IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v237y2021ics0360544221018727.html
   My bibliography  Save this article

Steam methane reforming in a microchannel reformer: Experiment, CFD-modelling and numerical study

Author

Listed:
  • Pashchenko, Dmitry
  • Mustafin, Ravil
  • Mustafina, Anna

Abstract

This paper is devoted to the investigation of the steam methane reforming process in a microchannel reformer over a Ni-based catalyst. The composition of reforming products and temperature at a reformer outlet was measured experimentally as well as with the help of CFD-modeling and numerical study. The presented new direct numerical method for modeling of steam methane reforming. The study of steam methane reforming was performed for the inlet temperatures (Tin) of 600–1000 K, for Re = 10, 50, 100, and heat flux through the walls of qw = 1000 W/m2 and qw = 500 W/m2. It was found that the methane conversion in the reformer decreases with increasing Reynolds number, heat flux through the wall, and inlet temperature. For Re = 10, qw = 1000 W/m2 and Tin = 1000 K the methane conversion is 39% while equilibrium methane conversion is 63%. The temperature profiles in the reaction zone were determined. The temperature of the reaction mixture monotonically increases for all Reynolds numbers.

Suggested Citation

  • Pashchenko, Dmitry & Mustafin, Ravil & Mustafina, Anna, 2021. "Steam methane reforming in a microchannel reformer: Experiment, CFD-modelling and numerical study," Energy, Elsevier, vol. 237(C).
    • Handle: RePEc:eee:energy:v:237:y:2021:i:c:s0360544221018727
    DOI: 10.1016/j.energy.2021.121624
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221018727
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.121624?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pashchenko, Dmitry & Makarov, Ivan, 2021. "Carbon deposition in steam methane reforming over a Ni-based catalyst: Experimental and thermodynamic analysis," Energy, Elsevier, vol. 222(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shen, Yazhou & Nazir, Shareq Mohd & Zhang, Kai & Duwig, Christophe, 2023. "Waste heat recovery optimization in ammonia-based gas turbine applications," Energy, Elsevier, vol. 280(C).
    2. Pourali, Mostafa & Esfahani, Javad Abolfazli, 2022. "Performance analysis of a micro-scale integrated hydrogen production system by analytical approach, machine learning, and response surface methodology," Energy, Elsevier, vol. 255(C).
    3. Sven Gruber & Klemen Rola & Darko Goričanec & Danijela Urbancl, 2024. "Fully Integrated Hybrid Solid Oxide Fuel Cell–Rankine Cycle System with Carbon Capture, Utilisation, and Storage for Sustainable Combined Heat and Power Production," Sustainability, MDPI, vol. 16(11), pages 1-29, May.
    4. Pashchenko, Dmitry, 2023. "Hydrogen-rich gas as a fuel for the gas turbines: A pathway to lower CO2 emission," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Msheik, Malek & Rodat, Sylvain & Abanades, Stéphane, 2022. "Experimental comparison of solar methane pyrolysis in gas-phase and molten-tin bubbling tubular reactors," Energy, Elsevier, vol. 260(C).
    2. Tang, Xin-Yuan & Zhang, Kai-Ran & Yang, Wei-Wei & Dou, Pei-Yuan, 2023. "Integrated design of solar concentrator and thermochemical reactor guided by optimal solar radiation distribution," Energy, Elsevier, vol. 263(PB).
    3. Yang, Wei-Wei & Tang, Xin-Yuan & Ma, Xu & Li, Jia-Chen & Xu, Chao & He, Ya-Ling, 2023. "Rapid prediction, optimization and design of solar membrane reactor by data-driven surrogate model," Energy, Elsevier, vol. 285(C).
    4. Jiao, Kexin & Feng, Guangxiang & Zhang, Jianliang & Wang, Cui & Zhang, Lei, 2023. "Effect of multi-component gases on the behavior and mechanism of carbon deposition in hydrogen-rich blast furnaces," Energy, Elsevier, vol. 263(PA).
    5. Qi, Meng & Lee, Jaewon & Hong, Seokyoung & Kim, Jeongdong & Liu, Yi & Park, Jinwoo & Moon, Il, 2022. "Flexible and efficient renewable-power-to-methane concept enabled by liquid CO2 energy storage: Optimization with power allocation and storage sizing," Energy, Elsevier, vol. 256(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:237:y:2021:i:c:s0360544221018727. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.