IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v264y2023ics0360544222030961.html
   My bibliography  Save this article

Flame morphologic characteristics of horizontally oriented jet fires impinging on a vertical plate: Experiments and theoretical analysis

Author

Listed:
  • Wang, Zhenhua
  • Jiang, Juncheng
  • Wang, Guanghu
  • Ni, Lei
  • Pan, Yong
  • Li, Meng

Abstract

Flame morphological characteristics of horizontal impinging jet fires are of practical importance in predicting and controlling the undesirable energy transfer to the nearby obstacle, which usually results in an escalating accident accompanied by severe consequences. But up to now, the relevant research is still very limited. The length of flame spread on the obstacle's surface for various nozzle diameters as well as the lift-off distance restricted by a vertical plane surface downstream the flame has not been quantified yet. In this work, the evolutions of flame spread length and lift-off distance of horizontal jet fires impinging on a vertical plate for different nozzle diameters at various energy (heat) release rates and nozzle-plate spacings have been quantified comprehensively. Experiments were conducted with three nozzles with different inner diameters of 2.0, 3.0 and 4.2 mm. The heat release rates of the fire source ranged between 5.7 and 32.2 kW, and the nozzle-plate spacings were varied from 0.20 to 0.40 m with a corresponding free condition. The results showed that the length of flame spread along the vertical plate increased with increasing the heat release rate and decreasing the nozzle-plate spacing for a given nozzle diameter. In addition, the large nozzle had a relatively greater increase in the flame spread length than the small one. A new correlation was proposed on physically the coupling effects of the flux ratio of buoyancy-induced air entrainment and jet momentum and the dimensionless heat release rate, showing good agreement with the experimental results. It was also found that the normalized lift-off distance under impingement can be correlated with the modified dimensionless flow number, and the correlation can well collapse all the lift-off data of this work. The present findings contribute to a better understanding of horizontal impinging jet fires, allowing predictions to be made regarding the possible threat and the establishment of the necessary safety distance for the pipeline to reduce the potential risk of such fire disasters.

