IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v278y2023ipas0360544223012495.html
   My bibliography  Save this article

Experimental and numerical investigations on the effects of insertion-type longitudinal vortex generators on flow and heat transfer characteristics in square minichannels

Author

Listed:
  • Feng, Zhenfei
  • Jiang, Ping
  • Zheng, Siyao
  • Zhang, Qingyuan
  • Chen, Zhen
  • Guo, Fangwen
  • Zhang, Jinxin

Abstract

Longitudinal vortex generator (LVG) is an effective device for enhancing heat transfer in micro/mini-channel thermal systems. In this study, a new insertion-type LVG (ITLVG) is designed and the effects of length and arrangement of ITLVG on flow and heat transfer characteristics in square minichannel are explored using experimental and numerical methods under Reynolds number of 414–1042. Results show that the vortex flow is generated in both sides of ITLVG and behind ITLVG, thereby intensifying flow disturbance and reducing the thermal boundary layer. The friction factors and Nusselt numbers in the minichannels with ITLVGs increase by 85.5%–246.1% and 39.2%–102.0% on average, respectively, compared to smooth minichannel. The ITLVG arrangement has a significant effect on the flow and heat transfer, while the ITLVG length has a slight effect. The ITLVG with the length of 20 mm and arranged simultaneously in upstream, midstream and downstream shows the highest performance evaluation criterion (PEC) values at most of Reynolds numbers, as well as maximum PEC value reaches 1.50 at the Reynolds number of 1042. Moreover, the correlations for Nusselt number and friction factor are developed. Overall, the new ITLVG performs beneficial effect for comprehensive performance improvement in minichannel to increase energy conversion efficiency.

