IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v55y2013icp5-14.html
   My bibliography  Save this article

Applying exergy and total site analysis for targeting refrigeration shaft power in industrial clusters

Author

Listed:
  • Hackl, Roman
  • Harvey, Simon

Abstract

Process cooling below ambient temperature is an energy demanding part of many chemical production processes. Compression refrigeration systems operating at very low temperatures consume a lot of high quality utility such as electricity or high pressure steam to drive the compressor units. In industrial process clusters with several processes operating at low temperatures, it is important to investigate opportunities for exchange of low-temperature energy between processes. This paper demonstrates how total site analysis and exergy analysis can be applied to target for shaft power and related hot utility savings for processes and utility systems operating below ambient temperature. Shaft power targeting by optimizing refrigerant use is conducted. In addition the methodology is extended for shaft power targeting in connection with site-wide heat recovery from cold process streams to generate sub-ambient utility.

Suggested Citation

  • Hackl, Roman & Harvey, Simon, 2013. "Applying exergy and total site analysis for targeting refrigeration shaft power in industrial clusters," Energy, Elsevier, vol. 55(C), pages 5-14.
    • Handle: RePEc:eee:energy:v:55:y:2013:i:c:p:5-14
    DOI: 10.1016/j.energy.2013.03.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421300217X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.03.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Panjeshahi, M.H. & Ghasemian Langeroudi, E. & Tahouni, N., 2008. "Retrofit of ammonia plant for improving energy efficiency," Energy, Elsevier, vol. 33(1), pages 46-64.
    2. Hackl, Roman & Andersson, Eva & Harvey, Simon, 2011. "Targeting for energy efficiency and improved energy collaboration between different companies using total site analysis (TSA)," Energy, Elsevier, vol. 36(8), pages 4609-4615.
    3. Fábrega, F.M. & Rossi, J.S. & d'Angelo, J.V.H., 2010. "Exergetic analysis of the refrigeration system in ethylene and propylene production process," Energy, Elsevier, vol. 35(3), pages 1224-1231.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Miroslav Variny & Kristián Hanus & Marek Blahušiak & Patrik Furda & Peter Illés & Ján Janošovský, 2021. "Energy and Environmental Assessment of Steam Management Optimization in an Ethylene Plant," IJERPH, MDPI, vol. 18(22), pages 1-17, November.
    2. Haragovics, Máté & Mizsey, Péter, 2014. "A novel application of exergy analysis: Lean manufacturing tool to improve energy efficiency and flexibility of hydrocarbon processing," Energy, Elsevier, vol. 77(C), pages 382-390.
    3. Morandin, Matteo & Hackl, Roman & Harvey, Simon, 2014. "Economic feasibility of district heating delivery from industrial excess heat: A case study of a Swedish petrochemical cluster," Energy, Elsevier, vol. 65(C), pages 209-220.
    4. Matsuda, Kazuo & Hirochi, Yoshiichi & Kurosaki, Daisuke & Kado, Yosuke, 2015. "Area-wide energy saving program in a large industrial area," Energy, Elsevier, vol. 90(P1), pages 89-94.
    5. Bungener, Stephane & Hackl, Roman & Van Eetvelde, Greet & Harvey, Simon & Marechal, Francois, 2015. "Multi-period analysis of heat integration measures in industrial clusters," Energy, Elsevier, vol. 93(P1), pages 220-234.
    6. Zhang, Bing J. & Tang, Qiao Q. & Zhao, Yue & Chen, Yu Q. & Chen, Qing L. & Floudas, Christodoulos A., 2018. "Multi-level energy integration between units, plants and sites for natural gas industrial parks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 1-15.
    7. Mehdizadeh, Fariba & Tahouni, Nassim & Panjeshahi, M. Hassan, 2022. "Total site exergy analysis, using a new conceptual method," Energy, Elsevier, vol. 250(C).
    8. Gharagheizi, Farhad & Ilani-Kashkouli, Poorandokht & Mohammadi, Amir H. & Ramjugernath, Deresh, 2014. "A group contribution method for determination of the standard molar chemical exergy of organic compounds," Energy, Elsevier, vol. 70(C), pages 288-297.
    9. Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Walmsley, Timothy G. & Jia, Xuexiu, 2018. "New directions in the implementation of Pinch Methodology (PM)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 439-468.
    10. Wallerand, Anna S. & Kermani, Maziar & Kantor, Ivan & Maréchal, François, 2018. "Optimal heat pump integration in industrial processes," Applied Energy, Elsevier, vol. 219(C), pages 68-92.
    11. Wang, Yufei & Chang, Chenglin & Feng, Xiao, 2015. "A systematic framework for multi-plants Heat Integration combining Direct and Indirect Heat Integration methods," Energy, Elsevier, vol. 90(P1), pages 56-67.
    12. Sanavandi, Hamid & Mafi, Mostafa & Ziabasharhagh, Masoud, 2019. "Normalized sensitivity analysis of LNG processes - Case studies: Cascade and single mixed refrigerant systems," Energy, Elsevier, vol. 188(C).