Suggested Citation

  • Wang, Zhenhua & Jiang, Juncheng & Wang, Guanghu & Ni, Lei & Pan, Yong & Li, Meng, 2023. "Flame morphologic characteristics of horizontally oriented jet fires impinging on a vertical plate: Experiments and theoretical analysis," Energy, Elsevier, vol. 264(C).
  • Handle: RePEc:eee:energy:v:264:y:2023:i:c:s0360544222030961
    DOI: 10.1016/j.energy.2022.126210
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222030961
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2022.126210?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gao, Zihe & Wan, Huaxian & Ji, Jie & Bi, Yubo, 2019. "Experimental prediction on the performance and propagation of ceiling jets under the influence of wall confinement," Energy, Elsevier, vol. 178(C), pages 378-385.
    2. Xie, Minghua & Min, Jialin & Fang, Xingming & Sun, Chuanwang & Zhang, Zhen, 2022. "Policy selection based on China's natural gas security evaluation and comparison," Energy, Elsevier, vol. 247(C).
    3. Tang, Fei & Hu, Peng & Shi, Congling, 2021. "Ceiling thermal impingement spread characteristics induced by wall-attached fires under various sub-atmospheric pressures," Energy, Elsevier, vol. 215(PB).
    4. Li, Xing & Xie, Shengrong & Zhang, Jing & Li, Tao & Wang, Xiaohan, 2021. "Combustion characteristics of non-premixed CH4/CO2 jet flames in coflow air at normal and elevated temperatures," Energy, Elsevier, vol. 214(C).
    5. Yoon, Ha-Jun & Seo, Seung-Kwon & Lee, Chul-Jin, 2022. "Multi-period optimization of hydrogen supply chain utilizing natural gas pipelines and byproduct hydrogen," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    6. Lu, Zhengkang & Gao, Yuke & Li, Guochun & Liu, Bin & Xu, Yao & Tao, Changfa & Meng, Shun & Qian, Yejian, 2022. "The analysis of temperature and air entrainment rate for the turbulence diffusion jet flame of propane and carbon dioxide gas mixture," Energy, Elsevier, vol. 254(PA).
    7. Dou, Yuling & Liu, Haiqiang & Liu, Bin & Zhang, Yu & Liu, Yongqiang & Cheng, Xiaozhang & Tao, Changfa, 2021. "Effects of carbon dioxide addition to fuel on flame radiation fraction in propane diffusion flames," Energy, Elsevier, vol. 218(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Xiepeng & Zhang, Xiaolei & Lv, Jiang & Chen, Xiaotao & Hu, Longhua, 2023. "Experimental study on the buoyant turbulent diffusion flame height of various intermittent levels," Applied Energy, Elsevier, vol. 351(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tang, Zhenhua & Wang, Zhirong & Zhao, Kun, 2023. "Flame stabilization characteristics of turbulent hydrogen jet flame diluted by nitrogen," Energy, Elsevier, vol. 283(C).
    2. Qi, Zhenyao & Hu, Haowei & Ji, Jie, 2024. "Investigation on the burning behaviors of the combustible ceiling with the impingement of an incipient fire source," Energy, Elsevier, vol. 290(C).
    3. Jiwon Yu & Young Jae Han & Hyewon Yang & Sugil Lee & Gildong Kim & Chulung Lee, 2022. "Promising Technology Analysis and Patent Roadmap Development in the Hydrogen Supply Chain," Sustainability, MDPI, vol. 14(21), pages 1-20, October.
    4. Kasin Ransikarbum & Wattana Chanthakhot & Tony Glimm & Jettarat Janmontree, 2023. "Evaluation of Sourcing Decision for Hydrogen Supply Chain Using an Integrated Multi-Criteria Decision Analysis (MCDA) Tool," Resources, MDPI, vol. 12(4), pages 1-22, April.
    5. Forghani, Kamran & Kia, Reza & Nejatbakhsh, Yousef, 2023. "A multi-period sustainable hydrogen supply chain model considering pipeline routing and carbon emissions: The case study of Oman," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).
    6. Palma, Alessia & Paltrinieri, Andrea & Goodell, John W. & Oriani, Marco Ercole, 2024. "The black box of natural gas market: Past, present, and future," International Review of Financial Analysis, Elsevier, vol. 94(C).
    7. Lee, Ju-Sung & Cherif, Ali & Yoon, Ha-Jun & Seo, Seung-Kwon & Bae, Ju-Eon & Shin, Ho-Jin & Lee, Chulgu & Kwon, Hweeung & Lee, Chul-Jin, 2022. "Large-scale overseas transportation of hydrogen: Comparative techno-economic and environmental investigation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    8. Xie, Minghua & Wei, Xiaonan & Chen, Chuanglian & Sun, Chuanwang, 2022. "China's natural gas production peak and energy return on investment (EROI): From the perspective of energy security," Energy Policy, Elsevier, vol. 164(C).
    9. Bei Cao & Xiaodong Zhou & Yubiao Huang & Yuan Zheng & Kai Ye & Hong Liu & Lizhong Yang, 2020. "An Experimental Investigation of the External Wind Effects on the Ceiling Temperature Distribution of Fire-Induced Thermal Flow in a Corridor Connected to a Compartment," Energies, MDPI, vol. 13(7), pages 1-18, April.
    10. Peng, Yudan & Fu, Guangming & Chen, Jiying & Sun, Baojiang & Sun, Xiaohui, 2024. "Bottom-hole pressure inversion method for nature gas wells based on blowout combustion flame shape parameters," Energy, Elsevier, vol. 294(C).
    11. Guo, Fangyi & Ding, Long & Gao, Zihe & Yu, Longxing & Ji, Jie, 2020. "Effects of wind flow and sidewall restriction on the geometric characteristics of propane diffusion flames in tunnels," Energy, Elsevier, vol. 198(C).
    12. Zhang, Xiaochun & Zhang, Zijian & Su, Guokai & Tang, Fei & Liu, Aihua & Tao, Haowen, 2020. "Experimental study on thermal hazard and facade flame characterization induced by incontrollable combustion of indoor energy usage," Energy, Elsevier, vol. 207(C).
    13. Deng, Lei & Tang, Fei & Wang, Xinkai, 2021. "Uncontrollable combustion characteristics of energy storage oil pool: Modelling of mass loss rate and flame merging time of annular pools," Energy, Elsevier, vol. 224(C).
    14. Shi, Congling & Deng, Lei & Ren, Fei & Tang, Fei, 2023. "Experimental study on the flame height evolution of two adjacent hydrocarbon pool fires under transverse air flow," Energy, Elsevier, vol. 262(PB).
    15. Zuo, Wei & Zhang, Yuntian & Li, Qingqing & Li, Jing & He, Zhu, 2021. "Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications," Energy, Elsevier, vol. 223(C).
    16. Wang, Lin & Yang, Yongbin & Ou, Yang & Zhong, Qiang & Zhang, Yan & Yi, Lingyun & Li, Qian & Huang, Zhucheng & Jiang, Tao, 2024. "In-depth study on the synergistic conversion mechanism of iron ore with waste biochar for co-producing directly reduced iron (DRI) and syngas," Energy, Elsevier, vol. 290(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:264:y:2023:i:c:s0360544222030961. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.