IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v262y2023ipas0360544222022812.html
   My bibliography  Save this article

Adoption of triply periodic minimal surface structure for effective metal hydride-based hydrogen storage

Author

Listed:
  • Lesmana, Luthfan Adhy
  • Aziz, Muhammad

Abstract

Metal hydrides (MHs) are highly effective for storing hydrogen because of their stability, relatively low temperature and pressure, and high volumetric hydrogen density. However, their gravimetric density is low because of the weights of the MHs, leading to a low potential for mobility applications unless the reactor also acts as a body frame, thereby compensating for the light weight. Triply periodic minimal surface (TPMS) structures show great potential as heat exchangers (HEs) with extended surface properties per volume and reinforced structures designed to bear mechanical loads. Therefore, these structures are considered promising for application as hydrogen carriers, especially in MH-based hydrogen storage. This study aims to develop MH-based hydrogen storage using a TPMS structure. Furthermore, a mathematical model was developed to analyze and improve its performance in terms of the hydrogen absorption and desorption rates. The analysis using the mathematical model was validated with existing experimental data. Different cooling conditions were compared with natural convection. Moreover, finite element analysis was applied to evaluate the capability of the current structure design in withstanding the working pressure and load. This study's important finding is that the propose structure is proven to have higher hydrogen storage performance, including density and hydrogen charging and discharging performances. In addition, it is also found that improving the cooling conditions could increase the absorption rate. Forced convection (with a heat-transfer coefficient of 500 W/m2·K) seems to be a preferable cooling solution that requires low energy consumption and provides sufficient cooling. By using this cooling condition with the proposed TPMS reactor design, 90% of hydrogen is absorbed within 2000 s. Natural cooling requires almost double that time. It was also found that a reactor with a TPMS structure with a 1 mm wall thickness design could withstand MH working pressure conditions and a compression load of 5000 N. Based on this finding, the TPMS-based structure can be considered as a promising novel way of storing hydrogen for mobility applications.

