IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v284y2023ics0360544223027639.html
   My bibliography  Save this article

Optimized geometric designs of desiccant wheels with metal-organic frameworks considering dehumidification capacity and energy

Author

Listed:
  • Park, Myeong Hyeon
  • Chung, Jun Yeob
  • Hong, Seong Ho
  • Shin, Hyun Ho
  • Lee, Dongchan
  • Kim, Yongchan

Abstract

With the increasing demand for handling dehumidification loads and energy savings in air-conditioning systems, solid-desiccant dehumidification systems have been implemented in passive and zero-energy buildings. Although novel metal-organic frameworks (MOFs) have been introduced to improve the performance of desiccant wheels, previous studies have mainly focused on silica gel-based desiccant rotors (DRs). This study aimed to optimize the geometric design of MOF DRs to achieve enhanced dehumidification and energy performance. A numerical model for estimating the performance characteristics of MOF DRs was developed using the adsorption isotherm curves measured in this study. The numerical model was validated by comparing the predictions with the experimental data. The dehumidification and energy performance of the MOF DRs were analyzed in terms of the coating amount, channel pitch, rotor thickness, and process-regeneration area ratio. Accordingly, the optimized geometric designs of the MOF DRs were determined to achieve the maximum dehumidification capacity and minimum energy consumption. Compared to the baseline MOF DR, the capacity-optimized MOF DR exhibited a 47.4 % higher moisture removal capacity, whereas the energy-optimized MOF DR exhibited a 48.6 % lower sensible energy ratio.

