IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v309y2024ics0360544224028019.html
   My bibliography  Save this article

Unsteady vane-rotor secondary flow interaction of the endwall region in a 1.5-stage variable-geometry turbine

Author

Listed:
  • Huo, Dongchen
  • Fang, Xinglong
  • Gao, Jie
  • Liao, Yunan
  • Jiang, Zhenyu

Abstract

Variable-geometry turbines present significant improvements in both off-design cycle efficiency and enhanced engine responsiveness for future adaptive cycle engines. The adjustable vanes regulate the through-flow capacity by varying the installation angle and thus unavoidably require endwall clearance, resulting in profound implications for vane and downstream blade rows. Unsteady numerical simulations are carried out to investigate the vane-rotor flow interaction under the zero and partial clearance type of the adjustable vane in a 1.5-stage variable-geometry turbine. First, specific vortical structures and loss characteristics of upstream adjustable vane leakage flow at turning angles of −5°, 0°, and +5° are described. Then, the basic mechanisms of vane-rotor secondary flow interaction between acquired upstream leakage flow and downstream blade rows secondary flow is explored by the time-resolved method and quantitative detailed analysis method. The results show that adjustable vane vortex core area is the primary cause of internal loss within the vortex, and the mixing and interaction between the leakage vortex and other vortex systems contribute to secondary loss in the vane. Due to the downstream blade shear action caused by different flow velocity on the suction and pressure surfaces, the vane leakage flow fragments upon entering the R1 blade passage and develops downstream of the endwall region. Compared to the vane with zero clearance case at same turning angle, the intensity of the R1 tip leakage vortex at the design turning angle and open turning angle is reduced by 47.4 % and 23.66 % with the upstream partial clearance, respectively. The unsteady vane-rotor secondary flow interaction under different turning angles has large influence on the flow structure and loss characteristics of the downstream blade rows, and results in significant differences in the variation pattern and trend direction of the turbine performance.

