IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v258y2022ics0360544222017868.html
   My bibliography  Save this article

Technical feasibility of biomass and paper-mill sludge co-gasification for renewable fuel production using Aspen Plus

Author

Listed:
  • Rosha, Pali
  • Ibrahim, Hussameldin

Abstract

This work reports an innovative simulation method for effectively utilizing paper-mill sludge based on the co-gasification approach for energy-enriched renewable fuel production. An Aspen plus-based co-gasification model was developed to simulate and examine the synergetic effects of biomass and paper-mill sludge co-gasification. Initially, the model was validated using experimental data from the reported literature and found good agreement regarding gasification and co-gasification approaches. Sensitivity analysis of biomass gasification revealed that the maximum H2 content of 29.6% and CO (36.0%), LHV (7.8 MJ/Nm3), 72.2% (CCE) was obtained at optimal (850 °C: temperature; 1 bar: pressure; 0.2: ER) conditions. Further, the H2 proportion enhanced, and CO declined to 38.8 and 30.7% at the same operating conditions, respectively, with a co-gasification ratio of 50% compared to 0% (H2: 29.6% and CO: 36.0%). However, with increasing the co-gasification ratio beyond 20%, the CO content started to follow upward trends; at the same CGR, the H2, LHV, and CCE observed were 36.0%, 7.76 MJ/Nm3, and 65.2%, respectively. Hence, the developed co-gasification model can provide vital information for large-scale gasifier design, operating decisions, and optimization using different biomass blends.