Suggested Citation

  • Park, Myeong Hyeon & Chung, Jun Yeob & Hong, Seong Ho & Shin, Hyun Ho & Lee, Dongchan & Kim, Yongchan, 2023. "Optimized geometric designs of desiccant wheels with metal-organic frameworks considering dehumidification capacity and energy," Energy, Elsevier, vol. 284(C).
    • Handle: RePEc:eee:energy:v:284:y:2023:i:c:s0360544223027639
    DOI: 10.1016/j.energy.2023.129369
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223027639
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129369?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Low, Elaine & Huang, Si-Min & Yang, Minlin & Show, Pau Loke & Law, Chung Lim, 2021. "Design of cascade analysis for renewable and waste heat recovery in a solar thermal regeneration unit of a liquid desiccant dehumidification system," Energy, Elsevier, vol. 235(C).
    2. Chang, Jinwei & Li, Zhi & Huang, Yan & Yu, Xiaonan & Jiang, Ruicheng & Huang, Rui & Yu, Xiaoli, 2022. "Multi-objective optimization of a novel combined cooling, dehumidification and power system using improved M-PSO algorithm," Energy, Elsevier, vol. 239(PE).
    3. Kang, Hyungmook & Choi, Sun & Lee, Dae-Young, 2018. "Analytic solution to predict the outlet air states of a desiccant wheel with an arbitrary split ratio," Energy, Elsevier, vol. 153(C), pages 301-310.
    4. Chen, Chih-Hao & Hsu, Chien-Yeh & Chen, Chih-Chieh & Chiang, Yuan-Ching & Chen, Sih-Li, 2016. "Silica gel/polymer composite desiccant wheel combined with heat pump for air-conditioning systems," Energy, Elsevier, vol. 94(C), pages 87-99.
    5. Qu, Ke & Barreto, Germilly & Iten, Muriel & Wang, Yuhao & Riffat, Saffa, 2023. "Energy and thermal performance of optimised hollow fibre liquid desiccant cooling and dehumidification systems in mediterranean regions: Modelling, validation and case study," Energy, Elsevier, vol. 263(PC).
    6. Wu, Dongxu & Cui, Qi & Gao, Yuanzhi & Dai, Zhaofeng & Chen, Bo & Wang, Changling & Zhang, Xiaosong, 2022. "Study on the performance of solar interfacial evaporation for high-efficiency liquid desiccant regeneration," Energy, Elsevier, vol. 257(C).
    7. Kang, Hyungmook & Lee, Dae-Young, 2017. "Experimental investigation and introduction of a similarity parameter for characterizing the heat and mass transfer in polymer desiccant wheels," Energy, Elsevier, vol. 120(C), pages 705-717.
    8. Dong, Hye-Won & Jeong, Jae-Weon, 2022. "Energy and economic analysis of organic Rankine cycle for liquid desiccant system," Energy, Elsevier, vol. 241(C).
    9. Storle, Devin & Abdel-Salam, Mohamed R.H. & Simonson, Carey J., 2019. "Energy performance comparison of a 3-fluid and 2-fluid liquid desiccant membrane air-conditioning systems in an office building," Energy, Elsevier, vol. 176(C), pages 437-456.
    10. Fong, K.F. & Lee, C.K., 2018. "Impact of adsorbent characteristics on performance of solid desiccant wheel," Energy, Elsevier, vol. 144(C), pages 1003-1012.
    11. Pan, Q.W. & Xu, J. & Ge, T.S. & Wang, R.Z., 2022. "Multi-mode integrated system of adsorption refrigeration using desiccant coated heat exchangers for ultra-low grade heat utilization," Energy, Elsevier, vol. 238(PB).
    12. Yang, Zili & Tao, Ruiyang & Chen, Lu-An & Zhong, Ke & Chen, Bin, 2020. "Feasibility study on improving the performance of atomization liquid desiccant dehumidifier with standing-wave ultrasound," Energy, Elsevier, vol. 205(C).
    13. Liang, Jyun-De & Huang, Bo-Hao & Chiang, Yuan-Ching & Chen, Sih-Li, 2020. "Experimental investigation of a liquid desiccant dehumidification system integrated with shallow geothermal energy," Energy, Elsevier, vol. 191(C).
    14. Sheng, Ying & Zhang, Yufeng & Zhang, Ge, 2015. "Simulation and energy saving analysis of high temperature heat pump coupling to desiccant wheel air conditioning system," Energy, Elsevier, vol. 83(C), pages 583-596.
    15. Liang, Cai-Hang & Li, Nan-Feng & Huang, Si-Min, 2020. "Entropy and exergy analysis of an internally-cooled membrane liquid desiccant dehumidifier," Energy, Elsevier, vol. 192(C).
    16. Cheng, Qing & Wang, Han & Liu, Lin, 2022. "An ion mass transfer model of electrodialysis regenerator for inorganic salt liquid desiccants," Energy, Elsevier, vol. 239(PE).
    17. Saputra, Dendi Adi & Osaka, Yugo & Tsujiguchi, Takuya & Haruki, Masashi & Kumita, Mikio & Kodama, Akio, 2020. "Experimental investigation of desiccant wheel dehumidification control method for changes in regeneration heat input," Energy, Elsevier, vol. 205(C).
    18. Al-Alili, Ali & Hwang, Yunho & Radermacher, Reinhard, 2015. "Performance of a desiccant wheel cycle utilizing new zeolite material: Experimental investigation," Energy, Elsevier, vol. 81(C), pages 137-145.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chung, Jun Yeob & Park, Myeong Hyeon & Hong, Seong Ho & Baek, Jaehyun & Han, Changho & Lee, Sewon & Kang, Yong Tae & Kim, Yongchan, 2023. "Comparative performance evaluation of multi-objective optimized desiccant wheels coated with MIL-100 (Fe) and silica gel composite," Energy, Elsevier, vol. 283(C).