Suggested Citation

  • Huo, Dongchen & Fang, Xinglong & Gao, Jie & Liao, Yunan & Jiang, Zhenyu, 2024. "Unsteady vane-rotor secondary flow interaction of the endwall region in a 1.5-stage variable-geometry turbine," Energy, Elsevier, vol. 309(C).
    • Handle: RePEc:eee:energy:v:309:y:2024:i:c:s0360544224028019
    DOI: 10.1016/j.energy.2024.133027
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224028019
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.133027?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Touil, Kaddour & Ghenaiet, Adel, 2019. "Simulation and analysis of vane-blade interaction in a two-stage high-pressure axial turbine," Energy, Elsevier, vol. 172(C), pages 1291-1311.
    2. Guan, Yin & Li, Wen & Zhu, Yangli & Wang, Xing & Zhang, Yifeng & Chen, Haisheng, 2024. "Aerodynamic performance and flow field losses analysis: A study on nozzle governing turbine with varied regulated nozzle stator installation angle," Energy, Elsevier, vol. 300(C).
    3. Nguyen, Duc-Anh & Kim, Jin-Hyuk, 2024. "Co-adjustable guide vane and diffuser vane to improve the energy generation potential of an axial-flow pump as turbine," Energy, Elsevier, vol. 291(C).
    4. Gu, Chun-wei & Wang, Hao & Ji, Xing-xing & Li, Xue-song, 2016. "Development and application of a thermodynamic-cycle performance analysis method of a three-shaft gas turbine," Energy, Elsevier, vol. 112(C), pages 307-321.
    5. Zhang, Longxin & Wang, Songtao & Hu, Site, 2024. "Role of tip leakage flow in an ultra-highly loaded transonic rotor aerodynamics," Energy, Elsevier, vol. 286(C).
    6. Aygun, Hakan & Cilgin, Mehmet Emin & Ekmekci, Ismail & Turan, Onder, 2020. "Energy and performance optimization of an adaptive cycle engine for next generation combat aircraft," Energy, Elsevier, vol. 209(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Busheng & Xuan, Yimin, 2023. "An integrated model for energy management of aero engines based on thermodynamic principle of variable mass systems," Energy, Elsevier, vol. 276(C).
    2. Aygun, Hakan, 2022. "Thermodynamic, environmental and sustainability calculations of a conceptual turboshaft engine under several power settings," Energy, Elsevier, vol. 245(C).
    3. Park, Yeseul & Choi, Minsung & Choi, Gyungmin, 2023. "Thermodynamic performance study of large-scale industrial gas turbine with methane/ammonia/hydrogen blended fuels," Energy, Elsevier, vol. 282(C).
    4. Thanh Dam Mai & Jaiyoung Ryu, 2020. "Effects of Leading-Edge Modification in Damaged Rotor Blades on Aerodynamic Characteristics of High-Pressure Gas Turbine," Mathematics, MDPI, vol. 8(12), pages 1-21, December.
    5. Park, Yeseul & Choi, Minsung & Kim, Dongmin & Lee, Joongsung & Choi, Gyungmin, 2021. "Performance analysis of large-scale industrial gas turbine considering stable combustor operation using novel blended fuel," Energy, Elsevier, vol. 236(C).
    6. Gong, Wenbin & Lei, Zhao & Nie, Shunpeng & Liu, Gaowen & Lin, Aqiang & Feng, Qing & Wang, Zhiwu, 2023. "A novel combined model for energy consumption performance prediction in the secondary air system of gas turbine engines based on flow resistance network," Energy, Elsevier, vol. 280(C).
    7. Aygun, Hakan & Erkara, Seref & Turan, Onder, 2022. "Comprehensive exergo- sustainability analysis for a next generation aero engine," Energy, Elsevier, vol. 239(PD).
    8. Zhen, Man & Dong, Xuezhi & Shao, Dong & Liu, Xiyang & Tan, Chunqing, 2024. "Research on high fidelity modelling and optimum designing of an adaptive cycle engine's starting process," Energy, Elsevier, vol. 294(C).
    9. Jia, Xingyun & Zhou, Dengji, 2024. "Multi-variable anti-disturbance controller with state-dependent switching law for adaptive cycle engine," Energy, Elsevier, vol. 288(C).
    10. ZhiTan Liu & XiaoDong Ren & ZhiYuan Yan & HongFei Zhu & Tao Zhang & Wei Zhu & XueSong Li, 2019. "Effect of Inlet Air Heating on Gas Turbine Efficiency under Partial Load," Energies, MDPI, vol. 12(17), pages 1-11, August.
    11. Wang, Busheng & Xuan, Yimin, 2024. "Heuristic deepening of aero engine performance analysis model based on thermodynamic principle of variable mass system," Energy, Elsevier, vol. 306(C).
    12. Kagan Ayaz, S. & Caliskan, Hakan & Altuntas, Onder, 2023. "Environmental and second law analysis of a turbojet engine operating with different fuels," Energy, Elsevier, vol. 285(C).
    13. Luo, Qiaodan & Zhao, Shengfeng & Zhou, Shiji & Wang, Haoran & Yao, Lipan & Yang, Chengwu & Lu, Xingen & Zhu, Junqiang, 2024. "Effect of double bypass conditions on the thermodynamic characteristics and internal flow mechanisms in a variable core cycle compression system," Energy, Elsevier, vol. 304(C).
    14. Cheng, Xianda & Zheng, Haoran & Dong, Wei & Yang, Xuesen, 2023. "Performance prediction of marine intercooled cycle gas turbine based on expanded similarity parameters," Energy, Elsevier, vol. 265(C).
    15. Zhou, Kai & Zheng, Xinqian, 2022. "Novel wave-shaped tip-shroud contours towards reducing turbine leakage loss," Energy, Elsevier, vol. 254(PA).
    16. Wen, Jie & Wan, Chenxi & Xu, Guoqiang & Zhuang, Laihe & Dong, Bensi & Chen, Junjie, 2024. "Optimization of thermal management system architecture in hydrogen engine employing improved genetic algorithm," Energy, Elsevier, vol. 297(C).
    17. Balli, Ozgur & Caliskan, Hakan, 2021. "Turbofan engine performances from aviation, thermodynamic and environmental perspectives," Energy, Elsevier, vol. 232(C).
    18. Zhao, Wei & Huang, Chen & Zhao, Qingjun & Ma, Yingqun & Xu, Jianzhong, 2018. "Performance analysis of a pre-cooled and fuel-rich pre-burned mixed-flow turbofan cycle for high speed vehicles," Energy, Elsevier, vol. 154(C), pages 96-109.
    19. Balli, Ozgur & Karakoc, T. Hikmet, 2022. "Exergetic, exergoeconomic, exergoenvironmental damage cost and impact analyses of an aircraft turbofan engine(ATFE)," Energy, Elsevier, vol. 256(C).
    20. Cai, Changpeng & Zheng, Qiangang & Wang, Yong & Chen, Haoying & Zhang, Haibo, 2024. "Predictive control method for mode transition process of multi-mode turbine engine based on onboard adaptive composite model," Energy, Elsevier, vol. 302(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:309:y:2024:i:c:s0360544224028019. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.