Suggested Citation

  • Rosha, Pali & Ibrahim, Hussameldin, 2022. "Technical feasibility of biomass and paper-mill sludge co-gasification for renewable fuel production using Aspen Plus," Energy, Elsevier, vol. 258(C).
    • Handle: RePEc:eee:energy:v:258:y:2022:i:c:s0360544222017868
    DOI: 10.1016/j.energy.2022.124883
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222017868
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124883?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ahmed, I. & Gupta, A.K., 2009. "Syngas yield during pyrolysis and steam gasification of paper," Applied Energy, Elsevier, vol. 86(9), pages 1813-1821, September.
    2. Kulkarni, Avanti & Baker, Ryan & Abdoulmomine, Nourredine & Adhikari, Sushil & Bhavnani, Sushil, 2016. "Experimental study of torrefied pine as a gasification fuel using a bubbling fluidized bed gasifier," Renewable Energy, Elsevier, vol. 93(C), pages 460-468.
    3. Akbari, Maryam & Oyedun, Adetoyese Olajire & Kumar, Amit, 2018. "Ammonia production from black liquor gasification and co-gasification with pulp and waste sludges: A techno-economic assessment," Energy, Elsevier, vol. 151(C), pages 133-143.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yin, Kexin & Wang, Yangyang & Wu, Qiming & Zhang, Jifu & Zhou, Yaru & Xu, Zaifeng & Zhu, Zhaoyou & Qi, Jianguang & Wang, Yinglong & Cui, Peizhe, 2024. "Thermodynamic analysis of a plasma co-gasification process for hydrogen production using sludge and food waste as mixed raw materials," Renewable Energy, Elsevier, vol. 222(C).
    2. HajiHashemi, MohammadSina & Mazhkoo, Shahin & Dadfar, Hossein & Livani, Ehsan & Naseri Varnosefaderani, Aliakbar & Pourali, Omid & Najafi Nobar, Shima & Dutta, Animesh, 2023. "Combined heat and power production in a pilot-scale biomass gasification system: Experimental study and kinetic simulation using ASPEN Plus," Energy, Elsevier, vol. 276(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shahbaz, Muhammad & Al-Ansari, Tareq & Inayat, Muddasser & Sulaiman, Shaharin A. & Parthasarathy, Prakash & McKay, Gordon, 2020. "A critical review on the influence of process parameters in catalytic co-gasification: Current performance and challenges for a future prospectus," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    2. Pio, D.T. & Gomes, H.G.M.F. & Tarelho, L.A.C. & Vilas-Boas, A.C.M. & Matos, M.A.A. & Lemos, F.M.S., 2022. "Superheated steam injection as primary measure to improve producer gas quality from biomass air gasification in an autothermal pilot-scale gasifier," Renewable Energy, Elsevier, vol. 181(C), pages 1223-1236.
    3. Ana B. Cuevas & David E. Leiva-Candia & M. P. Dorado, 2024. "An Overview of Pyrolysis as Waste Treatment to Produce Eco-Energy," Energies, MDPI, vol. 17(12), pages 1-32, June.
    4. Huang, Yu-Fong & Shih, Chun-Hao & Chiueh, Pei-Te & Lo, Shang-Lien, 2015. "Microwave co-pyrolysis of sewage sludge and rice straw," Energy, Elsevier, vol. 87(C), pages 638-644.
    5. Burra, K.G. & Hussein, M.S. & Amano, R.S. & Gupta, A.K., 2016. "Syngas evolutionary behavior during chicken manure pyrolysis and air gasification," Applied Energy, Elsevier, vol. 181(C), pages 408-415.
    6. María Pilar González-Vázquez & Roberto García & Covadonga Pevida & Fernando Rubiera, 2017. "Optimization of a Bubbling Fluidized Bed Plant for Low-Temperature Gasification of Biomass," Energies, MDPI, vol. 10(3), pages 1-16, March.
    7. M. N. Uddin & Kuaanan Techato & Juntakan Taweekun & Md Mofijur Rahman & M. G. Rasul & T. M. I. Mahlia & S. M. Ashrafur, 2018. "An Overview of Recent Developments in Biomass Pyrolysis Technologies," Energies, MDPI, vol. 11(11), pages 1-24, November.
    8. Ruivo, Luís & Silva, Tiago & Neves, Daniel & Tarelho, Luís & Frade, Jorge, 2023. "Thermodynamic guidelines for improved operation of iron-based catalysts in gasification of biomass," Energy, Elsevier, vol. 268(C).
    9. Fan Li & Dong Liu & Ke Sun & Songheng Yang & Fangzheng Peng & Kexin Zhang & Guodong Guo & Yuan Si, 2024. "Towards a Future Hydrogen Supply Chain: A Review of Technologies and Challenges," Sustainability, MDPI, vol. 16(5), pages 1-36, February.
    10. Pio, D.T. & Tarelho, L.A.C., 2021. "Industrial gasification systems (>3 MWth) for bioenergy in Europe: Current status and future perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    11. Molintas, H. & Gupta, A.K., 2011. "Kinetic study for the reduction of residual char particles using oxygen and air," Applied Energy, Elsevier, vol. 88(1), pages 306-315, January.
    12. Xu, Liya & Kong, Lingwei & Men, Xiaoyong & Guo, Feiqiang & Sun, Zhenjie & Dong, Kaiming & Tang, Biao & Wang, Jiajun & Zhao, Nanjin & Bai, Yonghui, 2024. "Facile synthesis of Ni-doped zeolite-based catalysts from waste coal gasification fine slag for steam reforming of toluene," Renewable Energy, Elsevier, vol. 231(C).
    13. Ahmed, I.I. & Gupta, A.K., 2013. "Experiments and stochastic simulations of lignite coal during pyrolysis and gasification," Applied Energy, Elsevier, vol. 102(C), pages 355-363.
    14. Nipattummakul, Nimit & Ahmed, Islam I. & Kerdsuwan, Somrat & Gupta, Ashwani K., 2012. "Steam gasification of oil palm trunk waste for clean syngas production," Applied Energy, Elsevier, vol. 92(C), pages 778-782.
    15. Zhang, Hanfei & Wang, Ligang & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic comparison of green ammonia production processes," Applied Energy, Elsevier, vol. 259(C).
    16. Yang, Xiaoxia & Gu, Shengshen & Kheradmand, Amanj & Kan, Tao & He, Jing & Strezov, Vladimir & Zou, Ruiping & Yu, Aibing & Jiang, Yijiao, 2022. "Tunable syngas production from biomass: Synergistic effect of steam, Ni–CaO catalyst, and biochar," Energy, Elsevier, vol. 254(PB).
    17. Zhang, Hanfei & Wang, Ligang & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2021. "Techno-economic comparison of 100% renewable urea production processes," Applied Energy, Elsevier, vol. 284(C).
    18. Evangelopoulos, Panagiotis & Kantarelis, Efthymios & Yang, Weihong, 2017. "Experimental investigation of the influence of reaction atmosphere on the pyrolysis of printed circuit boards," Applied Energy, Elsevier, vol. 204(C), pages 1065-1073.
    19. Akbari, Maryam & Oyedun, Adetoyese Olajire & Kumar, Amit, 2020. "Techno-economic assessment of wet and dry torrefaction of biomass feedstock," Energy, Elsevier, vol. 207(C).
    20. Kumar, Vineet & Malyan, Sandeep Kumar & Apollon, Wilgince & Verma, Pradeep, 2024. "Valorization of pulp and paper industry waste streams into bioenergy and value-added products: An integrated biorefinery approach," Renewable Energy, Elsevier, vol. 228(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:258:y:2022:i:c:s0360544222017868. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.