    2. Shamim, Jubair A. & Hsu, Wei-Lun & Paul, Soumyadeep & Yu, Lili & Daiguji, Hirofumi, 2021. "A review of solid desiccant dehumidifiers: Current status and near-term development goals in the context of net zero energy buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    3. Wu, X.N. & Ge, T.S. & Dai, Y.J. & Wang, R.Z., 2019. "Investigation on novel desiccant wheel using wood pulp fiber paper with high coating ratio as matrix," Energy, Elsevier, vol. 176(C), pages 493-504.
    4. Liu, Shuo & Jang, Hyusan & Yeo, Myoung-Souk, 2023. "Experimental study on the operating characteristic of the desiccant cooling systems with the potential of condensing heat recovery," Energy, Elsevier, vol. 283(C).
    5. Shukla, D.L. & Modi, K.V., 2022. "Influence of distinct input parameters on performance indices of dehumidifier, regenerator and on liquid desiccant-operated evaporative cooling system – A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    6. Chen, Chih-Hao & Hsu, Chien-Yeh & Chen, Chih-Chieh & Chiang, Yuan-Ching & Chen, Sih-Li, 2016. "Silica gel/polymer composite desiccant wheel combined with heat pump for air-conditioning systems," Energy, Elsevier, vol. 94(C), pages 87-99.
    7. Cao, Menglong & Wang, Zhe & Tang, Haobo & Li, Songran & Ji, Yulong & Han, Fenghui, 2024. "Heat flow topology-driven thermo-mass decoupling strategy: Cross-scale regularization modeling and optimization analysis," Applied Energy, Elsevier, vol. 367(C).
    8. Yang, Zili & Tao, Ruiyang & Chen, Lu-An & Zhong, Ke & Chen, Bin, 2020. "Feasibility study on improving the performance of atomization liquid desiccant dehumidifier with standing-wave ultrasound," Energy, Elsevier, vol. 205(C).
    9. Peter Niemann & Finn Richter & Arne Speerforck & Gerhard Schmitz, 2019. "Desiccant-Assisted Air Conditioning System Relying on Solar and Geothermal Energy during Summer and Winter," Energies, MDPI, vol. 12(16), pages 1-20, August.
    10. Su, Xing & Geng, Yining & Huang, Lei & Li, Shangao & Wang, Qinbao & Xu, Zehan & Tian, Shaochen, 2024. "Review on dehumidification technology in low and extremely low humidity industrial environments," Energy, Elsevier, vol. 302(C).
    11. Piero Bareschino & Francesco Pepe & Carlo Roselli & Maurizio Sasso & Francesco Tariello, 2019. "Desiccant-Based Air Handling Unit Alternatively Equipped with Three Hygroscopic Materials and Driven by Solar Energy," Energies, MDPI, vol. 12(8), pages 1-20, April.
    12. Feng, Changling & E, Jiaqiang & Han, Wei & Deng, Yuanwang & Zhang, Bin & Zhao, Xiaohuan & Han, Dandan, 2021. "Key technology and application analysis of zeolite adsorption for energy storage and heat-mass transfer process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    13. Wu, X.N. & Ge, T.S. & Dai, Y.J. & Wang, R.Z., 2018. "Review on substrate of solid desiccant dehumidification system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3236-3249.
    14. Ge, T.S. & Zhang, J.Y. & Dai, Y.J. & Wang, R.Z., 2017. "Experimental study on performance of silica gel and potassium formate composite desiccant coated heat exchanger," Energy, Elsevier, vol. 141(C), pages 149-158.
    15. Li, Wei & Yao, Ye, 2021. "Performance analysis of different flow types of internally-cooled membrane-based liquid desiccant dehumidifiers," Energy, Elsevier, vol. 228(C).
    16. Shuo Liu & Chang-Ho Jeong & Myoung-Souk Yeo, 2020. "Effect of Evaporator Position on Heat Pump Assisted Solid Desiccant Cooling Systems," Energies, MDPI, vol. 13(22), pages 1-21, November.
    17. Aixiang Xu & Mengjin Xu & Nan Xie & Yawen Xiong & Junze Huang & Yingjie Cai & Zhiqiang Liu & Sheng Yang, 2021. "Thermodynamic Analysis of a Hybrid System Coupled Cooling, Heating and Liquid Dehumidification Powered by Geothermal Energy," Energies, MDPI, vol. 14(19), pages 1-21, September.
    18. Su, Minqi & Han, Xiaoqu & Dai, Yanbing & Wang, Jinshi & Liu, Jiping & Yan, Junjie, 2024. "Investigation on recirculated regenerative solid desiccant-assisted dehumidification system: Impact of system configurations and desiccant materials," Energy, Elsevier, vol. 286(C).
    19. Chung, Hyun Joon & Jeon, Yongseok & Kim, Dongwoo & Kim, Sunjae & Kim, Yongchan, 2017. "Performance characteristics of domestic hybrid dehumidifier combined with solid desiccant rotor and vapor compression system," Energy, Elsevier, vol. 141(C), pages 66-75.
    20. Gao, D.C. & Sun, Y.J. & Ma, Z. & Ren, H., 2021. "A review on integration and design of desiccant air-conditioning systems for overall performance improvements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:284:y:2023:i:c:s0360544223027639. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.