Suggested Citation

  • Feng, Zhenfei & Jiang, Ping & Zheng, Siyao & Zhang, Qingyuan & Chen, Zhen & Guo, Fangwen & Zhang, Jinxin, 2023. "Experimental and numerical investigations on the effects of insertion-type longitudinal vortex generators on flow and heat transfer characteristics in square minichannels," Energy, Elsevier, vol. 278(PA).
  • Handle: RePEc:eee:energy:v:278:y:2023:i:pa:s0360544223012495
    DOI: 10.1016/j.energy.2023.127855
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223012495
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2023.127855?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. He, Ziqiang & Yan, Yunfei & Zhang, Zhien, 2021. "Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review," Energy, Elsevier, vol. 216(C).
    2. Lei Chai & Savvas A. Tassou, 2018. "A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface," Energies, MDPI, vol. 11(10), pages 1-45, October.
    3. Alam, Tabish & Kim, Man-Hoe, 2018. "A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 813-839.
    4. Ahmed, H.E. & Mohammed, H.A. & Yusoff, M.Z., 2012. "An overview on heat transfer augmentation using vortex generators and nanofluids: Approaches and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5951-5993.
    5. Liu, S. & Sakr, M., 2013. "A comprehensive review on passive heat transfer enhancements in pipe exchangers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 64-81.
    6. Khoshvaght-Aliabadi, M. & Sartipzadeh, O. & Alizadeh, A., 2015. "An experimental study on vortex-generator insert with different arrangements of delta-winglets," Energy, Elsevier, vol. 82(C), pages 629-639.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Huadong Jiang & Fu Chen & Chonghai Huang & Jianyang Yu & Yanping Song & Juanshu Zhang, 2023. "Numerical Study of the Influence of Different Bending Shapes on the Heat Transfer Characteristics of Annular Cross Wavy Primary Surface Recuperator (CW-PSR)," Energies, MDPI, vol. 16(24), pages 1-25, December.
    2. Hajialibabaei, Mahsa & Saghir, M.Ziad & Dincer, Ibrahim & Bicer, Yusuf, 2024. "Optimization of heat dissipation in novel design wavy channel heat sinks for better performance," Energy, Elsevier, vol. 297(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gallegos, Ralph Kristoffer B. & Sharma, Rajnish N., 2017. "Flags as vortex generators for heat transfer enhancement: Gaps and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 950-962.
    2. Junjie Zhao & Bin Zhang & Xiaoli Fu & Shenglin Yan, 2021. "Numerical Study on the Influence of Vortex Generator Arrangement on Heat Transfer Enhancement of Oil-Cooled Motor," Energies, MDPI, vol. 14(21), pages 1-17, October.
    3. Ahadi, Mohammad & Abbassi, Abbas, 2015. "Entropy generation analysis of laminar forced convection through uniformly heated helical coils considering effects of high length and heat flux and temperature dependence of thermophysical properties," Energy, Elsevier, vol. 82(C), pages 322-332.
    4. Tang, Song-Zhen & Wang, Fei-Long & He, Ya-Ling & Yu, Yang & Tong, Zi-Xiang, 2019. "Parametric optimization of H-type finned tube with longitudinal vortex generators by response surface model and genetic algorithm," Applied Energy, Elsevier, vol. 239(C), pages 908-918.
    5. Rasheed, A.K. & Khalid, M. & Rashmi, W. & Gupta, T.C.S.M. & Chan, A., 2016. "Graphene based nanofluids and nanolubricants – Review of recent developments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 63(C), pages 346-362.
    6. Jafari, Davoud & Wits, Wessel W., 2018. "The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 420-442.
    7. Ali Rehman & Zabidin Salleh, 2021. "Influence of Marangoni Convection on Magnetohydrodynamic Viscous Dissipation and Heat Transfer on Hybrid Nanofluids in a Rotating System among Two Surfaces," Mathematics, MDPI, vol. 9(18), pages 1-16, September.
    8. Martí Comamala & Ivan Ruiz Cózar & Albert Massaguer & Eduard Massaguer & Toni Pujol, 2018. "Effects of Design Parameters on Fuel Economy and Output Power in an Automotive Thermoelectric Generator," Energies, MDPI, vol. 11(12), pages 1-28, November.
    9. Zhang, Wujie & Yang, Fubin & Zhang, Hongguang & Ping, Xu & Yan, Dong & Wang, Chongyao, 2022. "Application of two-phase pulsating flow in organic Rankine cycle system for diesel engine waste heat recovery," Energy, Elsevier, vol. 243(C).
    10. Khoshvaght-Aliabadi, M. & Sartipzadeh, O. & Alizadeh, A., 2015. "An experimental study on vortex-generator insert with different arrangements of delta-winglets," Energy, Elsevier, vol. 82(C), pages 629-639.
    11. Yicong Li & Zuoqin Qian & Qiang Wang, 2021. "Numerical Analysis on Thermohydraulic Performance of the Tube Inserted with Rectangular Winglet Vortex Generators," Energies, MDPI, vol. 15(1), pages 1-23, December.
    12. Acherjee, Simul & Deb, Ujjwal Kumar & Bhuyan, Md. Moniruzzaman, 2020. "The effect of the angle of perforation on perforated inserts in a pipe flow for heat transfer analysis," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 171(C), pages 306-314.
    13. Younus Hamoudi Assaf & Abdulrazzak Akroot & Hasanain A. Abdul Wahhab & Wadah Talal & Mothana Bdaiwi & Mohammed Y. Nawaf, 2023. "Impact of Nano Additives in Heat Exchangers with Twisted Tapes and Rings to Increase Efficiency: A Review," Sustainability, MDPI, vol. 15(10), pages 1-17, May.
    14. Li, Jing & Zuo, Wei & E, Jiaqiang & Zhang, Yuntian & Li, Qingqing & Sun, Ke & Zhou, Kun & Zhang, Guangde, 2022. "Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II," Energy, Elsevier, vol. 242(C).
    15. Lei Chai & Savvas A. Tassou, 2018. "A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface," Energies, MDPI, vol. 11(10), pages 1-45, October.
    16. Said, Zafar & El Haj Assad, M. & Hachicha, Ahmed Amine & Bellos, Evangelos & Abdelkareem, Mohammad Ali & Alazaizeh, Duha Zeyad & Yousef, Bashria A.A., 2019. "Enhancing the performance of automotive radiators using nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 183-194.
    17. Yijun Li & Stéphane Roux & Cathy Castelain & Yilin Fan & Lingai Luo, 2023. "Design and Optimization of Heat Sinks for the Liquid Cooling of Electronics with Multiple Heat Sources: A Literature Review," Energies, MDPI, vol. 16(22), pages 1-26, November.
    18. Rishikesh Sharma & Dipti Prasad Mishra & Marek Wasilewski & Lakhbir Singh Brar, 2023. "Application of Response Surface Methodology and Artificial Neural Network to Optimize the Curved Trapezoidal Winglet Geometry for Enhancing the Performance of a Fin-and-Tube Heat Exchanger," Energies, MDPI, vol. 16(10), pages 1-30, May.
    19. Yazid, Muhammad Noor Afiq Witri Muhammad & Sidik, Nor Azwadi Che & Yahya, Wira Jazair, 2017. "Heat and mass transfer characteristics of carbon nanotube nanofluids: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 914-941.
    20. Mahir Faris Abdullah & Rozli Zulkifli & Hazim Moria & Asmaa Soheil Najm & Zambri Harun & Shahrir Abdullah & Wan Aizon Wan Ghopa & Noor Humam Sulaiman, 2021. "Assessment of TiO 2 Nanoconcentration and Twin Impingement Jet of Heat Transfer Enhancement—A Statistical Approach Using Response Surface Methodology," Energies, MDPI, vol. 14(3), pages 1-29, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:278:y:2023:i:pa:s0360544223012495. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.