IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v259y2022ics0360544222019715.html
   My bibliography  Save this article

Boiling crisis in porous structures

Author

Listed:
  • Genbach, A.A.
  • Beloev, H.I.
  • Bondartsev, D. Yu
  • Genbach, N.A.

Abstract

A hydrodynamic model of the boiling crisis in porous structures based on holographic interferometry and velocimetry has been developed, taking into account the liquid excess. The critical values of heat exchange surface height and structure thickness are established, the minimum value of hydrodynamic pressure that creates the required liquid surplus is determined. Two mathematical models of the boiling crisis involving internal boiling characteristics, revealed by means of velocity filming are proposed. The highest values of critical flows have been obtained for a dimensionless pressure of 4.4·10−3, and its growth to the value of 0.44 has little effect on the change in the crisis situation. All three models for the boiling crisis agree well with experiment for a wide range of pressure changes (0.01 … 8) MPa, with the effect of thermophysical properties derived from the models rather than by experimental selection of pressure. Three types of heat sources have been used in the experiments: electric, gas, and radiant, and the experiments have been completed by destroying heat-exchange surfaces and porous structures. Studies have been conducted on seven porous structures under the electric heating method and on eight other porous structures under gas heating for 26 combustion chambers and nozzles up to their destruction.

Suggested Citation

  • Genbach, A.A. & Beloev, H.I. & Bondartsev, D. Yu & Genbach, N.A., 2022. "Boiling crisis in porous structures," Energy, Elsevier, vol. 259(C).
    • Handle: RePEc:eee:energy:v:259:y:2022:i:c:s0360544222019715
    DOI: 10.1016/j.energy.2022.125076
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222019715
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125076?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Vögelin, Philipp & Georges, Gil & Boulouchos, Konstatinos, 2017. "Design analysis of gas engine combined heat and power plants (CHP) for building and industry heat demand under varying price structures," Energy, Elsevier, vol. 125(C), pages 356-366.
    2. Alexander Genbach & Hristo Beloev & David Bondartsev, 2021. "Comparison of Cooling Systems in Power Plant Units," Energies, MDPI, vol. 14(19), pages 1-14, October.
    3. Genbach, A.A. & Bondartsev, D. Yu. & Iliev, I.K. & Georgiev, A.G., 2020. "Scientific method of creation of ecologically clean capillary-porous systems of cooling of power equipment elements of power plants on the example of gas turbines," Energy, Elsevier, vol. 199(C).
    4. Boubaker, Riadh & Platel, Vincent, 2016. "Dynamic model of capillary pumped loop with unsaturated porous wick for terrestrial application," Energy, Elsevier, vol. 111(C), pages 402-413.
    5. Chen, Jingtan & Ahmad, Shakeel & Cai, Junjie & Liu, Huaqiang & Lau, Kwun Ting & Zhao, Jiyun, 2021. "Latest progress on nanotechnology aided boiling heat transfer enhancement: A review," Energy, Elsevier, vol. 215(PA).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xu, Nian & Yu, Xinyu & Liu, Zilong & Zhang, Tianxu & Chu, Huaqiang, 2024. "Effects of chloride ion concentration on porous surfaces and boiling heat transfer performance of porous surfaces," Energy, Elsevier, vol. 294(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Alexander Genbach & Hristo Beloev & David Bondartsev, 2021. "Comparison of Cooling Systems in Power Plant Units," Energies, MDPI, vol. 14(19), pages 1-14, October.
    2. Liu, Long & Wang, Mingqing & Chen, Yu, 2019. "A practical research on capillaries used as a front-end heat exchanger of seawater-source heat pump," Energy, Elsevier, vol. 171(C), pages 170-179.
    3. Takeshita, Takuma & Aki, Hirohisa & Kawajiri, Kotaro & Ishida, Masayoshi, 2021. "Assessment of utilization of combined heat and power systems to provide grid flexibility alongside variable renewable energy systems," Energy, Elsevier, vol. 214(C).
    4. Lu, Shuai & Gu, Wei & Zhou, Jinhui & Zhang, Xuesong & Wu, Chenyu, 2018. "Coordinated dispatch of multi-energy system with district heating network: Modeling and solution strategy," Energy, Elsevier, vol. 152(C), pages 358-370.
    5. He, Junjie & Chu, Wenxiao & Wang, Qiuwang, 2024. "Interfacial heat transfer and melt-front evolution at a Fractal Cantor structured interface under various PCM melting conditions," Energy, Elsevier, vol. 294(C).
    6. Iliev, I.K. & Terziev, A.K. & Beloev, H.I. & Nikolaev, I. & Georgiev, A.G., 2021. "Comparative analysis of the energy efficiency of different types co-generators at large scales CHPs," Energy, Elsevier, vol. 221(C).
    7. Evgeny A. Chinnov & Sergey Ya. Khmel & Victor Yu. Vladimirov & Aleksey I. Safonov & Vitaliy V. Semionov & Kirill A. Emelyanenko & Alexandre M. Emelyanenko & Ludmila B. Boinovich, 2022. "Boiling Heat Transfer Enhancement on Biphilic Surfaces," Energies, MDPI, vol. 15(19), pages 1-19, October.
    8. Denis Kuznetsov & Aleksandr Pavlenko, 2022. "Heat Transfer during Nitrogen Boiling on Surfaces Modified by Microarc Oxidation," Energies, MDPI, vol. 15(16), pages 1-14, August.
    9. Yihang Zhao & Mingshan Wei & Dan Dan, 2024. "Modeling, Design, and Optimization of Loop Heat Pipes," Energies, MDPI, vol. 17(16), pages 1-40, August.
    10. Buffat, René & Raubal, Martin, 2019. "Spatio-temporal potential of a biogenic micro CHP swarm in Switzerland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 443-454.
    11. Pastore, Lorenzo Mario & Lo Basso, Gianluigi & de Santoli, Livio, 2022. "Can the renewable energy share increase in electricity and gas grids takes out the competitiveness of gas-driven CHP plants for distributed generation?," Energy, Elsevier, vol. 256(C).
    12. Xu, Nian & Yu, Xinyu & Liu, Zilong & Zhang, Tianxu & Chu, Huaqiang, 2024. "Effects of chloride ion concentration on porous surfaces and boiling heat transfer performance of porous surfaces," Energy, Elsevier, vol. 294(C).
    13. Majidi, Majid & Nojavan, Sayyad & Zare, Kazem, 2017. "A cost-emission framework for hub energy system under demand response program," Energy, Elsevier, vol. 134(C), pages 157-166.
    14. Stojiljković, Mirko M., 2017. "Bi-level multi-objective fuzzy design optimization of energy supply systems aided by problem-specific heuristics," Energy, Elsevier, vol. 137(C), pages 1231-1251.
    15. Tammo Zobel & Christian Schürch & Konstantinos Boulouchos & Christopher Onder, 2020. "Reduction of Cold-Start Emissions for a Micro Combined Heat and Power Plant," Energies, MDPI, vol. 13(8), pages 1-18, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:259:y:2022:i:c:s0360544222019715. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.