı, Suna, 2011. "Experimental investigation of the effects of orientation angle on heat transfer performance of pin-finned surfaces in natural convection," Energy, Elsevier, vol. 36(3), pages 1513-1517.
    12. Kaluri, Ram Satish & Basak, Tanmay, 2011. "Entropy generation due to natural convection in discretely heated porous square cavities," Energy, Elsevier, vol. 36(8), pages 5065-5080.
    13. Razmara, M. & Bidarvatan, M. & Shahbakhti, M. & Robinett, R.D., 2016. "Optimal exergy-based control of internal combustion engines," Applied Energy, Elsevier, vol. 183(C), pages 1389-1403.
    14. Nidhul, Kottayat & Yadav, Ajay Kumar & Anish, S. & Kumar, Sachin, 2021. "Critical review of ribbed solar air heater and performance evaluation of various V-rib configuration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 142(C).
    15. Chintala, Venkateswarlu & Subramanian, K.A., 2014. "Assessment of maximum available work of a hydrogen fueled compression ignition engine using exergy analysis," Energy, Elsevier, vol. 67(C), pages 162-175.
    16. Jain, Akshay & Bora, Bhaskor Jyoti & Kumar, Rakesh & Sharma, Prabhakar & Deka, Hiranya, 2023. "Theoretical potential estimation and multi-objective optimization of Water Hyacinth (Eichhornia Crassipes) biodiesel powered diesel engine at variable injection timings," Renewable Energy, Elsevier, vol. 206(C), pages 514-530.
    17. Han, Dong & Zhai, Jiaqi & Duan, Yaozong & Wang, Chunhai & Huang, Zhen, 2018. "Nozzle effects on the injection characteristics of diesel and gasoline blends on a common rail system," Energy, Elsevier, vol. 153(C), pages 223-230.
    18. Ust, Yasin & Arslan, Feyyaz & Ozsari, Ibrahim & Cakir, Mehmet, 2015. "Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria," Energy, Elsevier, vol. 90(P1), pages 552-559.
    19. Aghbashlo, Mortaza & Shamshirband, Shahaboddin & Tabatabaei, Meisam & Yee, Por Lip & Larimi, Yaser Nabavi, 2016. "The use of ELM-WT (extreme learning machine with wavelet transform algorithm) to predict exergetic performance of a DI diesel engine running on diesel/biodiesel blends containing polymer waste," Energy, Elsevier, vol. 94(C), pages 443-456.
    20. Magno, Agnese & Mancaruso, Ezio & Vaglieco, Bianca Maria, 2015. "Effects of both blended and pure biodiesel on waste heat recovery potentiality and exhaust emissions of a small CI (compression ignition) engine," Energy, Elsevier, vol. 86(C), pages 661-671.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:71:y:2014:i:c:p:21-31. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.