    13. Back, Jaime André & Tedesco, Leonel Pablo & Molz, Rolf Fredi & Nara, Elpidio Oscar Benitez, 2016. "An embedded system approach for energy monitoring and analysis in industrial processes," Energy, Elsevier, vol. 115(P1), pages 811-819.
    14. Hackl, Roman & Harvey, Simon, 2013. "Framework methodology for increased energy efficiency and renewable feedstock integration in industrial clusters," Applied Energy, Elsevier, vol. 112(C), pages 1500-1509.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sardarmehni, Mojtaba & Tahouni, Nassim & Panjeshahi, M. Hassan, 2017. "Benchmarking of olefin plant cold-end for shaft work consumption, using process integration concepts," Energy, Elsevier, vol. 127(C), pages 623-633.
    2. Chen, Yuhong & Lyu, Yanfeng & Yang, Xiangdong & Zhang, Xiaohong & Pan, Hengyu & Wu, Jun & Lei, Yongjia & Zhang, Yanzong & Wang, Guiyin & Xu, Min & Luo, Hongbin, 2022. "Performance comparison of urea production using one set of integrated indicators considering energy use, economic cost and emissions’ impacts: A case from China," Energy, Elsevier, vol. 254(PC).
    3. Varbanov, Petar Sabev & Fodor, Zsófia & Klemeš, Jiří Jaromír, 2012. "Total Site targeting with process specific minimum temperature difference (ΔTmin)," Energy, Elsevier, vol. 44(1), pages 20-28.
    4. Francisco Amaral & Alex Santos & Ewerton Calixto & Fernando Pessoa & Delano Santana, 2020. "Exergetic Evaluation of an Ethylene Refrigeration Cycle," Energies, MDPI, vol. 13(14), pages 1-21, July.
    5. Michalsky, Ronald & Parman, Bryon J. & Amanor-Boadu, Vincent & Pfromm, Peter H., 2012. "Solar thermochemical production of ammonia from water, air and sunlight: Thermodynamic and economic analyses," Energy, Elsevier, vol. 42(1), pages 251-260.
    6. Wu, Xi & Yang, Zhao & Wang, Xiaoming & Lin, Yulong, 2013. "Experimental and theoretical study on the influence of temperature and humidity on the flammability limits of ethylene (R1150)," Energy, Elsevier, vol. 52(C), pages 185-191.
    7. Bungener, Stephane & Hackl, Roman & Van Eetvelde, Greet & Harvey, Simon & Marechal, Francois, 2015. "Multi-period analysis of heat integration measures in industrial clusters," Energy, Elsevier, vol. 93(P1), pages 220-234.
    8. Kachacha, Christina & Zoughaib, Assaad & Tran, Cong Toan, 2018. "A methodology for the flexibility assessment of site wide heat integration scenarios," Energy, Elsevier, vol. 154(C), pages 231-239.
    9. Hür Bütün & Ivan Kantor & François Maréchal, 2019. "Incorporating Location Aspects in Process Integration Methodology," Energies, MDPI, vol. 12(17), pages 1-45, August.
    10. Flórez-Orrego, Daniel & de Oliveira Junior, Silvio, 2016. "On the efficiency, exergy costs and CO2 emission cost allocation for an integrated syngas and ammonia production plant," Energy, Elsevier, vol. 117(P2), pages 341-360.
    11. Haragovics, Máté & Mizsey, Péter, 2014. "A novel application of exergy analysis: Lean manufacturing tool to improve energy efficiency and flexibility of hydrocarbon processing," Energy, Elsevier, vol. 77(C), pages 382-390.
    12. Morandin, Matteo & Hackl, Roman & Harvey, Simon, 2014. "Economic feasibility of district heating delivery from industrial excess heat: A case study of a Swedish petrochemical cluster," Energy, Elsevier, vol. 65(C), pages 209-220.
    13. Jamaluddin, Khairulnadzmi & Wan Alwi, Sharifah Rafidah & Abd Manan, Zainuddin & Hamzah, Khaidzir & Klemeš, Jiří Jaromír, 2022. "Design of Total Site-Integrated TrigenerationSystem using trigeneration cascade analysis considering transmission losses and sensitivity analysis," Energy, Elsevier, vol. 252(C).
    14. Flórez-Orrego, Daniel & de Oliveira Junior, Silvio, 2017. "Modeling and optimization of an industrial ammonia synthesis unit: An exergy approach," Energy, Elsevier, vol. 137(C), pages 234-250.
    15. Kiraly, Annamaria & Pahor, Bojan & Kravanja, Zdravko, 2013. "Achieving energy self-sufficiency by integrating renewables into companies' supply networks," Energy, Elsevier, vol. 55(C), pages 46-57.
    16. Huang, Kefeng & Karimi, I.A., 2016. "Work-heat exchanger network synthesis (WHENS)," Energy, Elsevier, vol. 113(C), pages 1006-1017.
    17. Jahromi, Farid Sadeghian & Beheshti, Masoud & Rajabi, Razieh Fereydon, 2018. "Comparison between differential evolution algorithms and response surface methodology in ethylene plant optimization based on an extended combined energy - exergy analysis," Energy, Elsevier, vol. 164(C), pages 1114-1134.
    18. Hackl, Roman & Harvey, Simon, 2013. "Framework methodology for increased energy efficiency and renewable feedstock integration in industrial clusters," Applied Energy, Elsevier, vol. 112(C), pages 1500-1509.
    19. Mei-Ling, Zheng & Wen, Wang, 2010. "Seasonal energy utilization optimization in an enterprise," Energy, Elsevier, vol. 35(9), pages 3932-3940.
    20. Longyu Shi & Lingyu Liu & Bin Yang & Gonghan Sheng & Tong Xu, 2020. "Evaluation of Industrial Urea Energy Consumption (EC) Based on Life Cycle Assessment (LCA)," Sustainability, MDPI, vol. 12(9), pages 1-17, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:55:y:2013:i:c:p:5-14. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.