Suggested Citation

  • Lesmana, Luthfan Adhy & Aziz, Muhammad, 2023. "Adoption of triply periodic minimal surface structure for effective metal hydride-based hydrogen storage," Energy, Elsevier, vol. 262(PA).
  • Handle: RePEc:eee:energy:v:262:y:2023:i:pa:s0360544222022812
    DOI: 10.1016/j.energy.2022.125399
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222022812
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2022.125399?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bai, Xiao-Shuai & Yang, Wei-Wei & Tang, Xin-Yuan & Yang, Fu-Sheng & Jiao, Yu-Hang & Yang, Yu, 2021. "Optimization of tree-shaped fin structures towards enhanced absorption performance of metal hydride hydrogen storage device: A numerical study," Energy, Elsevier, vol. 220(C).
    2. Muhammad Aziz, 2021. "Liquid Hydrogen: A Review on Liquefaction, Storage, Transportation, and Safety," Energies, MDPI, vol. 14(18), pages 1-29, September.
    3. Jiao, Kui & Li, Xianguo & Yin, Yan & Zhou, Yibo & Yu, Shuhai & Du, Qing, 2012. "Effects of various operating conditions on the hydrogen absorption processes in a metal hydride tank," Applied Energy, Elsevier, vol. 94(C), pages 257-269.
    4. Niaz, Saba & Manzoor, Taniya & Pandith, Altaf Hussain, 2015. "Hydrogen storage: Materials, methods and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 457-469.
    5. Louis Schlapbach & Andreas Züttel, 2001. "Hydrogen-storage materials for mobile applications," Nature, Nature, vol. 414(6861), pages 353-358, November.
    6. Khosravi, A. & Koury, R.N.N. & Machado, L. & Pabon, J.J.G., 2018. "Energy, exergy and economic analysis of a hybrid renewable energy with hydrogen storage system," Energy, Elsevier, vol. 148(C), pages 1087-1102.
    7. Attaran, Mohsen, 2017. "The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing," Business Horizons, Elsevier, vol. 60(5), pages 677-688.
    8. Hassan, I.A. & Ramadan, Haitham S. & Saleh, Mohamed A. & Hissel, Daniel, 2021. "Hydrogen storage technologies for stationary and mobile applications: Review, analysis and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    9. Zhou, Li, 2005. "Progress and problems in hydrogen storage methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 9(4), pages 395-408, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhang, Tao & Zhang, Kaifei & Liu, Fei & Zhao, Miao & Zhang, David Z., 2024. "Analysis of thermal storage behavior of composite phase change materials embedded with gradient-designed TPMS thermal conductivity enhancers: A numerical and experimental study," Applied Energy, Elsevier, vol. 358(C).
    2. Krishna, K. Venkata & Kanti, Praveen Kumar & Maiya, M.P., 2024. "A novel fin efficiency concept to optimize solid state hydrogen storage reactor," Energy, Elsevier, vol. 288(C).
    3. Wang, Jinghan & Chen, Kai & Zeng, Min & Ma, Ting & Wang, Qiuwang & Cheng, Zhilong, 2023. "Assessment of flow and heat transfer of triply periodic minimal surface based heat exchangers," Energy, Elsevier, vol. 282(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Morales-Ospino, R. & Celzard, A. & Fierro, V., 2023. "Strategies to recover and minimize boil-off losses during liquid hydrogen storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 182(C).
    2. Usman, Muhammad R., 2022. "Hydrogen storage methods: Review and current status," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    3. Muntasir Shovon, Shaik & Ahamed Akash, Faysal & Abdur Rahman, Md & Rahman, Wahida & Chakraborty, Prosenjeet & Monir, Minhaj Uddin & Sarkar, Shaheen M. & Abd Aziz, Azrina & Chowdhury, Shahariar, 2024. "Advancements in hydrogen generation, storage, and utilizations: A comprehensive review of current trends in Bangladesh," Energy, Elsevier, vol. 292(C).
    4. Calabrese, M. & Russo, D. & di Benedetto, A. & Marotta, R. & Andreozzi, R., 2023. "Formate/bicarbonate interconversion for safe hydrogen storage: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).
    5. José Manuel Andújar & Francisca Segura & Jesús Rey & Francisco José Vivas, 2022. "Batteries and Hydrogen Storage: Technical Analysis and Commercial Revision to Select the Best Option," Energies, MDPI, vol. 15(17), pages 1-32, August.
    6. Ádám Révész & Marcell Gajdics, 2021. "Improved H-Storage Performance of Novel Mg-Based Nanocomposites Prepared by High-Energy Ball Milling: A Review," Energies, MDPI, vol. 14(19), pages 1-31, October.
    7. Bai, Xiao-Shuai & Yang, Wei-Wei & Tang, Xin-Yuan & Yang, Fu-Sheng & Jiao, Yu-Hang & Yang, Yu, 2021. "Hydrogen absorption performance investigation of a cylindrical MH reactor with rectangle heat exchange channels," Energy, Elsevier, vol. 232(C).
    8. Bai, Xiao-Shuai & Yang, Wei-Wei & Tang, Xin-Yuan & Dai, Zhou-Qiao & Yang, Fu-Sheng, 2022. "Parametric optimization of coupled fin-metal foam metal hydride bed towards enhanced hydrogen absorption performance of metal hydride hydrogen storage device," Energy, Elsevier, vol. 243(C).
    9. Liu, Yongfeng & Zhang, Wenxuan & Zhang, Xin & Yang, Limei & Huang, Zhenguo & Fang, Fang & Sun, Wenping & Gao, Mingxia & Pan, Hongge, 2023. "Nanostructured light metal hydride: Fabrication strategies and hydrogen storage performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 184(C).
    10. Kilinc, Dilek & Sahin, Omer, 2020. "High volume hydrogen evolution from KBH4 hydrolysis with palladium complex catalyst," Renewable Energy, Elsevier, vol. 161(C), pages 257-264.
    11. Zhang, Tongtong & Uratani, Joao & Huang, Yixuan & Xu, Lejin & Griffiths, Steve & Ding, Yulong, 2023. "Hydrogen liquefaction and storage: Recent progress and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    12. Rangel, C.M. & Fernandes, V.R. & Gano, A.J., 2022. "Metal hydride-based hydrogen production and storage system for stationary applications powered by renewable sources," Renewable Energy, Elsevier, vol. 197(C), pages 398-405.
    13. Bai, Xiao-Shuai & Rong, Long & Yang, Wei-Wei & Yang, Fu-Sheng, 2023. "Effective thermal conductivity of metal hydride particle bed: Theoretical model and experimental validation," Energy, Elsevier, vol. 271(C).
    14. Montazerinejad, H. & Eicker, U., 2022. "Recent development of heat and power generation using renewable fuels: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    15. Wang, Ke & Chen, Wei & Li, Lu, 2022. "Multi-field coupled modeling of metal hydride hydrogen storage: A resistance atlas for H2 absorption reaction and heat-mass transport," Renewable Energy, Elsevier, vol. 187(C), pages 1118-1129.
    16. Qian, Jin-yuan & Chen, Min-rui & Gao, Zhi-xin & Jin, Zhi-jiang, 2019. "Mach number and energy loss analysis inside multi-stage Tesla valves for hydrogen decompression," Energy, Elsevier, vol. 179(C), pages 647-654.
    17. Adriana Rincon Montenegro & Marco Sanjuan & Mauricio Carmona, 2019. "Energy Storage Development using Hydrogen and its Potential Application in Colombia," International Journal of Energy Economics and Policy, Econjournals, vol. 9(6), pages 254-268.
    18. Komova, O.V. & Simagina, V.I. & Butenko, V.R. & Odegova, G.V. & Bulavchenko, O.A. & Nikolaeva, O.A. & Ozerova, A.M. & Lipatnikova, I.L. & Tayban, E.S. & Mukha, S.A. & Netskina, O.V., 2022. "Dehydrogenation of ammonia borane recrystallized by different techniques," Renewable Energy, Elsevier, vol. 184(C), pages 460-472.
    19. Chung, Kyong-Hwan, 2010. "High-pressure hydrogen storage on microporous zeolites with varying pore properties," Energy, Elsevier, vol. 35(5), pages 2235-2241.
    20. Jorgen Depken & Alexander Dyck & Lukas Roß & Sören Ehlers, 2022. "Safety Considerations of Hydrogen Application in Shipping in Comparison to LNG," Energies, MDPI, vol. 15(9), pages 1-20, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:262:y:2023:i:pa:s0360544222022812. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.